That fixed it, but now I have the same problem I did before. The bash, as is works great as long as all 3 files are in the directory /home/cmccabe/QC/percent.
Since I run a process on each file, after it gets renamed it is moved to the directory. When the next filename gets renamed, the other one gets duplicated. If there is a third the first filename repeats 3 times the second filename duplicated and third is fine.
So if in /home/cmccabe/QC/percent
Code:
00-0000_Last-First_fbn1.txt
code executes a second time:
Code:
00-0000_Last-First_Last-First_fbn1.txt ---- file already in dir
01-0101_LastN-FirstN_fbn1.txt
code executes a third time:
Code:
00-0000_Last-First_Last-First_Last-First_fbn1.txt ---- file already in dir
01-0101_LastN-FirstN_LastN-FirstNfbn1.txt --- this is the 2nd file in dir
02-0202_La-Fi_fbn1.txt
Maybe I just need to only execute the command once after all 3 files are in the directory? If a file is in the directory already it has been renamed already but I'm not sure how to prevent the duplication. Thank you .
hi,
I have a script which accept filename and process them, however, one of the file needs 'special' handling so I need to identify it, say the filename contains the word "STOCK" (i.e. NEWYORKSTOCKLIST20060627.txt), I want to check if the filename contains the word "STOCK", how can I do that?... (1 Reply)
I have 20 files in a direcotry like BARE01_DLY_MKT_YYYYMMDD. The MKT differes for all these files but the remaining syntax remains the same for a particular day. If I am checking for today I need to make sure that there are 20 files that start with BARE01_DLY_MKT_20060720. How can I write a... (31 Replies)
I have searched the internet (including these forums) and perhaps I'm not using the right wording.
What I'm looking for is a function (preferably C) that analyzes the similitude of two numerical or near-numerical values, and returns either a true/false (match/nomatch) or a return code that... (4 Replies)
Dear all,
I have a specific problem that I don't quite understand how to solve. I have two files, both of the same format:
XXXXXX_FIND1 bla bla bla
bla
bla
bla
bla
bla
bla
bla
bla
bla
========
(return)
XXXXXX_FIND2 bla bla bla
bla
bla
bla (10 Replies)
Hi all,
What I would like to achieve is to batch change the code below in every pdf in a given directory (each pdf is uncompressed so that can be easily edited).
An example of the javascript code:
if (this.hostContainer) { try { this.hostContainer.postMessage(pp_216', 15259]);... (3 Replies)
Trying to match the text from file1 to file2 and print what matches in a new file (match.txt) and what does not in another (missing.txt).
awk -F'|' 'NR==FNR{c++;next};c > 0' flugent.txt IDT.txt > match.txt
Thank you :). (8 Replies)
The below bash connects to a site, downloads a file, searches that file based of user input - could be multiple (all that seems to work). What I am not able to figure out is how to display on the screen match found or no match found" and write a file to a directory (C:\Users\cmccabe\Desktop\wget)... (4 Replies)
In the bash below the unique headers of each vcf.gz are stored in a text file with the same name. That is if 16-0000-file.vcf.gz was used the header text file would be 16-0000-file_header.txt.
There can be multiple vcf.gz in a directory, usually 3, that I need to fix the header in each file before... (6 Replies)
I am trying to mv each of the .vcf files in the variants folder to the folder in /home/cmccabe/f2 that the .vcf id is found in file. $2 in file will always have the id of a .vcf in the variants folder. The line in blue staring with R_2019 in file up to the -v5.6 will always be an exact match to a... (4 Replies)
In the portion of bash below I am using rename to match the $id variable to $file and when a match (there will alwsys be one) is found then the $id is removed from each bam and bam.bai in $file and _test is added to thee file name before the extension. Each of the variables is set correctly but... (3 Replies)
Discussion started by: cmccabe
3 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)
04-02-2017
.