okay, so I hang on to my version of antix (that offers unetbootin) making a bootable usb-stick, because gpart is dragging me down. And just adding this, I coud go for the commandline like
.
That is putting fun back into your distro.
Sure, unetbootin uses all of the media. But thanks, anyway.
It's been more than eight years I have been using CD or DVD media at all, and since I took off the CD-Drive I am really lazy to put it back, just to burn once in a while a CD.
Last edited by rbatte1; 01-20-2017 at 08:03 AM..
Reason: CD or DVD usage
Hello Everybody
I am planning to install Fedora core 8 on an extra PC I have; what I wanna do is to boot from a USB stick then install Fedora from an ISO image I already have via FTP. Could any one tell me how to create bootable USB Stick for Fedora as I already found how to install from FTP... (0 Replies)
I have a P-Series Machine running AIX 5.3, it has a USB Port on the front of the server, can I use a USB Stick on AIX platforms?? if so how..:rolleyes: (2 Replies)
I inserted a 8GB usb stick in a number of machine with FreeBSD 7.1, but the medium was not detected:
$ dmesg | grep MB
usable memory = 4263022592 (4065 MB)
avail memory = 4082540544 (3893 MB)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ad0: 238475MB <WDC WD2500BEVT-00ZCT0... (6 Replies)
Dummies questions, perfect for this. I cannot mount my idiotic usb stick on Slackware, I input the following on non-graphic mode as root:
Mount -t vfat /dev/sdc1/usbstick
usbstick is the folder i created for mounting my USB, the file system is FAT, and everytime I input that I get some kind... (2 Replies)
When mounting a USB stick or pen drive on a FreeBSD machine I always issue the following command:
mount -t msdosfs /dev/da0s1 /mnt
Something I have always wondered is what the option msdosfs stands for and more importantly, why it is necessary. (7 Replies)
Hello,
i am using a solaris thinclient that tries to connecting to a terminalserver. (RDP) Everything works fine, but the usb redirection. If i put in a usb stick i always get 2 usb-drives mounted. If i look in /tmp/SUNWut/mnt/<name of the host> i see 2 devices. One with the name of the... (2 Replies)
Hey Guys
I have an Ubuntu CD and I was thinking of creating like a bootable hard drive with various OS so that I can just boot OSs with t drive and not require the CDs. I was just wondering is there a way I can do this, like have Ubuntu boot from a USB stick? If yes how is that possible(even if I... (3 Replies)
hi
Howto mount an USB stick under SCO 5.0.7?
BTW ist it possible to mount USB stick in the command line using 'tools' at the Boot: prompt from OpenServer Release 5.0.7 installation CD? (1 Reply)
I'd like to install the OS on my stick. I would like to be able to save my works there and install apps or customize the OS.
What can I do
Ps. At home I use an iMac, but in the school where I work there are only PC...
Ty (2 Replies)
I am trying to use a USB (Pen?) drive on Unixware 7.1.4.
The USB stick is in the machine and the machine recognises it when I enter usbprobe as follows:
Path - Address Description
-----------------------------
+++++++ BUS #2
0 - 1 - HUB "UHCI Root Hub"
1 - 2 - HID "Chicony Wireless Device"... (1 Reply)
Discussion started by: BernP
1 Replies
LEARN ABOUT DEBIAN
fpga_load
FPGA_LOAD(8)FPGA_LOAD(8)NAME
fpga_load - Xorcom Astribank (xpp) firmware tool
SYNOPSIS
fpga_load [-g] [-r] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV
fpga_load [-g] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV -I firmware.hex [-b dump.bin] [-i]
fpga_load -h
DESCRIPTION
fpga_load loads the FPGA firmware to the Xorcom Astribank device. The syntax resembles that of fxload(8).
OPTIONS -b dump.bin
Before writing firmware, bump the processed binary file to dump.bin.
-D DEVICE
Required. The device to read from/write to. On modern UDEV-based system this is usually /dev/bus/usb/bus_num/device_num, where
bus_num and device_num are the first two numbers in the output of lsusb(8). On older systems that use usbfs, it is usually
/proc/bus/usb/bus_num/device_num.
-r
Reset the Astribank and renumerate its USB connection to power on product ID.
-g
Dump all eeprom data to standard output.
-I fireware_file
The firmware file to write to the device.
-i
Show information about the firmware file (valid only with -I option). Example:
./FPGA_1151.hex: Version=3297 Checksum=58270
In particular, the calculated checksum should match the output of sum(1) on the binary firmware file generated by the -b option.
-v
Increase verbosity. May be used multiple times.
-h
Displays usage message.
SEE ALSO fxload(8), lsusb(8)AUTHOR
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> . Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
16 April 2006 FPGA_LOAD(8)