Linux router help needed Post: 302996437

Sponsored Content

Top Forums UNIX for Beginners Questions & Answers Linux router help needed Post 302996437 by ygemici on Wednesday 26th of April 2017 08:15:24 AM

04-26-2017

Registered User

Quote:

Originally Posted by apoklyps3

I'm not sure I'm going to be able to accomplish anything here.
I have made the modifications, but unfortunately the router is branded by the internet provider and there is no official support or any way to download the firmware.
the provider pushes new firmware and can't think of any way I could intercept it
i guess what I was dumping the squashfs only using cat /dev/mtd5 > /var/tmp/usb/sda1/backup1.bin command.

Hi apoklyps3 ,
Sorry for late response beceause of im very busy with some jobs and a lot of works Smilie

I could see for a few hours at the images..
It takes a lot of time to study it in depth but i see some files in the images so it look MIPS arch executable ( kernel code ) and
other kernel data ( but i m not sure consistency of this data , i could not test it due to limited time ) and the other one contains two boot data ( i guess binary bootloader and configs )..
as I understand it we must the update the rootfs that contains ( /etc/ and others dirs ) ..
so i will continue to examine ( when i have time )

now if you have the firmware image ( one-piece ) , can you attach here it ?
and can you attach the other mtd ( ( 2-3-4-5-6) especially rootfses ) parts ( thanks )

ygemici

View Public Profile for ygemici

Find all posts by ygemici

3 More Discussions You Might Find Interesting

1. IP Networking

Linux Router?

I am trying to set up a linux box as a router, but I am a little confused on how to do this. I am using Red Hat 9.0 on a machine that has 2 nic cards. Also, I am using a DSL pppoe connection. I have installed rp-pppoe and I am connected to the internet via the pseudo pppoe interface. I have...

2. Cybersecurity

Help needed in IPTables firewall/router setup - Linux

HI all, I have setup IPTables firewall/Router and my home network, with address space 192.168.10.XXX Form my private network hosts, i can ping the gateway ( 192.168.10.101 ) , but the reverse is not happening. Can someone help me as of what i need to do, so that i can ping my private...

3. Shell Programming and Scripting

Expect script help needed- script failing if router unavailable

Hey all. Sometimes I'm tasked to change some router configs for the entire network (over 3,000 Cisco routers). Most of the time its a global config parameter so its done with a loop and an IP list as its the same configuration change for all routers. This is working OK. However, sometimes an...

LEARN ABOUT FREEBSD

ipwfw

IPWFW(4)						   BSD Kernel Interfaces Manual 						  IPWFW(4)

NAME

     ipwfw -- Firmware Module for Intel PRO/Wireless 2100 driver

SYNOPSIS

     To compile this module into the kernel, place the following line in your kernel configuration file:

	   device ipwfw

     This will include three firmware images inside the kernel.  If you want to pick only the firmware image for the mode you want to operate your
     network adapter in choose one of the following:

	   device ipwbssfw
	   device ipwibssfw
	   device ipwmonitorfw

     Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf(5):

	   ipw_bss_load="YES"
	   ipw_ibss_load="YES"
	   ipw_monitor_load="YES"

DESCRIPTION

     This module provides access to firmware sets for the Intel PRO/Wireless 2100 series of IEEE 802.11 adapters.  It may be statically linked
     into the kernel, or loaded as a module.

     For the loaded firmware to be enabled for use the license at /usr/share/doc/legal/intel_ipw/LICENSE must be agreed to by adding the following
     line to loader.conf(5):

	   legal.intel_ipw.license_ack=1

FILES

     /usr/share/doc/legal/intel_ipw/LICENSE  ipwfw firmware license

SEE ALSO

     ipw(4), firmware(9)

BSD
								 January 14, 2010							       BSD