Sponsored Content
Full Discussion: Problem Upgrading OS
Operating Systems AIX Problem Upgrading OS Post 303004282 by bobochacha29 on Friday 29th of September 2017 12:26:34 AM
Old 09-29-2017
Problem Upgrading OS

Hi

I've just upgraded OS - using "Migration with nimadm". The Nim master is a Power 6 server, and the source is 6100-09-04-1441.

The migration was successful with a Power 6 - Nim client, but there was a problem with Power 5 - Nim client : the OS remained 6100-00-09-0920

Code:
icapp1:/]oslevel -s                 
6100-00-09-0920
icapp1:/]lppchk -v                  
lppchk:  The following filesets need to be installed or corrected to bring
         the system to a consistent state:

  bos.perf.gtools.procmon 6.1.9.0         (not installed; requisite fileset)
  bos.rte v=5, r<4                        (not installed; requisite fileset)

icapp1:/]instfix -i | grep ML 
    All filesets for 6100-00_AIX_ML were found.
    Not all filesets for 6100-01_AIX_ML were found.
    Not all filesets for 6100-02_AIX_ML were found.
    Not all filesets for 6100-03_AIX_ML were found.
    Not all filesets for 6100-04_AIX_ML were found.
    Not all filesets for 6100-05_AIX_ML were found.
    Not all filesets for 6100-06_AIX_ML were found.
    All filesets for 6.1.0.0_AIX_ML were found.
    Not all filesets for 6100-07_AIX_ML were found.
    Not all filesets for 6100-08_AIX_ML were found.
    Not all filesets for 6100-09_AIX_ML were found.
icapp1:/]oslevel -sl 6100-09-04-1441
Fileset                                 Actual Level       Service Pack Level
-----------------------------------------------------------------------------
OpenGL.OpenGL_X.rte.soft                6.1.6.0            6.1.9.30       
X11.Dt.lib                              6.1.6.0            6.1.9.30       
X11.Dt.rte                              6.1.6.0            6.1.9.15       
bos.cifs_fs.rte                         6.1.6.0            6.1.9.30       
bos.loc.adt.iconv                       5.3.12.1           6.1.9.15       
bos.perf.gtools.procmon                 6.1.6.1            6.1.9.15

I've checked and figured out that: These filesets above didn't exist on the Power 6 - Nim client ( which was upgraded successfully ), and all filesets on Power 6 - Nim client existed on the Power 5 - Nim client ( which OS was still 6.1.0.0 ).

So I guess that there are some differences between Power 5 and Power 6. These remaining old filesets above are not upgraded and they made the OS remaining 6.1.0.0.

Is that right? And how to fix this ?

Last edited by rbatte1; 09-29-2017 at 07:13 AM.. Reason: Added some ICODE tags
 

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Upgrading to Solaris 8 from 2.6

Hello, First of all I don't know much about the different between sun or Solaris :confused: This is my scenario We have 6 WS and server running DNS, Oracle DB and Apache server. I type uname -a -- the result is "SunOS omjs06 5.6 Generic_105181-13 sun4u sparc SUNW,Ultra-2" I guess... (3 Replies)
Discussion started by: geoquest
3 Replies

2. UNIX for Dummies Questions & Answers

Upgrading Sudo

Hi all I am trying to upgrade Sudo on my Redhat Linu 7.0 box. I have obtained the latest version of Sudo (1.6.6) from http://www.courtesan.com/sudo/. THis is in the form of a src.rpm file. I am confused about installing this. How can I install from a source rpm. It does not upgrade the... (1 Reply)
Discussion started by: skotapal
1 Replies

3. AIX

Upgrading from 5.1.0.0 to 5.2.0.0

As a fairly new Administrator to AIX i am a little leary of the OS upgrade I need to do on one of our servers. I have already upgraded the microcode to the lastest level and now need to do the OS. I have the docs and discs from IBM and have determined that I dont want to do a new installation but... (5 Replies)
Discussion started by: Target
5 Replies

