Did you solve the other problem that you were having last week?
no
rbatte1 -
What have you tried to solve this so far?
I have purged and reinstalled CUPS and rebooted. It did not help.
What output/errors do you get?
Code:
Message from syslogd@server1 at Sep 7 10:47:48 ...
cupsd: Unable to read "/etc/cups/cupsd.conf" due to errors.
Broadcast message from systemd-journald@server1 (Thu 2017-09-07 10:47:48 EDT):
cupsd[19267]: Unable to read "/etc/cups/cupsd.conf" due to errors.
What OS and version are you using?
Debian8.5
Is CUPS installed
Code:
server1@server1:~$ dpkg -s cups
Package: cups
Status: install ok installed
Is the cups service started?
Code:
root@server1:/home/server1# service cups stop
Warning: Stopping cups.service, but it can still be activated by:
cups.path
root@server1:/home/server1# service cups start
root@server1:/home/server1#
Broadcast message from systemd-journald@server1 (Sat 2017-09-09 23:31:35 EDT):
cupsd[32182]: Unable to read "/etc/cups/cupsd.conf" due to errors.
Message from syslogd@server1 at Sep 9 23:31:35 ...
cupsd: Unable to read "/etc/cups/cupsd.conf" due to errors.
---------- Post updated 09-10-17 at 12:18 AM ---------- Previous update was 09-09-17 at 11:36 PM ----------
Here is cupsd.conf
Code:
root@server1:/home/server1# cat /etc/cups/cupsd.conf
# Show general information in error_log.
LogLevel warn
MaxLogSize 0
Listen /var/run/cups/cups.sock
Listen /var/run/cups/cups.sock
Browsing On
BrowseLocalProtocols dnssd
DefaultAuthType Basic
WebInterface Yes
<Location /admin>
Order allow,deny
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
</Location>
<Policy default>
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
<Policy authenticated>
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Location />
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
</Location>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
<Location />
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
</Location>
</Policy>
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
Hi,
Can anybody provide me the download link for CUPS on HP-UX 11i?
and point me where i can get thorough help or howtos, certainly detailed, to get cups and hopefully
my printer running?
Thanks in advance. (6 Replies)
hi there,
i am attempting to recognize a network printer on my red hat box. i know the IP, i have procured the correct driver, however, CUPS (nor the add printer utility) doesn't recognize the driver nor the printer type. i am assuming this has to do with the location of the driver. can anyone... (8 Replies)
Hi guys,
I'm trying to install a newer version of CUPS and my compilation fails:
# ./configure
checking for gawk... gawk
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling...... (4 Replies)
Hi All,
Having searched for a solution to this issue i found no suggestions which help my particular problem.
I am getting the following error message on 1 of the 3 printers i have configured:
recoverable: Network host 'xxx.xxx.xxx.xxx' is busy; will retry in 30 seconds
All 3 printers are... (0 Replies)
Hello Experts,
I have been facing an issue with printing through cups configured on Linux server.
All was going on well but all of a sudden the printers started giving an error message, "Unsupported format application/postscript!" and we cant get any prints of any printer.
Need your help as... (2 Replies)
A little background information:
We are a company that uses Sharp MFP devices for everyone to print on.
We have a lot of MAC BYOD devices.
All printing is done through a product called PaperCut which is ran on a Windows 2008 R2 server.
Sharp charges our company for each print job done in... (1 Reply)
I am running cups 2.0.2 on solaris 11, trying to get CUPS to report the page count of what was printed correctly.
Right now I have the printer configured as post script both on solaris and on the windows box i am printing from.
What happens is that when i print more pages than 2, the page count... (0 Replies)
Hi,
I just set up a CUPS server for my printers and want every computer in my home to use it. To connect to the print server with my Ubuntu 14.04 as a client which possibilities are there, if I don't want to use a client.conf in /etc/cups/ (1 Reply)
I'm currently running a CUPS server and it shows the printers on other computers just fine, but after a while they disappear. I found out, that restarting /etc/init.d/cups-browsed fixes the problem (for about 15min).
When the printers disappear, the cups-browsed service is still running, so I... (0 Replies)