Keyboard User Input in awk language ? Post: 302997631

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

suppressing keyboard input

Setup Info: This User Id and Password mention below are being used with the ISQL command to connect to a sybase database so they are likely to not be the same as those that were signed on from the session. Situation: Using a korn shell, the shell prompts for a User Id and Password. During the...

2. Shell Programming and Scripting

awk user input

Using the following I'm trying to print the user's response to the prompt Y / N but I get nothing other than the contents of $1? awk '{ printf($1 " ? (Y/N)") getline myresponse < "-" system("read myresponse") if (myresponse == "Y") { print $1...

3. Shell Programming and Scripting

AWK set FILENAME via user input

I am trying to write a awk script that prompts user for input to set the FILENAME varable. I can get it set, but I think awk is not doing anything with it. this is what I have so far #!/usr/bin/nawk -f BEGIN { FILENAME = "" printf "Enter name of file to check in : " ...

4. Programming

Keyboard Input

Does anyone know how do you determine the user idle time of STDIN in order to log the user out for being idle too long. I would like to write a c program to do this but I it is not clear upon how to determine idle time from keyboard input. I have found that the "who.c" source file uses the last...

5. UNIX for Dummies Questions & Answers

Testing for correct user input from keyboard

What script can I use to catch errors in a shell script if user inputs alpha numeric characters instead on integers from the keyboard?

6. Shell Programming and Scripting

How to take input from user or awk script?

Hi Jim, I have following script,i which i need to take dynamic value . script, nawk -v v1=grep"INT_EUR" $propertifilename | cut -d"=" -F2` -F'~' '{if (NF-1 !=v1) {print "Error in " $0 " at line number "NR" tilde count " N-1}}' $filename In the above script i want to use INT_EUR as a variable...

7. Shell Programming and Scripting

Awk replacing file with user input

this section of the awk code i have here takes file to work with from the user. the user specifies the file name from the command line and the file name is assigned to the variable $FLIST awk 'BEGIN { while((getline < "'${FLIST}'")>0) S FS="\n"; RS="}\n" } now, i dont want...

8. Homework & Coursework Questions

How to read user keyboard input inside the case?

I need to Write a shell script that allows some system-administration tasks to be preformed automatically from a menu-driven interface. with automated following tasks: Copy directory tree Delete files or directories Output Information (this part is done ) *Copy directory tree The �Copy...

9. Shell Programming and Scripting

User input and run awk using the input

I am trying to allow a user to enter in text and then store that text in a variable $gene to run in an awk command in which those values are used to run some calculations. I am getting syntax errors however, when I try. Thank you :). The awk runs great if it is a pre-defined file that is used,...

10. Shell Programming and Scripting

Read input from Keyboard, do not proceed if no input

Hi, I am working on a script, which requests users to enter input. Ex: read -p "Please enter your email id:" email I don't want users skipping this entry, this has to be mandatory.I dont want to proceed without input. I can do a check if variable $email is empty and proceed if not.But, i...

LEARN ABOUT REDHAT

gimptool

GIMPTOOL(1)							 GIMP Manual Pages						       GIMPTOOL(1)

NAME

       gimptool - perform various Gimpy functions

SYNOPSIS

       gimptool  [--prefix[=DIR]]  [--exec-prefix[=DIR]]  [--version]  [--help]  [--quiet]  [--silent]	[-n]  [--just-print] [--dry-run] [--recon]
       [--bindir] [--sbindir] [--libexecdir] [--datadir] [--sysconfdir] [--sharedstatedir]  [--localstatedir]  [--libdir]  [--infodir]	[--mandir]
       [--includedir]  [--gimpplugindir]  [--gimpdatadir]  [--libs]  [--libs-noui]  [--cflags]	[--cflags-noi]	[--build plug-in.c] [--build-strip
       plug-in.c] [--install plug-in.c] [--install-strip plug-in.c] [--install-admin  plug-in.c]  [--install-bin  plug-in]  [--install-admin-strip
       plug-in.c]  [--install-bin-strip  plug-in]  [--install-admin-bin plug-in] [--install-script script.scm] [--install-admin-script script.scm]
       [--uninstall-bin plug-in] [--uninstall-admin-bin plug-in] [--uninstall-script script.scm] [--uninstall-admin-script script.scm]

DESCRIPTION

       gimptool is a tool that can, among other things, build plug-ins or scripts and install them if they are distributed in one source file.

       gimptool can also be used by programs that need to know what libraries and include-paths Gimp was compiled with. This is especially  useful
       in Makefiles.

       On  Unix,  gimptool  is	a script. On Windows, it is a program. They should be more or less compatible. This manual page describes the Unix
       script version.

OPTIONS

       gimptool accepts the following options:

       --version
	       Print the currently installed version of Gimp on the standard output.

       --help  Print out the help blurb, showing commonly used commandline options.

       --quiet Run quietly without echoing any of the build commands.

       --silent
	       Run silently without echoing any of the build commands. Same as --quiet.

       -n      Test mode. Print the commands but dont actually execute them. Useful for making dry runs for testing.

       --just-print
	       Test mode. Print the commands but dont actually execute them. Same as -n.

       --dry-run
	       Test mode. Print the commands but dont actually execute them. Same as -n.

       --recon Test mode. Print the commands but dont actually execute them. Same as -n.

       --bindir
	       Outputs the bindir used to install the Gimp.

       --sbindir
	       Outputs the sbindir used to install the Gimp.

       --libexecdir
	       Outputs the libexecdir used to install the Gimp.

