I did a netstat -an and saw that ntp was listening on 4 UDP ports for each interface. Is this insecure because they are UDP ports and I don't see them in a listen state, is that because they are just a client.
Thank you.
*.ntp Idle... (2 Replies)
Greetings!
I just managed to install Solaris 10 on a Sparc based machine. However, there might be a problem with the way ssh is configured.
I CAN ssh from the machine into another on the network (same subnet, as root), but then the newly installed machine CANNOT seem to accept incoming ssh... (2 Replies)
Hi!
I have two solaris 10 machines(say 10.1.1.1,10.1.1.2). i have installed rsync on 10.1.1.2,
10.1.1.1:::
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
-bash-3.00$ ssh 10.1.1.2 "echo $PATH"
Password:... (4 Replies)
Hi,
I am unable to login into my terminal hosting Solaris 10 and get the below error message
"Server refused to allocate pty
ld.so.1: sh: fatal: libc.so.1: open failed: No such file or directory "
Is there anyways i can get into my machine and what kind of changes are required to be... (7 Replies)
Got a strange problem.
I have 4 Solaris servers all configured the same, Solaris 10 x86 update 10.
When I try to ssh from one Solaris 10 server to another server ssh hangs.
I have an identical server and when I try this everything works fine.
The weird thing is if I am root on the server... (1 Reply)
I want to SSH to 192.168.1.15 Server from my machine, my ip was 192.168.1.99
Source Destination was UP, with IP 192.168.1.15.
This is LAN Network there are 30 Machine's Connected to the network and working fine, I'm Playing around the local machine's because I need to apply the same rules in... (2 Replies)
Dear Concern,
I want to block all ports of a particular node (ip: 172.16.10.141) through iptables. My nodes ip addresses are as below:172.16.10.137
172.16.10.138
Please advise us. (0 Replies)
Hello Everyone,
Quick question, any short and fast way to locate and map the physical Ethernet ports on the physical server ?
Server with expansion box has around 12 ethernet ports (fibre and ethernet)
what is the quickest way to map or find out en0 represents which physical port ?
... (1 Reply)
Hi folks,
I am fairly a beginner when it comes to Solaris OS administration, but part of my job somehow has scope to provide L1-level of OS administration over a few solaris servers.
Now, we have a requirement to limit the number of simultaneous ssh logins/sessions to the server, sort of... (0 Replies)
Discussion started by: engrcha
0 Replies
LEARN ABOUT OPENSOLARIS
xge
xge(7D) Devices xge(7D)NAME
xge - Neterion Xframe 10Gigabit Ethernet Network Adapter driver
SYNOPSIS
/dev/xge
DESCRIPTION
The xge 10 Gigabit Ethernet driver is a multi-threaded, loadable, clonable, GLD-based STREAMS driver supporting the Data Link Provider
Interface, dlpi(7P), on S2IO Xframe 10-Gigabit Ethernet Network Adapter.
The xge driver functions includes controller initialization, frame transmit and receive, promiscuous and multicast support, TCP and UDP
checksum offload (IPv4 and IPv6), 9622-byte jumbo frame, and error recovery and reporting.
The xge driver and hardware support the 10GBase-SR/W, LR/W, and ER/W 802.3 physical layer.
APPLICATION PROGRAMMING INTERFACE
The cloning, character-special device /dev/xge is used to access all Xframe devices installed within the system.
The xge driver is managed by the dladm(1M) command line utility, which allows VLANs to be defined on top of xge instances and for xge
instances to be aggregated. See dladm(1M) for more details.
The values returned by the driver in the DL_INFO_ACK primitive in response to the DL_INFO_REQ are as follows:
o Maximum SDU is 9600.
o Minimum SDU is 0.
o DSLAP address length is 8 bytes.
o MAC type is DL_ETHER.
o SAP length value is -2 meaning the physical address component is followed immediately by a 2-byte sap component within the
DLSAP address.
o Broadcast address value is Ethernet/IEEE broadcast address (FF:FF:FF:FF:FF:FF).
CONFIGURATION
By default, the xge driver works without any configuration file.
You can check the running-time status of a device instance using ndd(1M). Currently, the driver provides an interface to print all hard-
ware statistics.
For example, to print statistics of device xge0:
#ndd /dev/xge0 stats
tmac_data_octets 772
tmac_frms 15
tmac_drop_frms 0
tmac_bcst_frms 6
tmac_mcst_frms 6
...
rmac_vld_frms 13
rmac_fcs_err_frms 0
rmac_drop_frms 0
rmac_vld_bcst_frms 7
rmac_vld_mcst_frms 11
rmac_out_rng_len_err_frms 0
rmac_in_rng_len_err_frms 0
rmac_long_frms 0
...
not_traffic_intr_cnt 242673
traffic_intr_cnt 28
...
FILES
/dev/xge xge special character device
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------------------------------------+
|ATTRIBUTE TYPE ATTRIBUTE VALUE |
|Architecture x86 |
+-----------------------------------------------------------+
SEE ALSO dladm(1M), ndd(1M), attributes(5), streamio(7I), dlpi(7P)
Writing Device Drivers
STREAMS Programming Guide
Network Interfaces Programmer's Guide
SunOS 5.11 3 Oct 2005 xge(7D)