if I run the discovery command:
so it does seem to me that there is comms between the server and the NetApp
And if I run fdisk -l it shows a LUN of 898Gb, but I dont know if this LUN is the newly added one or an existing one:
Is it possible the commands to check if this is the new one?
---------- Post updated at 03:27 PM ---------- Previous update was at 03:24 PM ----------
/dev/sdb
Last edited by fretagi; 06-01-2017 at 10:26 AM..
Reason: add more info
Hi,
I have a csv file. I need to add one column at begining of the file, It just contains one value "amr". I am able to add column but unable to put title to it.
Input Data:
call_id,conn_id,result,ani
1,100,hungup,7601234
2,101,hungup,7601235
Desired Output:
... (6 Replies)
hi all,
i have added new LUN to Redhat 5. i have already scanned LUN devices and it is confirmed that Kernel sees the newly added LUN's. i have used /proc/partitions and verified that my disks are there.
However, i cannot find my disk using fdisk -l command. I am not sure what did i... (2 Replies)
Hi,
I just forgot what command we can use to open a file, and then see its updates, I remember that there is an option -f ,but with what command :wall:
Tx
Trent (1 Reply)
Hi Everyone,
I have added new Virtual disk to OS. The main point is I need to bring this whole Disk into LVM control, is it necessary to partition the disk using fdisk command and assign partition type as '8e', or can I directly add that disk into LVM, by running pvcreate command with out... (2 Replies)
hello,
i am an oracle DBA and trying to scan a newly created LUN of 200 GB on fiber channel by SAN admin.we have solaris 10 and SANtoolkit is installed.i tried following to get the new LUN at my machine. go /opt/Netapp/Santoolkit/bin and then ./sanlun lun show but i see only the existing... (12 Replies)
Calling all Linux GURU's.
The purpose of this thread is to try an recreate what we already have stood up in my environment, however the steps i am having to produce my own.
I have got multiple applications that dump the data to various LUNs, the LUNs are managed by an Enterprise SAN... (11 Replies)
Hi ,
I have created one new lun in my SAN storage and make it visible to my HP servers , but the fdisk -l output is somehow confusing. Do not know what to do next ----------
fdisk -l /dev/sdo1
Disk /dev/sdo1 (Sun disk label): 64 heads, 32 sectors, 10238 cylinders
Units =... (7 Replies)
My project is on solaris 10 using cvs 1.12.13. A team member has added a new file to the repo using the add command followed by commit. When another team member executes the status command in the directory containing the new file they do not get notifiction that there is a file that needs to be... (0 Replies)
Hi Folks,
I am unable to detected newly added HDD in my redhat-5 OS.
I am expecting to get /dev/sdb.
Following are the utilized commands or syntax.
root@hostname% cat /etc/redhat-release
Red Hat Enterprise Linux Client release 5.4 (Tikanga) echo "- - -" > /sys/class/scsi_host/host0/scan %... (1 Reply)
Hi
I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o
GNU/Linux
I have first run the df -h and got the following:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_outsystemdb-lv_root
50G 2.7G 45G ... (3 Replies)
Discussion started by: fretagi
3 Replies
LEARN ABOUT DEBIAN
linux
LINUX(4) BSD Kernel Interfaces Manual LINUX(4)NAME
linux -- Linux ABI support
SYNOPSIS
To compile support for this ABI into an i386 kernel place the following line in your kernel configuration file:
options COMPAT_LINUX
for an amd64 kernel use:
options COMPAT_LINUX32
Alternatively, to load the ABI as a module at boot time, place the following line in loader.conf(5):
linux_load="YES"
DESCRIPTION
The linux module provides limited Linux ABI (application binary interface) compatibility for userland applications. The module provides the
following significant facilities:
o An image activator for correctly branded elf(5) executable images
o Special signal handling for activated images
o Linux to native system call translation
It is important to note that the Linux ABI support it not provided through an emulator. Rather, a true (albeit limited) ABI implementation
is provided.
The following sysctl(8) tunable variables are available:
compat.linux.osname Linux kernel operating system name.
compat.linux.osrelease Linux kernel operating system release. Changing this to something else is discouraged on non-development systems,
because it may change the way Linux programs work. Recent versions of GNU libc are known to use different syscalls
depending on the value of this sysctl.
compat.linux.oss_version Linux Open Sound System version.
The linux module can be linked into the kernel statically with the COMPAT_LINUX kernel configuration option or loaded as required. The fol-
lowing command will load the module if it is neither linked into the kernel nor already loaded as a module:
if ! kldstat -v | grep -E 'linux(aout|elf)' > /dev/null; then
kldload linux > /dev/null 2>&1
fi
Note that dynamically linked Linux executables will require a suitable environment in /compat/linux. Specifically, the Linux run-time
linker's hints files should be correctly initialized. For this reason, it is common to execute the following commands to prepare the system
to correctly run Linux executables:
if [ -x /compat/linux/sbin/ldconfig ]; then
/compat/linux/sbin/ldconfig -r /compat/linux
fi
For information on loading the linux kernel loadable module automatically on system startup, see rc.conf(5). This information applies
regardless of whether the linux module is statically linked into the kernel or loaded as a module.
FILES
/compat/linux minimal Linux run-time environment
/compat/linux/proc limited Linux process file system
/compat/linux/sys limited Linux system file system
SEE ALSO brandelf(1), elf(5), linprocfs(5), linsysfs(5)HISTORY
Linux ABI support first appeared in FreeBSD 2.1.
BSD February 8, 2010 BSD