Both igb0 and igb4 have same mac address, is this intentional ?
I suspect that all the interfaces have system wide mac, check the output of :
In that case you will need to switch that value, and reboot the host to have unique macs for all interfaces.
After that you can use them for grouping.
hi,
i tried to configure an VLAN interface on my SF280 based on the documentation on docs.sun.com
# ifconfig eri1000 plumb up
Oct 21 13:41:26 cmsmaster ip: ip_rput_dlpi(eri1000): DL_ERROR_ACK for DL_ATTACH_REQ(11), errno 8, unix 0
ifconfig: SIOCSLIFNAME for ip: eri1000: no such interface... (2 Replies)
Probe-based IPMP active - active
Probe-based IPMP active - passive
Link-based only active -standby
????
What are differences between
Probe-based IPMP active - passive anddd
Link-based only active -standby
???!!!
For example in active active probe-based IPMP there are
lets... (6 Replies)
Hi all,
so server: FreeBSD 7.0 release,
interfaces on it DLINK DGE-528T with support of vlans :))
so first interface looks to LAN second to ISP.
I created vlan1 with id 1 and gave to it ip address and plug it in
tagged port of swith for vlan 1. so client from vlan1 reaches the server.
it... (2 Replies)
Hi all
My application is a monitoring application that monitors the incoming udp packet when ever required. When ever a particular source ip and port and dest ip and port is provided the filter will be framed based them. For eg,
char filterExpr;
filterExpr = "udp and src host 192.168.16.100... (0 Replies)
Hello. I want to Communicate 2 VLAN with router like this solution:
http://8pic.ir/images/83m0ouih8mmm9s1sfl56.jpg
For this purpose I'm configuring 2 Linux system as a switch and connect 4 host to them. Then a router is added to scenario.
The configuration of the switches is:
On DUT1(Linux):... (1 Reply)
Hi,
Is it possible to VLAN tag with a ce interface on Solaris 9? Link speed is gb.
ce:0:ce0:link_speed 1000
I have a ce0 interface I would need to have access to another VLAN as well as the one it's currently on.
What commands would I need to run?
Thanks.;) (2 Replies)
We have two hosts in same vlan with same route rules.
One of them is not able to connect to an outside IP while in another I get "failed: Connection timed out" while testing the connectivity through netcat.
I have tried mtr /traceroute and it gives me the same results.
Is there a netcat... (1 Reply)
Have 2 nics on physical system
net0 phys 1500 up --
net1 phys 1500 up --
1. I want to create a link aggregation with LACP enabled with above 2 nics
2. Create port-group(Like we create on ESXi) with VLAN-ID 2141
3. And assign this... (0 Replies)
Hi Guys,
Our lpars is currently running on 2 different vlans (20, 30). Now we have a requirement that vlan 30 needs to be change to vlan 31 at the same subnet. I'm not sure on what is the best approach for this or what change is involve on the AIX side.
This is our setup.
Network switch -... (5 Replies)
Discussion started by: kaelu26
5 Replies
LEARN ABOUT SUNOS
vni
vni(7d) Devices vni(7d)NAME
vni - STREAMS virtual network interface driver
DESCRIPTION
The vni pseudo device is a multi-threaded, loadable, clonable, STREAMS pseudo-device supporting the connectionless Data Link Provider
Interface dlpi(7P) Style 2. Note that DLPI is intended to interact with IP, meaning that DLPI access to applications is not supported. (For
example, snoop fails on the vni interface.)
The vni device is a software-only interface and does not send or receive data. The device provides a DLPI upper interface that identifies
itself to IP with a private media type. It can be configured via ifconfig(1M) and can have IP addresses assigned to it, making aliases pos-
sible.
The vni pseudo device is particularly useful in hosting an IP address when used in conjunction with the 'usesrc' ifconfig option (see
ifconfig(1M) for examples). The logical instances of the device can also be used to host addresses as an alternative to hosting them over
the loopback interface.
Multicast is not supported on this device. More specifically, the following options return an error when used with an address specified on
vni: IP_MULTICAST_IF, IP_ADD_MEMBERSHIP, IP_DROP_MEMBERSHIP, IPV6_MULTICAST_IF, IPV6_JOIN_GROUP, IPV6_LEAVE_GROUP. In addition, broadcast
is not supported.
Because there is no physical hardware configured below it, no traffic can be received through nor transmitted on a virtual interface. All
packet transmission and reception is accomplished with existing physical interfaces and tunnels. Because applications that deal with packet
transmission and reception (such as packet filters) cannot filter traffic on virtual interfaces, you cannot set up a packet filter on a
virtual interface. Instead, you should configure the policy rules to apply to the physical interfaces and tunnels, and if necessary, use
the virtual IP addresses themselves as part of the rule configuration. Also, note that the virtual interface cannot be part of an IP multi-
pathing (IPMP) group.
FILES
/dev/vni
64-bit ELF kernel driver
SEE ALSO ifconfig(1M), in.mpathd(1M), ip(7P), ip6(7P)SunOS 5.10 18 July 2004 vni(7d)