Get output of multiple pattern match from first field to a file
Hi All,
Greetings!
I have a file of 40000+ lines with different entries, I need matching entries filterd out to their files based on first filed pattern for the matching :
For example:
All server1 entries (in field1) to come together with its path in 2nd field.
The best output I want to have it should generate filename for each:
Say server1.out file: which would be having "first field" and "second filed" of server1.
And so on for all the serverX .
I am fairly new in unix I was wondering if anybody can help me out with this:
I am trying to output to a file the following fields;
Field1
Field2
Field4
From a database file dataBase1.
this is how the file looks:
dataBase1 TABLE DATA Example
==================
Table ... (3 Replies)
First, thanks for the help in previous posts... couldn't have gotten where I am now without it!
So here is what I have, I use AWK to match $1 and $2 as 1 string in file1 to $1 and $2 as 1 string in file2. Now I'm wondering if I can extend this AWK command to incorporate the following:
If $1... (4 Replies)
I need to match two patterns in a log file and need to get the next line of the one of the pattern (out of two patterns) that is matched,
finally need to print these three values in a single line.
Sample Log:
2013/06/11 14:29:04 <0999> (725102) Processing batch 02_1231324
2013/06/11... (4 Replies)
Hello Experts , require help . See below output:
File inputs
------------------------------------------
Server Host = mike
id rl images allocated last updated density
vimages expiration last read <------- STATUS ------->... (4 Replies)
Not sure how I can accomplish this. I would like to remove all interfaces that have the commands I would like to see: switchport port-security, spanning-tree portfast. One line is no problem.
interface FastEthernet0/8
spanning-tree portfast
interface FastEthernet0/9
spanning-tree... (4 Replies)
GM,
I have an issue at work, which requires a simple solution. But, after multiple attempts, I have not been able to hit on the code needed.
I am assuming that sed, awk or even perl could do what I need.
I have an application that adds extra blank page feeds, for multiple reports, when... (7 Replies)
Looking for help,
i have input file like below and want to modify to expected output, if can without create additional file, hope can direct modify it.
have 2 thing need do.
1st
is adding a word (testplan generation off) after ! ! IPG: Tue Aug 07 14:31:17 2018
2nd
is adding... (16 Replies)
Discussion started by: kttan
16 Replies
LEARN ABOUT ULTRIX
ntp.conf
ntp.conf(5) File Formats Manual ntp.conf(5)Name
ntp.conf - Network Time Protocol configuration file
Description
The file is the configuration file for the Network Time Protocol (NTP) daemon, This file must be configured on your system before running
Any host names that you specify in the file must have an entry in the file, or an entry in the master database, if the database is being
served to your system by BIND/Hesiod or Yellow Pages.
The file has four entry formats:
trusting no
This entry guarantees that your system synchronizes only to the NTP servers identified in the peer and server entries specified. Dig-
ital recommends that all systems include the entry.
peer server
This entry identifies server as one of the NTP servers that your system trusts, and from which your system will accept time synchro-
nization. Your system may also provide time synchronization to this server. Servers can be identified by host name or internet
address.
NTP servers should be configured with entries.
server server
This entry identifies server as one of the NTP servers that your system trusts, and from which your system will accept time synchro-
nization. Your system can not provide time synchronization to this server. Servers can be identified by host name or internet
address.
NTP clients should be configured with entries.
peer /dev/null LOCL 1 -5 local
This entry identifies your system as a local reference clock. A local reference clock is the most accurate system clock available at
your site. If you receive time synchronization from the Internet NTP service, you should not include this entry on any of your sys-
tems. At most, one system in a set of nodes running should be identified as a local reference clock.
A host which specifies this entry should not specify any or entries.
Examples
This is a sample configuration file for an NTP client which receives time synchronization from the NTP servers: and Lines beginning with a
number sign (#) are comments.
#
# NTP Configuration File
# This file is mandatory for the ntpd daemon
#
#
#
# ** A L L **
#
# "trusting no" prevents this host from synchronizing
# to any host that is not listed below. It is recommended
# that all hosts include the line "trusting no".
#
trusting no
#
#
# ** S E R V E R **
#
# If you are configuring a server, use "peer" entries to
# synchronize to other NTP servers. For example, server1,
# server2, and server3.
#
#peer server1
#peer server2
#peer server3
#
#
#
#
# ** C L I E N T **
#
# If you are configuring a client, use "server" entries to
# synchronize to NTP servers. For example, server1, server2,
# and server3.
#
server server1
server server2
server server3
#
#
#
# ** L O C A L R E F E R E N C E C L O C K **
#
# If you are configuring a local reference clock, include the
# following entry and the "trusting no" entry ONLY.
#
#peer /dev/null LOCL 1 -5 local
#
See Alsontp(1), ntpd(8), ntpdc(8)
RFC 1129--Internet time synchronization: The Network Time Protocol
Introduction to Networking and Distributed System Services
ntp.conf(5)