Linux router help needed Post: 302996396

3 More Discussions You Might Find Interesting

1. IP Networking

Linux Router?

I am trying to set up a linux box as a router, but I am a little confused on how to do this. I am using Red Hat 9.0 on a machine that has 2 nic cards. Also, I am using a DSL pppoe connection. I have installed rp-pppoe and I am connected to the internet via the pseudo pppoe interface. I have...

2. Cybersecurity

Help needed in IPTables firewall/router setup - Linux

HI all, I have setup IPTables firewall/Router and my home network, with address space 192.168.10.XXX Form my private network hosts, i can ping the gateway ( 192.168.10.101 ) , but the reverse is not happening. Can someone help me as of what i need to do, so that i can ping my private...

3. Shell Programming and Scripting

Expect script help needed- script failing if router unavailable

Hey all. Sometimes I'm tasked to change some router configs for the entire network (over 3,000 Cisco routers). Most of the time its a global config parameter so its done with a loop and an IP list as its the same configuration change for all routers. This is working OK. However, sometimes an...

LEARN ABOUT HPUX

cfgetospeed

cfspeed(3C)															       cfspeed(3C)

NAME

       cfgetospeed(), cfsetospeed(), cfgetispeed(), cfsetispeed() - tty baud rate functions

SYNOPSIS

DESCRIPTION

       These  functions set and get the input and output speed codes in the termios structure referenced by termios_p.	The termios structure con-
       tains these speed codes representing input and output baud rates as well as other terminal related parameters.  Setting the parameters on a
       terminal file does not become effective until is successfully called.

	      returns the output speed code from the
				  termios structure referenced by termios_p.

	      sets the output speed code in the
				  termios  structure  referenced by termios_p to speed.  The speed code for a baud rate of zero, is used to termi-
				  nate the connection.	If is specified, the modem control lines are no longer asserted,  which  normally  discon-
				  nects the line.

	      returns the input speed code from the
				  termios structure referenced by termios_p.

	      sets the input speed code in the
				  termios structure referenced by termios_p to speed.

RETURN VALUE

       returns the output speed code from the termios structure referenced by termios_p.

       returns the input speed code from the termios structure referenced by termios_p.

       and return zero upon successful completion.  Otherwise, they return -1 and set to indicate the error.

ERRORS

       and fail when the following condition is encountered:

	      [EINVAL]	     The value of speed is outside the range of possible speed codes as specified in

WARNINGS

       and can be used to set speed codes in the termios structure that are not supported by the terminal hardware.

SEE ALSO

       tcattribute(3C), thread_safety(5), termio(7).

STANDARDS CONFORMANCE

																       cfspeed(3C)