Sponsored Content
Operating Systems Solaris Replacing a failed disk using SVM Post 302993661 by fretagi on Monday 13th of March 2017 09:07:03 AM
Old 03-13-2017
Yes, I still have a bad disk, but at the moment I dont have a new disk. I am stuck on the line that says that I have to remove any metadb on the failed disk!
How to identify the metadb on the failed disk. the failed disk is c0t0d0but the metadb command shows the following:
Code:
 metadb
        flags           first blk       block count
     a m  p  luo        16              8192            /dev/dsk/c0t1d0s5
     a    p  luo        8208            8192            /dev/dsk/c0t1d0s5
     a    p  luo        16400           8192            /dev/dsk/c0t1d0s5
     a    p  luo        16              8192            /dev/dsk/c0t2d0s5
     a    p  luo        8208            8192            /dev/dsk/c0t2d0s5
     a    p  luo        16400           8192            /dev/dsk/c0t2d0s5
root@mhcominf01:/#

this does not show c0t0d0
Please help
 

10 More Discussions You Might Find Interesting

1. Solaris

Disk replacement with svm

I dont even know what raid level this is, but its raid 5 mirrored from the looks of it. I have a failed disk (t12) within this mirror. What is the best way to replace this disk? 2 things concern me, isn't there a command to prepare the disk for a hot swap? and what should i do with the... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies

2. Solaris

Disk Replacement SVM

Hello, Can someone advise the proper procedure for replacing a mirrored disk in SVM. I have checked the docs and various websites but the procedure seems to vary. This is what I would do... 1. Remove the db replicas from the bad disk. 2. Detach it from the mirror 3. Clear it with... (4 Replies)
Discussion started by: Actuator
4 Replies

3. Solaris

Removing Disk from SVM

Hi All, I have to remove the disk from SVM. Kindly guide me or suggest me some link where in I can steps to remove SVM from Solaris 10 .Also I have one metaset which require deletion. Thanks in anticipation! (10 Replies)
Discussion started by: kumarmani
10 Replies

4. Solaris

mirroring root disk using svm - but no free slices for metadb's

Hi all, we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this? In the past we have always kept slice 7 free -... (8 Replies)
Discussion started by: badoshi
8 Replies

5. Solaris

Disk space missing under SVM

Hi Gurus, I've got an issue here: (1) Hardware: Sun NetraT1, (2) OS: Solaris 10, (3) SVM metastat shows /var having 12 GB. df shows /var having 4 GB. Real space for /var is about 4 GB since I can't move a big file to it. How is 8 GB space missing? Does /var/run swap need to account? Can I... (5 Replies)
Discussion started by: aixlover
5 Replies

6. Solaris

Command to find the failed disks in SVM and VxVM

How to find & replace bad disks in solaris & VXVM?plz explain step by step? (2 Replies)
Discussion started by: xtreams
2 Replies

7. Solaris

Root Disk mirroring in SVM

Dear All, Please help me to configure root mirroring using SVM in Solaris 9. Thanks and Regards, Lakkireddy BR (3 Replies)
Discussion started by: lbreddy
3 Replies

8. Solaris

Replacing a hard disk (SVM) with a soft partition?

The following is the summarry:- 1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced. c1t0d0 and c1t2d0 are mirrors. c1t1d0 and c1t3d0 are mirrors. Metadb to be deleted is in c1t2d0s7 a) Mirror d35 has 2 submirrors d38 and d39 d38 is a stripe... (0 Replies)
Discussion started by: aji1729
0 Replies

9. Solaris

Root disk mirroring in SVM

I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which... (6 Replies)
Discussion started by: Laxxi
6 Replies

10. Solaris

Replacing a Disk in a ODS/SVM Mirror

Hi All BAsed on the below I would like to verifu two things (1) The udnerlying mirroris for '/mnt' na dit onlcy contaisne 1 sub-mirror, with one sliceon is one disk and hence, data loss on the mount point (the mount point, '/mnt' is backed up) (2) the Procedure for renewal # df -kh /mnt... (2 Replies)
Discussion started by: stevie_velvet
2 Replies
cmdk(7D)                                                              Devices                                                             cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 03:35 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy