I'm trying to insert multiple new lines of text into an iptables script using sed in a while loop. I'm not sure if this is the most effective way. Searching the forums has helped me come up with a good beginning but it's not 100%. I'd like it to search out a unique line in my current iptables file... (2 Replies)
Hi
I have small home network and I want to block some forums on web
When I use this
iptables -A INPUT -s forum -j DROP
rules is applied but when I restart some of PC rules are not present any more also I tried to save firewall settings
iptables-save > /root/dsl.fw
but how to... (2 Replies)
Hello,
I was playing around with iptables to setup an isolated system. On a SLES10 system, I ran the below to setup my first draft of rules. I noticed that the rules come into effect immediately and do not require any restart of iptables.
iptables -A INPUT -j ACCEPT
iptables -A OUTPUT -m... (4 Replies)
Could someone help me with writing rules for iptables?
I need a dos attacks protection for a game server.
port type udp
ports 27015:27030
interface: eth0
Accept all packets from all IPs
Chek if IP sent more than 50 packets per second
Drop all packets from this IP for 5 minutes
I would be... (0 Replies)
Hi Gurus,
I need to add Multicast Port = xyz
Multicast Address = 123.134.143 ( example) to my firewall rules. Can you please guide me with the lines I need to update my iptables files with. (0 Replies)
Hi Champs
i am new in Iptables and trying to write rules for my Samba server.I took some help from internet, created one script and run from rc.local :
#Allow loopback
iptables -I INPUT -i lo -j ACCEPT
# Accept packets from Trusted network
iptables -A INPUT -s my-network/subnet -j... (0 Replies)
Hello,
I have iptables service running on my CentOS5 server. It has approx 50 rules right now.
The problem I am facing now is as follows -
I have to define a new chain in the filter table, say DOS_RULES & add all rules in this chain starting from index number 15 in the filter table.
... (1 Reply)
Hello,
I did 2 scripts. The second one is, I hope, more secure.
What do you think?
Basic connection (no server, no router, no DHCP and the Ipv6 is disabled)
#######script one
####################
iptables -F
iptables -X -t filter
iptables -P INPUT DROP
iptables -P FORWARD... (6 Replies)
Hi, I am relatively new to firewalls and netfilter. I have a Debian Stretch router box running dnsmasq, connected to a VPN. Occasionally dnsmasq polls all of the desired DNS servers to select the fastest. When it does this it responds to replies of the non-selected DNS servers with a icmp type... (0 Replies)
Discussion started by: CrazyDave
0 Replies
LEARN ABOUT DEBIAN
vlan-interfaces
VLAN-INTERFACES(5) File formats VLAN-INTERFACES(5)NAME
/etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format
DESCRIPTION
/etc/network/interfaces contains network interface configuration information for the ifup(8) and ifdown(8) commands. This manpage
describes the vlan extensions to the standard interfaces(5) file format.
Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which are gener-
ally needed when using (a lot of) vlans.
VLAN CREATION
Vlan interface definitions exist of the vlan interface name, and an optional 'raw-device' parameter. Vlan interfaces are numbered 1 to
4095. You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero. The following
example shows four ways to create a vlan with id 1 on interface eth0. They all result in different names.
iface eth0.1 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan1 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
iface eth0.0001 inet static
address 192.168.1.1
netmask 255.255.255.0
iface vlan0001 inet static
vlan-raw-device eth0
address 192.168.1.1
netmask 255.255.255.0
# We don't have br support out of the box
iface br0.2 inet static
vlan-raw-device br0
address 192.168.1.1
netmask 255.255.255.0
# Aliases are ignored
iface br0.2:1 inet static
address 192.168.1.1
netmask 255.255.255.255
EXTRA IFACE OPTIONS
Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.
vlan-raw-device devicename
Indicates the device to create the vlan on. This is ignored when the devicename is part of the vlan interface name.
ip-proxy-arp 0|1
Turn proxy-arp off or on for this specific interface. This also works on plain ethernet like devices.
ip-rp-filter 0|1|2
Set the return path filter for this specific interface. This also works on plain ethernet like devices.
hw-mac-address mac-address
This sets the mac address of the interface before bringing it up. This works on any device that allows setting the hardware address
with the ip command.
AUTHOR
This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>
SEE ALSO vconfig(8)interfaces(5)vlan September 30 2007 VLAN-INTERFACES(5)