I am using Redhat 9 Linux, and am trying to get my external usb drive mounted (fat32). If I look at the KDE Control panel, it lists a usb 2.0 storage device under "USB Devices" (also in /proc/bus/usb), and under "SCSI" as scsi1. I looked at /proc/scsi/usb-storage-0, and it lists it there also. What... (6 Replies)
I have a USB hard drive attached to my SCO OSR6 machine I accidently powered it off while it was mounted and now the OS complains when you try to re-mount it and it appears that it is complaining because it has a new device number so it isn't at the original device location anymore. does anyone... (1 Reply)
Hi Guys,
I have an external USB Hard Disk Drive on which I have 3 partitions and it works fine under Windows XP but when I am using Red Hat Linux 5 I don't see any icon for this USB HDD. Also I am not able to browse my USB Pen Drive. However, I can use it under Mandrake Linux without any... (4 Replies)
Hi-
I would like to know if anyone has used any USB External Hard Drive, about 500/750GB or 1TB, with any of the Solaris 10 "SPARC" systems. Not on intel nor amd platform.
I'm looking for the compatible drive and found a few listed on Sun solaris ready page, but I'd like to have inputs from... (3 Replies)
Hey i have a new USB 320GB harddrive i want to use in my Solaris 10 enviroment.
i first had the drive format in windows with FAT32,
Solaris was able to auto mount this drive and everything was fine, until i realised that it would not except files greater then 4gb, due to the limitations of... (6 Replies)
hi all,
I have a debian lenny 5.0 server without GNOME installed.
the server is at a customer's premise.
I want to backup data from the server to the external usb hard disk.
the backup will start at e.g 01:00 everyday.
the user will plug the drive before going home.
also the user will... (1 Reply)
Hi guys, I have been looking around and searching for the past hour and did not see anything. but please forgive me if I missed something.
I had a sparc 10 ultra cpu die on me, I got a replacement server from a very generous guy here, now I am getting around to remounting my old hard drive with... (0 Replies)
Hello Experts,
I hope I'm writing to the correct category for my question.
I have a very basic shell script for doing file archiving to the external usb hard drive (WD studio edition II 2TB formatted as FAT32 for compatibility). The shell script only needs to run once per day. It basically... (8 Replies)
Discussion started by: johankor
8 Replies
LEARN ABOUT BSD
cmdk
cmdk(7D) Devices cmdk(7D)NAME
cmdk - common disk driver
SYNOPSIS
cmdk@target, lun : [ partition | slice ]
DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable
disks.
The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk
records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin-
gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit-
ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk.
I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL
error.
Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the
entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area.
Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program.
FILES
/dev/dsk/cndn[s|p]n block device (IDE)
/dev/rdsk/cndn[s|p]n raw device (IDE)
where:
cn controller n
dn lun n (0-7)
sn UNIX system slice n (0-15)
pn fdisk partition(0)
/kernel/drv/cmdk 32-bit kernel module.
/kernel/drv/amd64/cmdk 64-bit kernel module.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
SEE ALSO fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I)SunOS 5.10 9 Oct 2004 cmdk(7D)