Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Unable to see controller C1 on Solaris 8
Operating Systems Solaris Unable to see controller C1 on Solaris 8 Post 302998322 by phanidhar6039 on Tuesday 30th of May 2017 06:38:33 AM
Old 05-30-2017
Apologies for not replying.

Yes i did try breaking the mirror and remake previously but still getting the error.

Code:
bash-2.03# cat /var/adm/messages.0
May 21 09:19:12 xxxx  scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:12 xxxx        Error for Command: write(10)               Error Level: Retryable
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  Requested Block: 45410506                  Error Block: 45410512
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  Vendor: FUJITSU                            Serial Number: 0302V77103_a
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  Sense Key: Hardware Error
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  ASC: 0x3 (<vendor unique code 0x3>), ASCQ: 0x80, FRU: 0x0
May 21 09:19:13 xxxx scsi: [ID 243001 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0 (fcp0):
May 21 09:19:13 xxxx        FCP: WWN 0x500000e010279761 reset successfully
May 21 09:19:13 xxxx scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:13 xxxx        Error for Command: write(10)               Error Level: Retryable
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  Requested Block: 45410506                  Error Block: 45410512
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  Vendor: FUJITSU                            Serial Number: 0302V77103_a
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  Sense Key: Hardware Error
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  ASC: 0x3 (<vendor unique code 0x3>), ASCQ: 0x80, FRU: 0x0
May 21 09:19:14 xxxx scsi: [ID 243001 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:14 xxxx        SCSI transport failed: reason 'reset': retrying command
May 21 09:19:15 xxxx scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:15 xxxx        Error for Command: write(10)               Error Level: Retryable
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  Requested Block: 45410506                  Error Block: 45410512
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  Vendor: FUJITSU                            Serial Number: 0302V77103_a
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  Sense Key: Hardware Error
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  ASC: 0x3 (<vendor unique code 0x3>), ASCQ: 0x80, FRU: 0x0
May 21 09:19:16 xxxx md_stripe: [ID 641072 kern.warning] WARNING: md: d13: write error on /dev/dsk/c1t0d0s4
May 21 09:19:17 xxxx md_mirror: [ID 104909 kern.warning] WARNING: md: d13: /dev/dsk/c1t0d0s4 needs maintenance
May 27 01:00:07 xxxx explorer: [ID 702911 daemon.notice] Explorer started
May 27 01:04:33 xxxx explorer: [ID 702911 daemon.notice] Explorer finished

if i go with changing the disk then i cant see the controller to make this disk offline.

Running out of ideas for fixing this.

Thanks,
P
 

10 More Discussions You Might Find Interesting

1. Solaris

Unable to uninstall package in Solaris

I am getting the below mentioned error while trying to unistall a package from a 2.8 Solaris box. Please help.. pkgrm: ERROR: unable to determine current run-state Removal of <PDMgr> failed (internal error). No changes were made to the system. (1 Reply)
Discussion started by: chrisanto_2000
1 Replies

2. Filesystems, Disks and Memory

HD Controller does not Work in Solaris

Hi, I'm attempting to build a raid Z NAS using solaris, but I only have 4 sata ports on my MB, so I bought a Rosewill RC-211 PCIe controller (adds 2 sata II ports). I'm new to solaris, but I understand that to add a new drive, you first run #devfsadm, which puts the files into /dev/dsk. I... (3 Replies)
Discussion started by: ciscocbee
3 Replies

3. Infrastructure Monitoring

unable to shutdown solaris 10

hi folks, i have a snag, when i attempt shutdown of solaris 10 on a sunfire v240 it seems to pause for ages, and goes no further, im busy learning my way around the system so please be patient. /etc(R)-bash-3.00$ init 6 /etc(R)-bash-3.00$ svc.startd: The system is coming down. Please wait.... (7 Replies)
Discussion started by: alienkidmj12
7 Replies

4. Solaris

Unable to login using ssh,telnet onto my solaris machine with solaris 10 installed

Hi, I am unable to login into my terminal hosting Solaris 10 and get the below error message "Server refused to allocate pty ld.so.1: sh: fatal: libc.so.1: open failed: No such file or directory " Is there anyways i can get into my machine and what kind of changes are required to be... (7 Replies)
Discussion started by: sankasu
7 Replies

5. Solaris

unable to use thumbdrive in Solaris 10

hi friends, i had this problem in a Solaris 10 server when i inserted my thumbdrive, i can't find the device file containing usb. what should i do ? (2 Replies)
Discussion started by: Exposure
2 Replies

6. Solaris

unable to login Solaris 10

I have inherited a solaris 10 server. I went to log into it the other day over the console connection, and after sucessfully entering the password, I was booted back to the login prompt with no errors visible. If I enter an incorect password, the console displays 'incorrect password' and kicks... (8 Replies)
Discussion started by: Sol-nova
8 Replies

7. Solaris

Solaris 11 server as Primary Domain Controller

Hi, All of our servers run Solaris (currently 10, but looking to upgrade to 11). In each of our offices we have a server configured as a Primary Domain Controller via Samba to provide naming services to our Windoze users. I would like to continue with that arrangement, but I would also like... (2 Replies)
Discussion started by: wgkorb
2 Replies

8. Solaris

Unable to add printer in Solaris

HI I am unable to add printer in solaris (architecture is SUN and OS is Solaris 10) as I try to print the file it gives following error Failed to contact service for erp-cljCP2025: not-found Need help Regards (7 Replies)
Discussion started by: smazshah
7 Replies

9. Solaris

Unable to reboot Solaris

Hi, we have a sun sparc solaris 10 machine and recently there was a power failure and one of the server domain was down. So today morning i have powered up the domain and it returned me to ok prompt then i have booted the machine with disk from devalias, the system was up as normal and no error... (0 Replies)
Discussion started by: phanidhar6039
0 Replies

10. Solaris

Unable to get Solaris 11 Zone onto the network

Hello, I followed these instructions to create a Solaris 11 zone: http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-092-s11-zones-intro-524494.html And I am unable to ping anything from the Local Zone except for the IP address of the global zone. My global zone has an IP... (6 Replies)
Discussion started by: unblockable
6 Replies

LEARN ABOUT LINUX

unicode_start

UNICODE_START(1)					      General Commands Manual						  UNICODE_START(1)

NAME

       unicode_start - put keyboard and console in unicode mode

SYNOPSIS

       unicode_start [font [umap]]

DESCRIPTION

       The unicode_start command will put the keyboard and console into Unicode (UTF-8) mode.

       For  the  keyboard  this  means that one can attach 16-bit U+xxxx values to keyboard keys using loadkeys(1), and have these appear as UTF-8
       input to user programs.	Also, that one can type hexadecimal Alt-xxxx using the numeric keypad, and again produce UTF-8.

       For the console this means that the kernel expects UTF-8 output from user programs, and displays the output accordingly.

       The parameter font is a font that is loaded. It should have a built-in Unicode map, or, if it hasn't, such a map can be given explicitly as
       second parameter.  When no font was specified, the current font is kept.

NOTE

       Unicode mode is a parameter with a value per virtual console.  However, usually the font and keymap is common to all consoles.

SEE ALSO

       dumpkeys(1), kbd_mode(1), loadkeys(1), unicode_stop(1), utf-8(7), setfont(8)

								    3 Feb 2001							  UNICODE_START(1)
All times are GMT -4. The time now is 01:44 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy