I just P2V an old machine running Redhat 5.5 on a physical server. After P2V was completed, when boot up it got an error. Please refer to the attachment for the error. Please assist. Thanks.
Hi,
I'm not sure if this is the right forum to post.
I had following setup before installing SUSE Linux:
Windows 98 installed on Primary partition
Windows XP installed on Extended Partition
When I installed SUSE, it shared space from primary partition and shrunk the size of Windows... (4 Replies)
I had installed solaris 10 on 440 on disk 0. I had done ufsrestore on disk1 from tape and then rebooted
Rebooting with command: boot disk1
Boot device: /pci@1f,700000/scsi@2/disk@1,0 File and args:
SunOS Release 5.10 Version Generic_118833-24 64-bit
Copyright 1983-2006 Sun Microsystems,... (3 Replies)
Hi friends I am newbiee to MACOS ,the thing is that i installed MAC OS X86 10.5.6 into my VAIO-VGN-CR343N series without any problem and after rebooting I was unable to boot into macos and tried options like -v -f but no progress..can somebody help me (1 Reply)
I have a problem with one of my Sun 280R servers.
I'm unable to boot it. I've managed to get to the {ok} prompt from the RSC card.
Please see output below
ok show-devs
/virtual-memory
/memory
/aliases
/options
/openprom
/chosen
/packages
/openprom/client-services... (2 Replies)
Hello,
I have a test PC running Fedora 10. Friday evening it was working fine, I have some perl scripts which are scheduled to run every morning.
But when I started work this morning, I found I cannot ping the machine. When I switched on the monitor, I saw the GRUB promt :(. I am not sure... (10 Replies)
This is what is displayed on the screen as the system tries to boot and then hangs:
0>Test CPU(s)....Done
0>Interrupt Crosscall....|
SC Alert: DHCP negotiation failed, perhaps misconfigured or no DHCP server avail
able
Done
0>Init Memory....|
SC Alert: Host System has Reset
'Done
0>PLL... (2 Replies)
hi guys,
I was using kernel-3.1.2-1 in fedora 16. then updated to kernel-3.1.4-1. after reboot now grub shows command prompt instead of boot menu. i tried to load manually with:
set root=(hd0,msdos3)
linux /vmlinuz-3.1.4-1.fc16.x86_64
initrd /initramfs-3.1.4-1.fc16.x86_64.imgbut in the middle... (0 Replies)
Update:
The / file system (/dev/rdsk/c1t0d0s0) is being checked
fsck unable to stat
WARNING - unable to repair the / filesystem. Run fsck manually (fsck -F ufs /dev/rdsk/c1t0d0s0).
Root password for system maintenance (control-d to bypass):
I am unable to hit control-d to by pass.
I... (50 Replies)
Hi;
I had Windows Server 2003 and performed a fresh Ubuntu Server 15 installation.
After installation, Ubuntu server not booting
I guess there is boot problem conflicting with my old Windows Server.
This is my pastebin:
http://paste.ubuntu.com/13851828/
Any help to start my new... (1 Reply)
Discussion started by: gc_sw
1 Replies
LEARN ABOUT SUNOS
drmach
dr(7d) Devices dr(7d)NAME
dr, drmach, ngdr, ngdrmach - Sun Enterprise 10000 dynamic reconfiguration driver
SYNOPSIS
dr
drmach
ngdr
ngdrmach
DESCRIPTION
The dynamic reconfiguration (DR) driver consists of a platform-independent driver and a platform-specific module. The DR driver uses stan-
dard features of the Solaris operating environment whenever possible to control DR operations and calls the platform specific module as
needed. The DR driver creates minor nodes in the file system that serve as attachment points for DR operations.
The DR driver provides a pseudo-driver interface to sequence attach and detach operations on system boards using file system entry points
referred to as "attachment points." The attachment point form depends on the platform.
Sun Enterprise 10000 Server
On the Sun Enterprise 10000 server, the DR driver consists of a platform-independent driver (ngdr) and a platform-specific module (ngdr-
mach).
The domain configuration server (DCS) accepts DR requests from the system services processor (SSP) and uses the libcfgadm(3LIB) interface
to initiate the DR operation. After the operation is performed, the results are returned to the SSP. For more information about the DCS on
the Sun Enterprise 10000, refer to the dcs(1M) man page and the Sun Enterprise 10000 Dynamic Reconfiguration User Guide.
The DR driver creates physical attachment points for system board slots that takes the following form:
/devices/pseudo/ngdr@0:SBx
Where x represents the slot number (0 to 15) for a particular board.
The cfgadm_sbd(1M) plugin creates dynamic attachment points that refer to components on system boards, including CPUs, memory, or I/O
devices. Refer to the cfgadm_sbd(1M) man page for more details.
SEE ALSO cfgadm_sbd(1M), ioctl(2), libcfgadm(3LIB)
Sun Enterprise 10000 Dynamic Reconfiguration User Guide
SunOS 5.10 29 Sep 2003 dr(7d)