Not an upload but this is a taster for what is to come.
The spectrum analyser is completed and nothing like the primitive free version previously uploaded here.
The images start with a voice capture using SOX and displayed at 5mS/Division, Note the red CAPTURE mode inside the top little window. In the COMMAND window the command SPECAN is ready to be entered.
Once entered the next image prompts for an External source for measurement input, for example the external microphone. 'N' will be entered and a 48000 byte main capture raw file is converted to an 8000 byte version for the limited 4KHz resolution of this code. I will try and extend to at least 24KHz resolution at a later date.
After a few seconds the spectrum displays this low resolution capture. This will automatically switch from main red CAPTURE mode to green STORAGE mode for the last image to write protect the current main capture. This display awaits an ENTER to return to the STORAGE screen of the original capture.
This User Gave Thanks to wisecracker For This Post:
We have a system running ssh. When a user logs in, they do not get the project they are assigned to (they run under "system"). I verify the project using the command "ps -e -o user,pid,ppid,args,project". If you do a "su - username", the user does get the project they are assigned to (and all... (2 Replies)
A new project was posted on your project board.
Project title: Bash Shell Tutoring
Estimated Budget:
$50/hr
Start date:
Immediately
Required skills:
Linux, Bash, Shell, UNIX
I work as a datawarehouse designer and developer.
Although I usually stick to the role of an analyst,... (0 Replies)
Hi Admin and Staff...
Thanks for hosting AudioScope.sh on this site. I have had the biggest surprise of my life today.
This months issue of the UK Linux magazine "Linux Format" have done a small piece on the project.
Issue April 2014, LXF 182, page 65...
This I never expected and I... (1 Reply)
Hi all...
Has _below_ ever been done in UNIX shell scripting before?
(I have done this easily in Python but this is using purely the shell.)
The DEMO version IS built and has been tested.
Pre-amble...
I now need at least one control pulse for the AudioScope.sh when in PURELY audio I/O mode,... (2 Replies)
Development machine:- Standard MBP 13 inch, OSX 10.7.5...
GNU bash, version 3.2.48(1)-release (x86_64-apple-darwin11)
Copyright (C) 2007 Free Software Foundation, Inc.
Scenario:- Audio capture for AudioScope.sh for CygWin without ANY third party installs.
I am trying my hardest to get a... (6 Replies)
Hi guys...
Well I have entered an area of partial insnity... ;o)
Below is a photo of the 'ALTDC' board for AudioScope.sh...
I have decided to incorporate all three methods for obtaining DC into this MBP via the MIC input.
1) VFO.
2) CHOPPER.
3) COUNTER.
The controller for the COUNTER... (9 Replies)
Boy oh boy, with only a MONO mic input to use AudioScope gets much more difficult when the ALTDC board is included.
It needs, so far, two hits at the MIC input with a single hit at the HEADPHONE audio output.
The first at the highest practical resolution for the AC component and the second... (0 Replies)
Hi all...
Apologies for any typos...
For those intersted in the AudioScope the next construction is finished.
I have not been totally idle but working out the hard stuff to be able to be very simple to build.
It is a single transistor simple timer that lasts for about 1.2 to 1.8 seconds.... (2 Replies)
Using AudioScope.sh on Ubuntu 17.04 from a live DVD disc I came across an error.
Consider the code below it is a MUCH shortened version of the KEYBOARD input in AudioScope.
#!/bin/bash
bash --version
uname -a
status=0
KEYBOARD()
{
read -r -p "Enter QUIT or EXIT to quit:- " kbinput
if ||... (11 Replies)
Discussion started by: wisecracker
11 Replies
LEARN ABOUT FREEBSD
mac_test
MAC_TEST(4) BSD Kernel Interfaces Manual MAC_TEST(4)NAME
mac_test -- MAC framework testing policy
SYNOPSIS
To compile the testing policy into your kernel, place the following lines in your kernel configuration file:
options MAC
options MAC_TEST
Alternately, to load the testing module at boot time, place the following line in your kernel configuration file:
options MAC
and in loader.conf(5):
mac_test_load="YES"
DESCRIPTION
The mac_test policy module implements a testing facility for the MAC framework. Among other things, mac_test will try to catch corrupt
labels the system is attempting to destroy and drop to the debugger. Additionally, a set of statistics regarding the number of times various
MAC framework entry points have been called is stored in the security.mac.test sysctl(8) tree.
Label Format
No labels are defined for mac_test.
SEE ALSO mac(4), mac_biba(4), mac_bsdextended(4), mac_ifoff(4), mac_lomac(4), mac_mls(4), mac_none(4), mac_partition(4), mac_portacl(4),
mac_seeotheruids(4), mac(9)HISTORY
The mac_test policy module first appeared in FreeBSD 5.0 and was developed by the TrustedBSD Project.
AUTHORS
This software was contributed to the FreeBSD Project by Network Associates Labs, the Security Research Division of Network Associates Inc.
under DARPA/SPAWAR contract N66001-01-C-8035 (``CBOSS''), as part of the DARPA CHATS research program.
BUGS
See mac(9) concerning appropriateness for production use. The TrustedBSD MAC Framework is considered experimental in FreeBSD.
While the MAC Framework design is intended to support the containment of the root user, not all attack channels are currently protected by
entry point checks. As such, MAC Framework policies should not be relied on, in isolation, to protect against a malicious privileged user.
BSD December 1, 2002 BSD