Linux router help needed Post: 302996145

Sponsored Content

Top Forums UNIX for Beginners Questions & Answers Linux router help needed Post 302996145 by apoklyps3 on Thursday 20th of April 2017 04:45:58 AM

04-20-2017

Registered User

Linux router help needed

hi guys.
I have an Kaon router wich runs "Linux version 3.10.24-svn1480 (jskim@jake-205) (gcc version 4.4.7 (Realtek MSDK-4.4.7 Build 1459".
The problem I have it is that its firmware is in early stages and has alot of things messed up.
Wake on lan doesn't work without arp binding and that can be done only via telnet as it's webinterface doesn't have that option.
Its a workaround that works , unfortunately it only lasts untill I reboot the router.
What I was trying to accomplish is creating a script in /etc/init.d that runs the arp bind command.
That's where my troubles really began. I can't create or edit files in /etc/init.d (or /etc for that matter). The filesystem is Ready-only.

I have tried "mount -o remount, rw /" command and the / is still "ro"

here are my mounts. I managed to create a file inside /apps (though that doesn't help much as, as I need it in /etc/init.d

Code:

# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
ramfs on /var type ramfs (rw,relatime)
/dev/mtdblock5 on /apps type jffs2 (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)

any ideeas?
thanks in advance.

apoklyps3

View Public Profile for apoklyps3

Find all posts by apoklyps3

3 More Discussions You Might Find Interesting

1. IP Networking

Linux Router?

I am trying to set up a linux box as a router, but I am a little confused on how to do this. I am using Red Hat 9.0 on a machine that has 2 nic cards. Also, I am using a DSL pppoe connection. I have installed rp-pppoe and I am connected to the internet via the pseudo pppoe interface. I have...

2. Cybersecurity

Help needed in IPTables firewall/router setup - Linux

HI all, I have setup IPTables firewall/Router and my home network, with address space 192.168.10.XXX Form my private network hosts, i can ping the gateway ( 192.168.10.101 ) , but the reverse is not happening. Can someone help me as of what i need to do, so that i can ping my private...

3. Shell Programming and Scripting

Expect script help needed- script failing if router unavailable

Hey all. Sometimes I'm tasked to change some router configs for the entire network (over 3,000 Cisco routers). Most of the time its a global config parameter so its done with a loop and an IP list as its the same configuration change for all routers. This is working OK. However, sometimes an...

LEARN ABOUT CENTOS

ipwfw

IPWFW(4)						   BSD Kernel Interfaces Manual 						  IPWFW(4)

NAME

     ipwfw -- Firmware Module for Intel PRO/Wireless 2100 driver

SYNOPSIS

     To compile this module into the kernel, place the following line in your kernel configuration file:

	   device ipwfw

     This will include three firmware images inside the kernel.  If you want to pick only the firmware image for the mode you want to operate your
     network adapter in choose one of the following:

	   device ipwbssfw
	   device ipwibssfw
	   device ipwmonitorfw

     Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf(5):

	   ipw_bss_load="YES"
	   ipw_ibss_load="YES"
	   ipw_monitor_load="YES"

DESCRIPTION

     This module provides access to firmware sets for the Intel PRO/Wireless 2100 series of IEEE 802.11 adapters.  It may be statically linked
     into the kernel, or loaded as a module.

     For the loaded firmware to be enabled for use the license at /usr/share/doc/legal/intel_ipw/LICENSE must be agreed to by adding the following
     line to loader.conf(5):

	   legal.intel_ipw.license_ack=1

FILES

     /usr/share/doc/legal/intel_ipw/LICENSE  ipwfw firmware license

SEE ALSO

     ipw(4), firmware(9)

BSD
								 January 14, 2010							       BSD