These are the well known ports from IANA. Basically it means if you use one of these
adhoc you run the risk of breaking something - now or next week. Just because a port is unused right now does not mean it won't get used again soon.
Is there a reason you have to use low number ports?
Try something like this:
You could also create an array (port based) on the awk output and search through the array rather than using grep. Use the mapfile command, which creates an array named MAPFILE with every port number in it. You can also use associative arrays to speed up your search. None of this is really useful except when you are creating lots of ports.
I want to write a server application that would accept HTTP requests from client.
The server would be on a machine that has no connection to the INTERNET.
The clients that would be posting their HTTP requests would be doing so through webbrowser .Thus it would be sort of intranet application.... (0 Replies)
Hello Mentors!
I am a new here in the furom, i hope somebody can understand my problem.
Basically we have an application here called unigraphics and being installed per station and the setup is look like this.
1. installed unigraphics UGNX3 version on every station
2. some are installed in... (1 Reply)
Hello
im using sunos im trying to lock down application that taking my port
when Im doing "netstat -in | grep 8080"
Is gives me the indication that the port is taken but no indication who is taken the port.
How can I find out who is taking my port?
Thanks allot (7 Replies)
Dear Sir,
i m going to use NP5610-16 moxa device for multiport serial communication.
i m using fedora-core 6 o.s.
after installation it will detect serial ports as /dev/ttyr0,/dev/ttyr1...ttyr32.
there are total 32 com ports.
now i want to write application which monitor all serial ports and... (6 Replies)
Hi All,
I have two MQ (port) 1414 established (going out)
$ netstat -an | grep 1414
tcp 0 0 0.0.0.0:1414 0.0.0.0:* LISTEN
tcp 0 0 20.76.1.1:32855 142.8.1.3:1414 ESTABLISHED
tcp 0 0... (2 Replies)
Hi,
is there any command to findout that which application is using the particular port.
or whether any port is occupied with the specfic process id ? (4 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT DEBIAN
aconnect
aconnect(1) General Commands Manual aconnect(1)NAME
aconnect - ALSA sequencer connection manager
SYNOPSIS
aconnect [-d] [-options] sender receiver
aconnect -i|-o [-options]
aconnect -x
DESCRIPTION
aconnect is a utility to connect and disconnect two existing ports on ALSA sequencer system. The ports with the arbitrary subscription
permission, such as created by aseqview(1), can be connected to any (MIDI) device ports using aconnect. For example, to connect from port
64:0 to 65:0, run as follows:
% aconnect 64:0 65:0
The connection is one-way, and the whole data to the sender port (64:0) is redirected to the receiver port (65:0). When another port (e.g.
65:1) is attached to the same sender port, the data is sent to both receiver ports. For disconnection, use -d option.
% aconnect -d 64:0 65:0
The address can be given using the client's name.
% aconnect External:0 Emu8000:1
Then the port 0 of the client matching with the string "External" is connected to the port 1 of the client matching with the "Emu8000".
Another function of aconnect is to list the present ports on the given condition. The input ports, which may become sender ports, can be
listed with -i option.
% aconnect -i
client 0: 'System' [type=kernel]
0 'Timer '
1 'Announce '
client 64: 'External MIDI-0' [type=kernel]
0 'MIDI 0-0 '
Similarly, to see the output ports, use -o flag.
You can remove all existing exported connections using -x option. This function is useful for terminating the ALSA drivers, because the
modules with sequencer connections cannot be unloaded unless their connections are removed.
OPTIONS
CONNECTION MANAGEMENT
-d, --disconnect
Disconnect the given subscription.
-e, --exclusive
Connect ports with exclusive mode. Both sender and receiver ports can be no longer connected by any other ports.
-r, --real queue
Convert time-stamps of event packets to the current value of the given real-time queue. This is option is, however, not so useful,
since the receiver port must use (not necessarily own) the specified queue.
-t, --tick queue
Like -r option, but time-stamps are converted to the current value of the given tick queue.
LIST PORTS
-i, --input
List existing input (readable) ports. This option is exclusive to -o.
-o, --output
List existing output (writable) ports. This option is exclusive to -i.
-l, --list
List the current connection status. The connected and connecting ports from/to each port are listed together. The suffix flag [ex]
means the connection is exclusive. The suffix flag [real:#] and [tick:#] mean the connection includes real-time and tick conversion
on the listed queue, respectively.
REMOVE ALL CONNECTIONS
-x, --removeall
Remove all exported connections.
SEE ALSO aseqnet(1), aseqview(1)AUTHOR
Takashi Iwai <tiwai@suse.de>
August 31, 2000 aconnect(1)