Hi,
I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings.
Do I need... (6 Replies)
Hi!
I am using Slackware 12.1 and I have a question regarding LaTeX.
I am trying to use the package ucs, so that I can write in greek, but with no success. In Debian there is a package latex-ucs.deb that does the trick. Is there something similar in Slackware?
Thanks in advance (1 Reply)
I am writing perl script to configure Cisco device but Variables inside Net::Telnet::Cisco Module doesn't work and passed to device without resolving.
Please advise.
here is a sample of script:
use Net::Telnet::Cisco;
$device = "10.14.199.1";
($o1, $o2, $o3, $o4) = split(/\./,$device);... (5 Replies)
I having problem connecting to a Cisco PIX
Log from IKE
# /usr/lib/inet/in.iked -f /etc/inet/ike/config -d
Jan 16 00:40:57: 2012 (+0800) *** in.iked started ***
Jan 16 00:40:57: Loading configuration...
Jan 16 00:40:57: Checking lifetimes in "nullrule"
Jan 16 00:40:57: Using default value... (0 Replies)
I am installing RHEL6 on a Cisco UCS blade and the GUI isn't showing up. Curious!!!!! I have installed it on 5 of the other blades and the GUI is there. However, there are many issues that I am having and I am going crazy with this thing. I have issues where the network adapters are not showing... (1 Reply)
Is there an easy way to stack Cisco 2960-S and Cisco 2960X switches? If you have no idea, follow this:
1. Stacking is not supported on switches running the LAN Lite image. All switches in the stack must be running the LAN Base image.
2. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S... (0 Replies)
Discussion started by: Ayaerlee
0 Replies
LEARN ABOUT XFREE86
pcitweak
PCITWEAK(1) General Commands Manual PCITWEAK(1)NAME
pcitweak - read/write PCI config space
SYNOPSIS
pcitweak -l
pcitweak -r PCI-ID [-b|-h] offset
pcitweak -w PCI-ID [-b|-h] offset value
DESCRIPTION
Pcitweak is a utility that can be used to examine or change registers in the PCI configuration space. On most platforms pcitweak can only
be run by the root user.
OPTIONS -l Probe the PCI buses and print a line for each detected device. Each line contains the bus location (bus:device:function), chip
vendor/device, card (subsystem) vendor/card, revision, class and header type. All values printed are in hexadecimal.
-r PCI-ID
Read the PCI configuration space register at offset for the PCI device at bus location PCI-ID. PCI-ID should be given in the form
bus:device:function, with each value in hexadecimal. By default, a 32-bit register is read.
-w PCI-ID
Write value to the PCI configuration space register at offset for the PCI device at bus location PCI-ID. PCI-ID should be given in
the form bus:device:function, with each value in hexadecimal. By default, a 32-bit register is written.
-b Read or write an 8-bit value (byte).
-h Read or write a 16-bit value (halfword).
SEE ALSO scanpci(1)AUTHORS
David Dawes (dawes@xfree86.org).
XFree86 Version 4.7.0 PCITWEAK(1)