Unable to see controller C1 on Solaris 8 Post: 302998322

Sponsored Content

Operating Systems Solaris Unable to see controller C1 on Solaris 8 Post 302998322 by phanidhar6039 on Tuesday 30th of May 2017 06:38:33 AM

05-30-2017

Registered User

Apologies for not replying.

Yes i did try breaking the mirror and remake previously but still getting the error.

Code:

bash-2.03# cat /var/adm/messages.0
May 21 09:19:12 xxxx  scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:12 xxxx        Error for Command: write(10)               Error Level: Retryable
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  Requested Block: 45410506                  Error Block: 45410512
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  Vendor: FUJITSU                            Serial Number: 0302V77103_a
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  Sense Key: Hardware Error
May 21 09:19:12 xxxx scsi: [ID 107833 kern.notice]  ASC: 0x3 (<vendor unique code 0x3>), ASCQ: 0x80, FRU: 0x0
May 21 09:19:13 xxxx scsi: [ID 243001 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0 (fcp0):
May 21 09:19:13 xxxx        FCP: WWN 0x500000e010279761 reset successfully
May 21 09:19:13 xxxx scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:13 xxxx        Error for Command: write(10)               Error Level: Retryable
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  Requested Block: 45410506                  Error Block: 45410512
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  Vendor: FUJITSU                            Serial Number: 0302V77103_a
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  Sense Key: Hardware Error
May 21 09:19:13 xxxx scsi: [ID 107833 kern.notice]  ASC: 0x3 (<vendor unique code 0x3>), ASCQ: 0x80, FRU: 0x0
May 21 09:19:14 xxxx scsi: [ID 243001 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:14 xxxx        SCSI transport failed: reason 'reset': retrying command
May 21 09:19:15 xxxx scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010279761,0 (ssd15):
May 21 09:19:15 xxxx        Error for Command: write(10)               Error Level: Retryable
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  Requested Block: 45410506                  Error Block: 45410512
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  Vendor: FUJITSU                            Serial Number: 0302V77103_a
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  Sense Key: Hardware Error
May 21 09:19:15 xxxx scsi: [ID 107833 kern.notice]  ASC: 0x3 (<vendor unique code 0x3>), ASCQ: 0x80, FRU: 0x0
May 21 09:19:16 xxxx md_stripe: [ID 641072 kern.warning] WARNING: md: d13: write error on /dev/dsk/c1t0d0s4
May 21 09:19:17 xxxx md_mirror: [ID 104909 kern.warning] WARNING: md: d13: /dev/dsk/c1t0d0s4 needs maintenance
May 27 01:00:07 xxxx explorer: [ID 702911 daemon.notice] Explorer started
May 27 01:04:33 xxxx explorer: [ID 702911 daemon.notice] Explorer finished

if i go with changing the disk then i cant see the controller to make this disk offline.

Running out of ideas for fixing this.

Thanks,
P

phanidhar6039

View Public Profile for phanidhar6039

Find all posts by phanidhar6039

10 More Discussions You Might Find Interesting

1. Solaris

Unable to uninstall package in Solaris

I am getting the below mentioned error while trying to unistall a package from a 2.8 Solaris box. Please help.. pkgrm: ERROR: unable to determine current run-state Removal of <PDMgr> failed (internal error). No changes were made to the system.

2. Filesystems, Disks and Memory

HD Controller does not Work in Solaris

Hi, I'm attempting to build a raid Z NAS using solaris, but I only have 4 sata ports on my MB, so I bought a Rosewill RC-211 PCIe controller (adds 2 sata II ports). I'm new to solaris, but I understand that to add a new drive, you first run #devfsadm, which puts the files into /dev/dsk. I...

3. Infrastructure Monitoring

unable to shutdown solaris 10

hi folks, i have a snag, when i attempt shutdown of solaris 10 on a sunfire v240 it seems to pause for ages, and goes no further, im busy learning my way around the system so please be patient. /etc(R)-bash-3.00$ init 6 /etc(R)-bash-3.00$ svc.startd: The system is coming down. Please wait....

4. Solaris

Unable to login using ssh,telnet onto my solaris machine with solaris 10 installed

Hi, I am unable to login into my terminal hosting Solaris 10 and get the below error message "Server refused to allocate pty ld.so.1: sh: fatal: libc.so.1: open failed: No such file or directory " Is there anyways i can get into my machine and what kind of changes are required to be...

5. Solaris

unable to use thumbdrive in Solaris 10

hi friends, i had this problem in a Solaris 10 server when i inserted my thumbdrive, i can't find the device file containing usb. what should i do ?

6. Solaris

unable to login Solaris 10

I have inherited a solaris 10 server. I went to log into it the other day over the console connection, and after sucessfully entering the password, I was booted back to the login prompt with no errors visible. If I enter an incorect password, the console displays 'incorrect password' and kicks...

7. Solaris

Solaris 11 server as Primary Domain Controller

Hi, All of our servers run Solaris (currently 10, but looking to upgrade to 11). In each of our offices we have a server configured as a Primary Domain Controller via Samba to provide naming services to our Windoze users. I would like to continue with that arrangement, but I would also like...

8. Solaris

Unable to add printer in Solaris

HI I am unable to add printer in solaris (architecture is SUN and OS is Solaris 10) as I try to print the file it gives following error Failed to contact service for erp-cljCP2025: not-found Need help Regards

9. Solaris

Unable to reboot Solaris

Hi, we have a sun sparc solaris 10 machine and recently there was a power failure and one of the server domain was down. So today morning i have powered up the domain and it returned me to ok prompt then i have booted the machine with disk from devalias, the system was up as normal and no error...

10. Solaris

Unable to get Solaris 11 Zone onto the network

Hello, I followed these instructions to create a Solaris 11 zone: http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-092-s11-zones-intro-524494.html And I am unable to ping anything from the Local Zone except for the IP address of the global zone. My global zone has an IP...

LEARN ABOUT DEBIAN

install-solaris

install-solaris(1M)													       install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris	invokes  the  Solaris  Install	program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

	   Minimum physical memory for all installation types

       128 MB

	   Minimum physical memory required for windowing system

       384 MB

	   Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

	   Minimum physical memory for all installation types

       256 MB

	   Minimum physical memory required for windowing system

       512 MB

	   Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris	exists	only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom  (Solaris instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

								    23 Sep 2005 					       install-solaris(1M)

10 More Discussions You Might Find Interesting

1. Solaris

Unable to uninstall package in Solaris

Discussion started by: chrisanto_2000

2. Filesystems, Disks and Memory

HD Controller does not Work in Solaris

Discussion started by: ciscocbee

3. Infrastructure Monitoring

unable to shutdown solaris 10

Discussion started by: alienkidmj12

4. Solaris

Unable to login using ssh,telnet onto my solaris machine with solaris 10 installed

Discussion started by: sankasu