       --datadir
	       Outputs the datadir used to install the Gimp.

       --sysconfdir
	       Outputs the sysconfdir used to install the Gimp.

       --sharedstatedir
	       Outputs the sharedstatedir used to install the Gimp.

       --localstatedir
	       Outputs the localstatedir used to install the Gimp.

       --libdir
	       Outputs the libdir used to install the Gimp.

       --infodir
	       Outputs the infodir used to install the Gimp.

       --mandir
	       Outputs the mandir used to install the Gimp.

       --includedir
	       Outputs the includedir used to install the Gimp.

       --gimpdatadir
	       Outputs the actual directory where the Gimp data files were installed.

       --gimpplugindir
	       Outputs the actual directory where the Gimp plugins were installed.

       --build plug-in.c
	       Compile and link plug-in.c into a Gimp plug-in.

       --build-strip plug-in.c
	       Compile,link, and strip plug-in.c into a Gimp plug-in.

       --install plug-in.c
	       Compile, link, and install plug-in.c into the user's personal Gimp plug-in directory ($HOME/.gimp-1.2/plug-ins)

       --install-strip plug-in.c
	       Compile, link,strip,  and install plug-in.c into the user's personal Gimp plug-in directory ($HOME/.gimp-1.2/plug-ins)

       --install-admin plug-in.c
	       Compile, link, and install plug-in.c into the system-wide Gimp plug-in directory (/usr/lib/gimp/1.2/plug-ins)

       --install-bin plug-in
	       Install plug-in into the user's personal Gimp plug-in directory ($HOME/.gimp-1.2/plug-ins)

       --install-admin-bin plug-in
	       Install plug-in into the system-wide Gimp plug-in directory (/usr/lib/gimp/1.2/plug-ins)

       --install-bin-strip plug-in
	       Install stripped plug-in into the user's personal Gimp plug-in directory ($HOME/.gimp-1.2/plug-ins)

       --install-admin-bin-strip plug-in
	       Install stripped plug-in into the system-wide Gimp plug-in directory (/usr/lib/gimp/1.2/plug-ins)

       --install-script script.scm
	       Install script.scm into the user's personal Gimp script directory ($HOME/.gimp-1.2/scripts)

       --install-admin-script script.scm
	       Install script.scm into the system-wide Gimp script directory (/usr/share/gimp/1.2/scripts)

       --uninstall-bin plug-in
	       Uninstall plug-in from the user's personal Gimp plug-in directory ($HOME/.gimp-1.2/plug-ins)

       --uninstall-admin-bin plug-in
	       Uninstall plug-in from the system-wide Gimp plug-in directory (/usr/lib/gimp/1.2/plug-ins)

       --uninstall-script script.scm
	       Uninstall script.scm from the user's personal Gimp script directory ($HOME/.gimp-1.2/scripts)

       --uninstall-admin-script script.scm
	       Uninstall script.scm from the system-wide Gimp script directory (/usr/share/gimp/1.2/scripts)

       --libs  Print the linker flags that are necessary to link a Gimp plug-in.

       --libs-noui
	       Print the linker flags that are necessary to link a Gimp plug-in, for plugins that do not require the GTK libs.

       --cflags
	       Print the compiler flags that are necessary to compile a Gimp plug-in.

       --clags-noui
	       Print the compiler flags that are necessary to compile a Gimp plug-in for plugins that do not require the GTK libs.

       --prefix=PREFIX
	       If specified, use PREFIX instead of the installation prefix that Gimp was built with when computing the output for the --cflags and
	       --libs  options.  This  option  is  also used for the exec prefix if --exec-prefix was not specified. This option must be specified
	       before any --libs or --cflags options.

       --exec-prefix=PREFIX
	       If specified, use PREFIX instead of the installation exec prefix that Gimp was  built  with  when  computing  the  output  for  the
	       --cflags and --libs options. This option must be specified before any --libs or --cflags options.

ENVIRONMENT

       GTK_CONFIG
	       to get the location of the gtk-config program.

       CC      to get the name of the desired C compiler.

       CFLAGS  to get the preferred flags to pass to the C compiler for plug-in building.

       DESTDIR to add a prefix to the install/uninstall path.

       LDFLAGS to get the prefered flags for passing to the linker.

       LIBS    for passing extra libs that may be needed in the build process. For example, LIBS=-lintl .

       GTK_CONFIG
	       path to the gtk-config shell script used by gimptool and in the build process of many gtk apps.

SEE ALSO

       gimp(1), gimprc(5), gimp-remote(1), gtk-config(1)

AUTHORS

       gimptool was written by Manish Singh (yosh@gimp.org) and based on gtk-config by Owen Taylor (owen@gtk.org).

       This  man page was written by Ben Gertzfield (che@debian.org), and tweaked by Manish Singh (yosh@gimp.org), Adrian Likins (adrian@gimp.org)
       and Marc Lehmann (pcg@goof.com>).

COPYRIGHT

       Copyright (C)  1998 Owen Taylor and Manish Singh

       Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, pro-
       vided  that  the  above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in sup-
       porting documentation.

Version 1.2.3							   26 June 2001 						       GIMPTOOL(1)

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

suppressing keyboard input

Discussion started by: anthreedhr

2. Shell Programming and Scripting

awk user input

Discussion started by: gefa

3. Shell Programming and Scripting

AWK set FILENAME via user input

Discussion started by: timj123

4. Programming

Keyboard Input

Discussion started by: cpaquette