envy24control(1)														  envy24control(1)

NAME

       envy24control - GUI control tool for Envy24 (ice1712) based soundcards, under ALSA.

SYNOPSIS

       envy24control  [-c  card-number]  [-D control-name] [-o 0-num DACs max 8] [-i 0-num ADCs max 8] [-p 0-8] [-s 0-2] [-f <profiles file name>]
       [-v] [<profile number>|<profile name>] [-m midi-channel] [-M] [-w window-width] [-t 0-9]

DESCRIPTION

       envy24control allows control of the digital mixer, channel gains and other hardware settings for sound cards based on the  ice1712  chipset
       (Midiman Delta series, Terratec EWS and EWX series). It also displays a level meter for each input and output channel.

INVOKING

       envy24control  [-c  card-number]  [-D control-name] [-o 0-num DACs max 8] [-i 0-num ADCs max 8] [-p 0-8] [-s 0-2] [-f <profiles file name>]
       [-v] [<profile number>|<profile name>] [-m midi-channel] [-M] [-w window-width] [-t 0-9]

       If no control-name is given, then the first sound card is used.

   Options
       -c card-number
	      Use the card specified by card-number rather than the first card.  This is equivalent with -Dhw:n option where n is the card number.

       -D control-name
	      Use the card specified by control-name rather than the first card, normally this will be of the form hw:n where n is the sound  card
	      number (zero-based). This is only needed if you have more than one Envy24-based card or if your Envy24 card is not configured as the
	      first card in your ALSA driver setup.

       -o outputs
	      Limit number of analog line outputs to display.  Default is the number of DACs in the driver specification. Maximum is 8.  The  num-
	      ber of analog output lines can only be reduced from the available number of output lines.

       -i inputs
	      Limit number of analog line inputs to display.  Default is the number of ADCs in the driver specification. Maximum is 8.	The number
	      of analog input lines can only be reduced from the available number of input lines.

       -p pcm outputs
	      Limit number of PCM outputs to display.  Default is 8.

       -s spdif inputs/outputs
	      Limit number of SPDIF inputs/outputs to display.	Default is 2.

       -f name and path of the profiles file name.
	      From/to this file will envy24control read/write the alsactl  settings.   If  is  not  given  DEFAULT_PROFILERC  or  for  restore	if
	      DEFAULT_PROFILERC doesn't exists SYS_PROFILERC will be used.

       -v view spdif playback channels in the mixer.
	      It  is  not  possible to manage something (muting, volume levels).  It is only to view the levelmeters.  Default is no view of spdif
	      playback channels in the mixer.

       -m midi-channel
	      Use MIDI controller values to control the Faders in the mixer view.  The application will react to controllers on channel midi-chan-
	      nel and send controllers on this channel when the user moves the GUI sliders.

       -M     Use an enhanced mapping from midi controller values to db sliders.

       -w window-width
	      Specify  the initial width of the envy24control window.  Using window-width in the range 0-20 specifies approx number of mixer chan-
	      nels visible.  Values >20 are interpreted as screen pixels.

       -t tall-equal mixer heights
	      Using -t 1 enlarges the channel mixers to the same height as the digital mixer.	With  values  >1  the  height  of  all	mixers	is
	      increased in stages.  -t 0 is the default, set for minimum window height.

SEE ALSO

	alsamixer(1), amixer(1), gamix(1)

AUTHOR

       envy24control  is   by  Jaroslav  Kysela <perex@perex.cz> This document is by James Tappin <james@xena.uklinux.net>.  Updated by Dirk Kalis
       <dirk.kalis@t-online.de>.  Options-w and -t added Alan Horstmann <gineera@aspect135.co.uk>

								   30 July 2005 						  envy24control(1)