Using # zpool attach rpool c3d0s0 c7d0s2 worked and the second disk got added to the rpool. How come the Oracle documentation only shows s0 and guides everywhere only use s0?
On to the next issue, installing grub.
Code:
# installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c7d0s2
raw device must be a root slice (not s2)
Unable to gather device information for /dev/rdsk/c7d0s2
So I tried s0 instead, as it is being mentioned in the oracle documentation.
Code:
# installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c7d0s0
cannot read stage1 file /boot/grub/stage1
Error opening /boot/grub/stage1
# ls -l /boot/grub/
total 3101
-rw-r--r-- 1 root bin 57 Oct 21 2011 default_video_modes.txt
-rw-r--r-- 1 root bin 5432 Nov 27 17:53 grub_cfg_net
-rw-r--r-- 1 root bin 1032704 Nov 27 17:53 grub2netx64.efi
-rw-r--r-- 1 root bin 243848 Nov 27 17:53 pxegrub2
-rw-r--r-- 1 root sys 153272 Nov 27 17:53 splash.jpg
So it seems that stage1 is nonexisting, but this is perhaps as it should be? I do not know how installgrub works.
Reading the installgrub manual #man installgrub it says that installgrub is deprecated and that bootadm install-bootloader is to be used instead. Reading the manual for bootadm did not make me much smarter so I tried running it but failed. Just in case I made a snapshot of my rpool before trying.
My system is showing following .. how can i remove this rpool .. ?
zpool status -v rpool
pool: rpool
state: UNAVAIL
status: One or more devices could not be opened. There are insufficient
replicas for the pool to continue functioning.
action: Attach the missing device and... (0 Replies)
Hi,
We have a Sun M5000. I am now trying to boot the second system domain by using the boot disk (a mirrored boot disk actually) of the first domain (if succeed then no OS installation is needed for the second domain). I got the following errors:
SPARC Enterprise M5000 Server, using Domain... (21 Replies)
I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware.
I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror.
Are there any... (1 Reply)
Hi All;
My server's root partition was encapsulated with VxVM, I try to convert it to ZFS. I successfully de-encapsulated root. Now I try to mirror 2 root disks using ZFS. But I receive following error:
# zpool create rpool mirror c0t0d0s0 c0t1d0s0
invalid vdev specification
use '-f' to... (6 Replies)
Hi guys,
I have a Solaris 10 x86 server with 2 physical disks. It had a ZFS rpool on the first disk c0t0d0s0. The server stopped booting with some error like "Cannot find bootfile".
I booted with Solaris DVD and re-installed the operating system on the second disk with a different pool... (0 Replies)
Hi,
I have rpool about 500G. So i want to use 210G from rpool and assign mount point as /database.
I seek in google and couldn't found it. Does anyone know how to achieve it?
Thanks. (2 Replies)
Hi everyone,
I am doing housekeeping of my Solaris 11 for zfs snapshot to reduce the snapshot size. I have already cleared the / file system, however the rpool size still not reduced.
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 6.9G ... (2 Replies)
Hi,
I am unable to understand that, in one of my servers while
df -kh
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 11G 29G 29% /
Even the Root FS filled on 40gb and system becomes unstable.
it is showing... (4 Replies)
I have a 240GB disk as rpool. I have installed Solaris 11.3 to a partition which is 110GB. Now I have another 130GB which is unallocated. I want to use that additional space as a temporary folder to be shared between Solaris and Linux. The additional space had no /dev/dsk/c2t4... entry so I used... (8 Replies)
Hi
Please let me know how to increase the size of rpool in solaris 11 in ldom. I know how to map the new LUN to LDOM after that please let me know the procedure to increase the rpool and how to identify new disk in OBP level of ldom as I need to set the new/lun to be my new boot device. (5 Replies)
Discussion started by: hb00
5 Replies
LEARN ABOUT DEBIAN
apt-mirror
APT-MIRROR(1) User Contributed Perl Documentation APT-MIRROR(1)NAME
apt-mirror - apt sources mirroring tool
SYNOPSIS
apt-mirror [configfile]
DESCRIPTION
A small and efficient tool that lets you mirror a part of or the whole Debian GNU/Linux distribution or any other apt sources.
Main features:
* It uses a config similar to apts sources.list
* It's fully pool comply
* It supports multithreaded downloading
* It supports multiple architectures at the same time
* It can automatically remove unneeded files
* It works well on overloaded channel to internet
* It never produces an inconsistent mirror including while mirroring
* It works on all POSIX compliant systems with perl and wget
COMMENTS
apt-mirror uses /etc/apt/mirror.list as a configuration file. By default it is tuned to official Debian or Ubuntu mirrors. Change it for
your needs.
After you setup the configuration file you may run as root:
# su - apt-mirror -c apt-mirror
Or uncomment line in /etc/cron.d/apt-mirror to enable daily mirror updates.
FILES
/etc/apt/mirror.list
Main configuration file
/etc/cron.d/apt-mirror
Cron configuration template
/var/spool/apt-mirror/mirror
Mirror places here
/var/spool/apt-mirror/skel
Place for temporarily downloaded indexes
/var/spool/apt-mirror/var
Log files placed here. URLs and MD5 summs also here.
CONFIGURATION EXAMPLES
The mirror.list configuration supports many options, the file is well commented explinging each option. here are some sample mirror
configuration lines showing the various supported ways :
Normal: deb http://example.com/debian stable main contrib non-free
Arch Specific: ( many other arch's are supported ) deb-powerpc http://example.com/debian stable main contrib non-free
HTTP and FTP Auth or non-standard port: deb http://user:pass@example.com:8080/debian stable main contrib non-free
Source Mirroring: deb-src http://example.com/debian stable main contrib non-free
ORIGINAL AUTHOR
Dmitry N. Hramtsov <hdn@nsu.ru>
CURRENT AUTHORS
Dmitry N. Hramtsov <hdn@nsu.ru> Brandon Holtsclaw <me@brandonholtsclaw.com>
perl v5.14.2 2012-01-28 APT-MIRROR(1)
04-11-2017
