08-09-2017
your vfstab does not show mountpoints for this LUNs. it might be another filesystem like zfs. do you see an output issuing "zpool status"?
10 More Discussions You Might Find Interesting
1. HP-UX
Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch.
Any... (0 Replies)
Discussion started by: Hils
0 Replies
2. Solaris
Hi All,
I recently got a connection to the SAN through a fibre channel on my solaris box:
#luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
#ls -l /dev/cfg
lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc
I then... (2 Replies)
Discussion started by: dede
2 Replies
3. Red Hat
Hello,
How can I identify SAN disks not in use by the OS?
Thank you. (8 Replies)
Discussion started by: asanchez
8 Replies
4. Solaris
How to identify the server is BOOT FROM SAN.
Also how one can find from which device it is booted?
Thanks
Rahul
Double post, continued here (0 Replies)
Discussion started by: rahul.kurumkar
0 Replies
5. Red Hat
Hi, I have many servers all of these are boot from SAN. Can anybody let me know that how to identify the server is Boot fron SAN and from which device?
Thanks
Rahul (1 Reply)
Discussion started by: rahul.kurumkar
1 Replies
6. HP-UX
Hello gurus,
I am a SAN Admin - not very familiar with the HPUX administration - so need help with the steps in regards to the migration I need to do at my client place.
Environment: Migrating from CX4 to VMAX - using OR/Hot Pull.
Here are the steps I have put together - HPUX gurus please... (5 Replies)
Discussion started by: jps460
5 Replies
7. AIX
Hi all,
We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP.
Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Discussion started by: ElizabethPJ
10 Replies
8. HP-UX
Hi,
I am very new to HP-UX, and we're going to be doing a SAN migration.
We're going to take down the machine, and zone it to the new SAN.
My question is, will the device names change and will that interfere with the LVM?
If the new disks come in with different device names, how would I... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies
9. AIX
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
Discussion started by: BG_JrAdmin
4 Replies
10. Linux
Hi
I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o
GNU/Linux
I have first run the df -h and got the following:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies
LEARN ABOUT CENTOS
grub2-fstest
GRUB-FSTEST(3) Library Functions Manual GRUB-FSTEST(3)
NAME
grub-fstest -- Debug tool for GRUB's filesystem driver.
SYNOPSIS
grub-fstest [-c | --diskcount=NUM] [-C | --crypto]
[-d | --debug=STRING] [-K | --zfs-key=FILE|prompt]
[-n | --length=NUM] [-r | --root=DEVICE_NAME]
[-s | --skip=NUM] [-u | --uncompress] [-v | --verbose]
IMAGE_PATH <blocklist FILE | cat FILE |
cmp FILE LOCAL | cp FILE LOCAL | crc FILE |
hex FILE | ls PATH | xnu_uuid DEVICE>
DESCRIPTION
grub-fstest is a tool for testing GRUB's filesystem drivers. You should not normally need to run this program.
OPTIONS
--diskcount=NUM
Specify the number of input files.
--crypto
Mount cryptographic devices.
--debug=STRING
Set debug environment variable.
--zfs-key=FILE|prompt
Load ZFS cryptographic key.
--length=NUM
Handle NUM bytes in output file.
--root=DEVICE_NAME
Set root device.
--skip=NUM
Skip NUM bytes from output file.
--uncompress
Uncompress data.
--verbose
Print verbose messages.
COMMANDS
blocklist FILE
Display block list of FILE.
cat FILE
Display FILE on standard output.
cmp FILE LOCAL
Compare FILE with local file LOCAL.
cp FILE LOCAL
Copy FILE to local file LOCAL.
crc FILE
Display the CRC-32 checksum of FILE.
hex FILE
Display contents of FILE in hexidecimal.
ls PATH
List files at PATH.
xnu_uuid DEVICE
Display the XNU UUID of DEVICE.
SEE ALSO
info grub
Wed Feb 26 2014 GRUB-FSTEST(3)