Am I missing something here, shouldn't this be running against slice two (s2)?
Regards
Gull04
Indeed.
---------- Post updated at 06:31 AM ---------- Previous update was at 06:25 AM ----------
So the basic answer here is this, If you are building your zpool with virtual storage (I.E. Luns provided from a SAN, or storage exported from the global zone into the zone) you would use the whole disk I.E. c1d0. If you are in the global zone you need to provide it with the correct slice (partition). In Solaris the default slice for an OS is slice 2. So therefore you need to create the rpool against slice 2.
My system is showing following .. how can i remove this rpool .. ?
zpool status -v rpool
pool: rpool
state: UNAVAIL
status: One or more devices could not be opened. There are insufficient
replicas for the pool to continue functioning.
action: Attach the missing device and... (0 Replies)
Hi,
We have a Sun M5000. I am now trying to boot the second system domain by using the boot disk (a mirrored boot disk actually) of the first domain (if succeed then no OS installation is needed for the second domain). I got the following errors:
SPARC Enterprise M5000 Server, using Domain... (21 Replies)
I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware.
I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror.
Are there any... (1 Reply)
Hi All;
My server's root partition was encapsulated with VxVM, I try to convert it to ZFS. I successfully de-encapsulated root. Now I try to mirror 2 root disks using ZFS. But I receive following error:
# zpool create rpool mirror c0t0d0s0 c0t1d0s0
invalid vdev specification
use '-f' to... (6 Replies)
Hi guys,
I have a Solaris 10 x86 server with 2 physical disks. It had a ZFS rpool on the first disk c0t0d0s0. The server stopped booting with some error like "Cannot find bootfile".
I booted with Solaris DVD and re-installed the operating system on the second disk with a different pool... (0 Replies)
Hi,
I have rpool about 500G. So i want to use 210G from rpool and assign mount point as /database.
I seek in google and couldn't found it. Does anyone know how to achieve it?
Thanks. (2 Replies)
Hi everyone,
I am doing housekeeping of my Solaris 11 for zfs snapshot to reduce the snapshot size. I have already cleared the / file system, however the rpool size still not reduced.
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 6.9G ... (2 Replies)
Hi,
I am unable to understand that, in one of my servers while
df -kh
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 11G 29G 29% /
Even the Root FS filled on 40gb and system becomes unstable.
it is showing... (4 Replies)
I have a 240GB disk as rpool. I have installed Solaris 11.3 to a partition which is 110GB. Now I have another 130GB which is unallocated. I want to use that additional space as a temporary folder to be shared between Solaris and Linux. The additional space had no /dev/dsk/c2t4... entry so I used... (8 Replies)
Hi
Please let me know how to increase the size of rpool in solaris 11 in ldom. I know how to map the new LUN to LDOM after that please let me know the procedure to increase the rpool and how to identify new disk in OBP level of ldom as I need to set the new/lun to be my new boot device. (5 Replies)
Discussion started by: hb00
5 Replies
LEARN ABOUT HPUX
vxmirror
vxmirror(1M)vxmirror(1M)NAME
vxmirror - mirror volumes on a disk or control default mirroring
SYNOPSIS
/etc/vx/bin/vxmirror [-g diskgroup ] [-d yes|no ] [-t tasktag ] medianame [new_medianame...]
/etc/vx/bin/vxmirror [-g diskgroup ] [-d yes|no ] [-t tasktag ] -a [new_medianame...]
/etc/vx/bin/vxmirror [-g diskgroup ] [-d yes|no]
/etc/vx/bin/vxmirror [-g diskgroup] -D
DESCRIPTION
The vxmirror command provides a mechanism to mirror all non-mirrored volumes that are located on a specified disk, to mirror all currently
non-mirrored volumes in the specified disk group, or to change or display the current defaults for mirroring. All volumes that have only a
single plex (mirror copy), are mirrored by adding an additional plex.
Volumes containing subdisks that reside on more than one disk are not mirrored by vxmirror.
vxmirror is generally called from the vxdiskadm menus. It is not an interactive command, and after it is called, continues until comple-
tion of the operation or until a failure is detected.
Note: Generating mirror copies of volumes can take a considerable time to complete.
In the first listed form of this command, the disk media name is supplied on the command line to vxmirror. That name is assumed to be the
only disk from which volumes are mirrored. In the case of mirroring volumes from a specified disk, only simple single-subdisk volumes are
mirrored.
In the first and second listed forms of the command, new_medianame... identifies a new disk media name (or set of names). The mirroring
operation uses these names as targets on which to allocate the mirrors. An error results if the same disk is specified for both the source
and target disk and if no other viable targets are supplied.
Hardware-Specifc Note
Some environments provide guidelines to optimize the VxVM's interaction with intelligent storage systems. If these guidelines are present,
VxVM follows the guidelines when creating volumes or allocating space for volumes. By default, vxmirror only creates mirror volumes that
conform with these guidelines. The following options change the behavior of vxmirror:
-o override
Creates a mirror of the specified volume and ignores any storage-specific guidelines. Overriding the guidelines is not recom-
mended as it can result in incompatible objects, or objects that cannot be administered by VxVM.
-o verify Verifies that the specified mirror can be created without violating any storage-specific guidelines, but does not create the
plex. If any guidelines are violated, vxmirror exits with an error message.
Note: These options need a specific license. Without the license, vxmirror ignores the specified option.
OPTIONS -a Mirrors all existing volumes for the specified disk group.
-d yes | no
Changes the default for subsequent volume creation, depending on the option argument. If yes, then all subsequent volumes cre-
ated automatically become mirrored volumes. If no, then mirroring is turned off for future volumes created.
-D Displays current default status for mirroring.
-g diskgroup
Limits operation of the command to the given disk group, as specified by disk group ID or disk group name. The medianame oper-
ands are evaluated relative to the given disk group. If this option is not specified, the default disk group is determined using
the rules given in the vxdg(1M) manual page.
-t tasktag
Specifies using a tasktag as the tag for any tasks created to perform the mirror operations.
EXAMPLES
The following command mirrors all non-mirrored volumes on disk disk01 to the available space on any other available disk. Subsequent calls
to vxassist mirror created volumes by default.
/etc/vx/bin/vxmirror -d yes disk01
This command displays the current status of default mirroring. It outputs the string yes if mirroring is currently enabled, or no if mir-
roring is not enabled.
/etc/vx/bin/vxmirror -D
This command mirrors any volumes on disk02 to disk03.
/etc/vx/bin/vxmirror disk02 disk03
FILES
/etc/default/vxassist The defaults file for vxassist parameters.
SEE ALSO vxassist(1M), vxdiskadm(1M), vxintro(1M), vxtask(1M)VxVM 5.0.31.1 24 Mar 2008 vxmirror(1M)