4. Filesystems, Disks and Memory

Upgrading PC Memory

hello folks, I am planning to upgrade my PC's ram. currently the ram I have is 2x256MB=512MB/133MHz (DDR266) - DDR SDRAM, PC-2100. My guess is that it has 184 Pins. I would like to get a DDR2 with 667MHz, 240 pin. Is it possible, since pins don't match. Do they have to match? (there are 3... (4 Replies)
Discussion started by: milhan
4 Replies

5. Solaris

Problem with Upgrading firmware on X4500

I have X4500 running solaris 10 with 5.10 version. The ILOM version is 1.1.1 and I want to upgrade the firmware. I setup the TFTP server on my machine using the following link. A P P E N D I X C - Updating the Firmware I could install the tftp server and could transfer a file as well. When I... (1 Reply)
Discussion started by: bharu_sri
1 Replies

6. UNIX for Dummies Questions & Answers

Upgrading Apache

Hi I run FEDORA CORE 4 and I have been asked to upgrade the apache to the latest version--this machine is using 2.0.54 Apache which is really OLD. The problem is that upgrading the RPM fails because of all these dependencies. Those dependencies in turn have other dependencies. I am new to... (1 Reply)
Discussion started by: mojoman
1 Replies

7. AIX

Upgrading OS from 5.2 to 5.3

We currently have test and production servers running AIX 5.2, DB2 8.1(Prod), DB2 8.2(Test),Websphere 6.1 on both. We need to upgrade to DB2 to version 9, but to do that we also need to upgrade the operating system to 5.3 and go from 32 bit kernel to 64 bit kernal. Looking for information on any... (3 Replies)
Discussion started by: jyoung
3 Replies

8. Solaris

Facing problem after upgrading the kernal patch level to 142900-12

I have a Solaris 10 OS having kernal patch level 138888-03 on several servers but recenlty I upgraded it into 142900-12 on some T-Series servers & v890 server after install them my syslog is increasing at a rate of 1GB on average on all servers . I believe its a bug, can somebody help me in... (1 Reply)
Discussion started by: sb200
1 Replies

9. Ubuntu

Encountering problem on upgrading the packages

Hi folks, Ubuntu 9.04 I have an old box not running for years. I just dig it out from the store room. On running; $ sudo aptitude update ...... ...... Err http://hk.archive.ubuntu.com jaunty/main Packages 404 Not Found Err http://hk.archive.ubuntu.com jaunty/restricted Packages ... (1 Reply)
Discussion started by: satimis
1 Replies
BOS_HELP(8)						       AFS Command Reference						       BOS_HELP(8)

NAME
bos_help - Displays help for bos commands SYNOPSIS
bos help [-topic <help string>+] [-help] bos h [-t <help string>+] [-h] DESCRIPTION
The bos help command displays the complete online help entry (short description and syntax statement) for each command operation code specified by the -topic argument. If the -topic argument is omitted, the output includes the first line (name and short description) of the online help entry for every bos command. To list every bos command whose name or short description includes a specified keyword, use the bos apropos command. OPTIONS
-topic <help string>+ Indicates each command for which to display the complete online help entry. Omit the bos part of the command name, providing only the operation code (for example, specify status, not bos status). If this argument is omitted, the output briefly describes every bos command. -help Prints the online help for this command. All other valid options are ignored. OUTPUT
The online help entry for each bos command consists of the following two or three lines: o The first line names the command and briefly describes its function. o The second line lists aliases for the command, if any. o The final line, which begins with the string "Usage", lists the command's options in the prescribed order. Online help entries use the same symbols (for example, brackets) as the reference pages in this document. EXAMPLES
The following command displays the online help entry for the bos status command: % bos help status bos status: show server instance status Usage: bos status -server <machine name> [-instance <server process name>+] [-long] [-cell <cell name>] [-noauth] [-localauth] [-help] PRIVILEGE REQUIRED
None SEE ALSO
bos(8), bos_apropos(8) COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved. This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell. OpenAFS 2012-03-26 BOS_HELP(8)
All times are GMT -4. The time now is 06:48 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy