You are right, it would not matter at all, but sometimes I'm very conservative.
If you make it in one step, it takes a long time and if something goes wrong, you have to repeat the whole operation from the very beginning.
If you make it in smaller steps, in case of errors, you repeat just the last small step. If e.g. you don't have enough free space in /tmp, you fail during the first operation. If you wrong calculated the free space in the volume group (you know 14 TB are not always 14 TB ;-) you repeat only the last step, decreasing the size of the additional space.
And you can always write in a single line, something like:
Hi
my file system size /hd4 is keep on increasing continuously , i tried all the performance related command to identify which process is currently running........
for every minute my FS(/hd4) size is increasing ?what could be the problem?
how to diagnose it ?
is there any specific command... (3 Replies)
Hi All,
I need to increase the filesystem of / and /var (two different slices)? Space will be coming from /home slice so I need to decrease it. Is that possible without reinstallation or in a single-user-mode?
Any idea or link please.
Thanks in advance. (5 Replies)
Hi..
I want to increase the file system size of any filesystem online, without using the Volume manager like LVMs, is it possible? & if yes then how? (3 Replies)
How to increase the filesystem size in HACMP.
what is the difference between normal chfs command and increase the filesystem size in HACMP. (4 Replies)
Hi Gurus
I want to know the command & tips regarding, how to increase or decrease inode number of the particular ufs filesystem. Is it possible to do it in a live/production environment.
Regards (3 Replies)
Hi
I am using oracle linux 6.4. My hard drive capacity is 500 GB. my filesystem size onbly 50GB. I would like to extend my filesystem size to around 100GB. I tried many codes but still I am not able.
this is the output of df -h :
Filesystem Size Used Avail Use% Mounted on... (6 Replies)
Hi all,
Do i need to increase the logical volume each time i increase the filesystem?
or is enough to increase the filesystem and the logical volume get increase automatically?
extendlv hd4 1
chfs -a size=2G /tmp
or just
chfs -a size=2G /tmp
Code tags! (4 Replies)
I an trying to increase the file size on an AIX 5.3 box. I think i am missing the correct syntax for the command. Here is was i am trying on a test box
# lsvg rootvg
VOLUME GROUP: rootvg VG IDENTIFIER: 0000bd8b00004c00000
0010d8ed7a76e
VG STATE: active ... (3 Replies)
Discussion started by: fierfek
3 Replies
LEARN ABOUT DEBIAN
kbdrate
KBDRATE(8) Linux Programmer's Manual KBDRATE(8)NAME
kbdrate - reset the keyboard repeat rate and delay time
SYNOPSIS
kbdrate [ -s ] [ -r rate ] [ -d delay ]
DESCRIPTION
kbdrate is used to change the keyboard repeat rate and delay time. The delay is the amount of time that a key must be depressed before it
will start to repeat.
Using kbdrate without any options will reset the repeat rate to 10.9 characters per second (cps) and the delay to 250 milliseconds (ms) for
Intel- and M68K-based systems. These are the IBM defaults. On SPARC-based systems it will reset the repeat rate to 5 cps and the delay to
200 ms.
OPTIONS -s Silent. No messages are printed.
-r rate
Change the keyboard repeat rate to rate cps. For Intel-based systems, the allowable range is from 2.0 to 30.0 cps. Only certain,
specific values are possible, and the program will select the nearest possible value to the one specified. The possible values are
given, in characters per second, as follows: 2.0, 2.1, 2.3, 2.5, 2.7, 3.0, 3.3, 3.7, 4.0, 4.3, 4.6, 5.0, 5.5, 6.0, 6.7, 7.5, 8.0,
8.6, 9.2, 10.0, 10.9, 12.0, 13.3, 15.0, 16.0, 17.1, 18.5, 20.0, 21.8, 24.0, 26.7, 30.0. For SPARC-based systems, the allowable
range is from 0 (no repeat) to 50 cps.
-d delay
Change the delay to delay milliseconds. For Intel-based systems, the allowable range is from 250 to 1000 ms, in 250 ms steps. For
SPARC systems, possible values are between 10 ms and 1440 ms, in 10 ms steps.
-V Display a version number and exit.
BUGS
Not all keyboards support all rates.
Not all keyboards have the rates mapped in the same way.
Setting the repeat rate on the Gateway AnyKey keyboard does not work. If someone with a Gateway figures out how to program the keyboard,
please send mail to util-linux@math.uio.no.
All this is very architecture dependent. Nowadays kbdrate first tries the KDKBDREP and KIOCSRATE ioctls. (The former usually works on an
m68k machine, the latter for SPARC.) When these ioctls fail an ioport interface as on i386 is assumed.
FILES
/etc/rc.local
/dev/port
Linux 1.1.19 22 June 1994 KBDRATE(8)