It would be safer to wrap the entire assignment in double quotes as a common practice so that if you accidentally assign a space to either variable, then the assignment to DIR1 or DIR2 will not fail:-
I always clearly mark the variable name with curly braces { & } to ensure I don't confuse the variable with any literal text or underscores that follow. You can get trapped with things like this:-
This is because the assignment is looking for variable V1_Goodbye (equivalent to ${V1_Goodbye} ) which has not been set.
I would also suggest that you could consolidate commands such that you just do this:-
Of course, it depends what you use the values for elsewhere.
Hello
I am executing the following script
nawk 'NR == 1 || substr($0,63,5) ~ /H... / && \
_++ == 2 { fn && close(fn); fn = "part_" ++c; _ = 1 }
{ print > fn }' sample.dat
When i execute as it is it is executing fine. but when i execute the whole script as a single line like below
... (2 Replies)
I am executing the below in telnet
#!/usr/bin/ksh
File1=simple.txt # The file to check
LogFile=simple.log # The log file
DelayMax=30 # Timeout delay
Tolerance=2
# BEGIN ##############################
while true
do
StampNow=$(date +%s)/60 # stamp in minutes
... (3 Replies)
Hi ,
I m getting an error after executing the script.
My script.
Script is used to find out the date on 8 different machines(mentioned in SERVERNAMES file).
I have added public key to avoid ssh password and ssh without password working fine.
#!/bin/sh
fn_VMFind()
{
Date=`ssh -t... (5 Replies)
Hi
Please assist. Im getting an error while execuing the script name d "cdsnd.basel.cd_new
" as siiadm user. Thanks.
siiadm> ls -l
total 64
-rwxr-xr-x 1 siiadm sboadm 1004 Sep 17 2008 cdsnd.basel.cd
-rwxr-xr-x 1 siiadm sapsys 998 Nov 16 09:14 cdsnd.basel.cd_new... (1 Reply)
Hi,
I am not able to figure out what the problem is:
getting the following error
sqltst.sh: 1: not found
here is the script
#!/bin/sh
. /home/dev1/.profile
. /home/dev1/.infenv
`sqlplus -s $REPDB_LOGON << EOF
SET SERVEROUT ON
SET FEEDBACK OFF
SET HEADING OFF
SET TRIMSPOOL... (4 Replies)
hi all,
i am getting libssh2 error while executing script in RHEL 6, when i locate that file its not there below is the ouput of this
# locate libssh2_agent_init
# cat /etc/issue
Red Hat Enterprise Linux Server release 6.1 (Santiago)
Kernel \r on an \m
how do i resolve this issue, i... (1 Reply)
I have the following script test.sh owned by dwdev account and group dwdev, the permissions on the script are as follows.
-rw-r-x--- 1 dwdev dwdev 279 Sep 17 13:19 test.sh
Groups:
cat /etc/group | grep dwdev
dwdev:x:704:dwdev
dwgroup:x:725:dwdev
writers:x:726:dwdev
User:
cat /etc/passwd |... (3 Replies)
getting error as below while executing script in linux.
OS version:
Linux VGP-3GPSDB-LX 3.10.0-514.el7.x86_64 #1 SMP Wed Oct 19 11:24:13 EDT 2016 x86_64 x86_64 x86_64 GNU/Linux
./imxtract.sh: line 395: unexpected EOF while looking for matching ``'
./imxtract.sh: line 402: syntax error:... (1 Reply)
Discussion started by: Riverstone
1 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)