My experience is with older stuff but this is what was required:
Since there is no hardware link to a new device the first step is to create it"
which creates the link in /dev
Then create the identity for the file systems you want on it:
In my case
creating names and sizes
And last, creating the file system(s) and mount points:
In my case
for each file system you created earlier. My systems had provisions for the formatting and mounting conditions as part of this. Since you are doing this for a removable unit you wouldn't want to automatically mount it unless you are planning to reboot each time you make a change.
i have a Simple Tech hard drive that i use between two computers. it is formatted to ntfs. i have a dell desktop with Ubuntu 7.10 and Ubuntu 8.04 and Windows XP Home. and i have a laptop with Ubuntu 7.10 and Ubuntu 8.04. the laptop recognizes the hard drive on both 8.04 and 7.10 but my desktop... (9 Replies)
Can anyone please walk me through how to mount an external parallel (or scsi) hard drive in visualize C3000 machine? I also would like to mount "/var/sallie" directory in that external drive. My "/var/sallie" directory is running out of space so I would like to mount an external hard drive so that... (0 Replies)
Hi-
I would like to know if anyone has used any USB External Hard Drive, about 500/750GB or 1TB, with any of the Solaris 10 "SPARC" systems. Not on intel nor amd platform.
I'm looking for the compatible drive and found a few listed on Sun solaris ready page, but I'd like to have inputs from... (3 Replies)
Guys,
I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem.
I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80.
I connected it powered it up and at OK prompt did : boot -r
system comes up and complains about not... (6 Replies)
Hi Folks,
First a little background, I am working on a ship that operates in the Indian Ocean and Persian/Arabian gulf area. We had a Sunblade 2000 that finally died. The Video board burned up and I guess damaged the mother board. So we ordered 2 rebuilt 2000s one as a spare. Due to mounting... (1 Reply)
Hello
I have a new project being kicked off next month and i should learn UNIX fast. I have never used UNIX before so i have the following questions:
1) Is any UNIX free to install?
2) Can i install and boot UNIX from an External Hard Drive (The system board on my laptop crashed so i took the... (2 Replies)
Hi Guys..
I want to install Linux on my portable hard drive.
I created a 20GB partition in my hard drive for linux, Now I want to make it bootable mean when I connect it to system n start the system it will start the LINUX and when start without usb-hard drive it should start the windows.
... (3 Replies)
Discussion started by: atul9806
3 Replies
LEARN ABOUT CENTOS
volcheck
volcheck(1) User Commands volcheck(1)NAME
volcheck - checks for media in a drive and by default checks all floppy media
SYNOPSIS
volcheck [-v] [-i secs] [-t secs] pathname
DESCRIPTION
The volcheck utility tells Volume Management to look at each dev/pathname in sequence and determine if new media has been inserted in the
drive.
The default action is to volcheck all checkable media managed by volume management.
OPTIONS
The following options are supported:
-i secs Set the frequency of device checking to secs seconds. The default is 2 seconds. The minimum frequency is 1 second.
-t secs Check the named device(s) for the next secs seconds. The maximum number of seconds allowed is 28800, which is 8 hours. The fre-
quency of checking is specified by -i. There is no default total time.
-v Verbose.
OPERANDS
The following operands are supported:
pathname The path name of a media device.
EXAMPLES
Example 1: A sample of the volcheck command.
The following example
example% volcheck -v /dev/diskette
/dev/diskette has media
asks Volume Management to examine the floppy drive for new media.
The following example
example% volcheck -i 2 -t 600 /dev/diskette1 &
asks Volume Management if there is a floppy in the floppy drive every 2 seconds for 600 seconds (10 minutes).
FILES
/dev/volctl Volume Management control port
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWvolu |
+-----------------------------+-----------------------------+
SEE ALSO eject(1), volcancel(1), volmissing(1)rmmount(1M), vold(1M), rmmount.conf(4), vold.conf(4), attributes(5), volfs(7FS)WARNINGS
Due to a hardware limitation in many floppy drives, the act of checking for media causes mechanical action in the floppy drive. Continu-
ous polling of the floppy drive will cause the drive to wear out. It is recommended that polling the drive only be performed during periods
of high use.
SunOS 5.10 21 Feb 1997 volcheck(1)