I have installed a new SCSI drive into an HP6000-SE SCSI tower conencted to an old HP9000. This device cannot be detected by SAM. HOWEVER, when doing an ioscan -f I get:
======================================================================
bc 0 root CLAIMED BUS_NEXUS
bc 1 56 bc CLAIMED... (3 Replies)
I have installed a new SCSI drive into an HP6000-SE SCSI tower conencted to an old HP9000. This device cannot be detected by SAM. HOWEVER, when doing an ioscan -f I get:
======================================================================
bc 0 ... (2 Replies)
I need more space on my Ultra 10, and was thinking of a pair of 60 or 80 GB 7200 rpm ATA/100 drives mirrored with DiskSuite. Will afterarket IDE drives work in the Sun box? Are there any issues? (1 Reply)
I am looking for a Disk Drive for SGI Octane with Irix 6.4 .
I was just hoping if someone out there can give me the
vendor and part number ... Need a 9GB hopefully. (1 Reply)
Pointing one hard drive name to another disk
--------------------------------------------------------------------------------
I have 2 disk drives - s2d9 & s2d11 on a solaris Unix system
It was mapped so that anything that tried to call s2d9 would be pointed to s2d11 since s2d9 was bad.... (2 Replies)
I thought I would post it again..once a bad drive is replaced need to rebuild it right?? Is disk and drive same? So what command need when the disk gets replaces. When i did diskinfo...and found out the bad disk...and need to replace that..
Thanks if someone could answer this question i have. (1 Reply)
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Hi Guys,
I have an external USB Hard Disk Drive on which I have 3 partitions and it works fine under Windows XP but when I am using Red Hat Linux 5 I don't see any icon for this USB HDD. Also I am not able to browse my USB Pen Drive. However, I can use it under Mandrake Linux without any... (4 Replies)
Hello,
This is my first post :)
I wondered if it would be possible to connect a unix machine via USB as a disk drive in the same way as Android devices connects to the computers.
The idea is to connect my debian machine to the television, that is compatible with USB pendrives. Then, the... (3 Replies)
Discussion started by: Strife
3 Replies
LEARN ABOUT OSX
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)