I have an IBM Server (Type - 9111-285 very old one) with one Hard disk (73 GB 10 K) with AIX 5.x, and I need to clone the existing disk to another with the same specifications.
If your server has onlyy one disk it must have only one VG - "rootvg". You should see both disks as (perhaps) "hdisk0" and "hdisk1" when you enter:
If you don't see the second disk: run cfgmgr and if you still don't see it you have some hardware problem you need to fix because the system doesn't know about your disk.
Once you see the second disk you run:
to add the second disk to the rootvg and then run
which will create a mirror image of the first disk to the second. Update the boot image of the second disk by:
and include the second disk into the bootlist of the hardware with:
I hope this helps.
bakunin
These 2 Users Gave Thanks to bakunin For This Post:
Hi,
Other than df -k, is there any command that will tell me all physical hard drives installed on the system as well as the size of each one?
I'm using AIX 5.1
Thanks, (3 Replies)
Hi Engg. ! :mad:
I have a harddisk on which SCO UNIX Open Server was installed. There was some data (in .dbf format) on it. Present condition of HDD is that it is not booting. Now I want to mount this HDD through other HDD on which SCO UNIX Open Server is installed by attaching... (0 Replies)
A sparc server has a new SCSI hard disk added and labeled by the engineer, but they need to be formatted identically to an existing disk (c4t0d0). You decide to script the process and run from the command line without interaction.
I know that the following command line must be achieve this.
#... (3 Replies)
Hi.
We tried cloning a SCO Unix hard disk using Norton Ghost.
However, the new cloned hard disk encounter booting problem.
What possibly go wrong? (1 Reply)
Continuing saga of working on making a retail store more robust by creating a backup clone of the main server, a 1995 era :eek: PC running SCO OpenServer 5.0.0b and a discontinued Point of Sales (POS) software system.
I have a PC of the same make and model. The CPU runs faster and it has a... (5 Replies)
in red hat 4, 5 any one know any commands or any scritps to monitor HP DL 380 G5/6 server and trigger alarm when hard disk failed.
thanks for all support
---------- Post updated at 02:45 PM ---------- Previous update was at 12:00 PM ----------
does HP ProLiant Support Pack support is... (4 Replies)
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
hello folks,
I have a 300GB ROOTVG volume groups with one filesystem /backup having 200GB allocated space
Now, I cannot alt disk clone or mirrorvg this hdisk with another smaller disk. The disk size has to be 300GB; I tried alt disk clone and mirrorvg , it doesn't work. you cannot copy LVs as... (9 Replies)
Hi all,
I have encountered the issue with the hard disk, the disk is failed and need to replace by the new one.
As my understanding, this is just to take out the failed disk and insert the new ones, and that's all.
But the third party hardware vendor said, there should be another procedure... (9 Replies)