I'm trying to insert multiple new lines of text into an iptables script using sed in a while loop. I'm not sure if this is the most effective way. Searching the forums has helped me come up with a good beginning but it's not 100%. I'd like it to search out a unique line in my current iptables file... (2 Replies)
Hi
I have small home network and I want to block some forums on web
When I use this
iptables -A INPUT -s forum -j DROP
rules is applied but when I restart some of PC rules are not present any more also I tried to save firewall settings
iptables-save > /root/dsl.fw
but how to... (2 Replies)
Hello,
I was playing around with iptables to setup an isolated system. On a SLES10 system, I ran the below to setup my first draft of rules. I noticed that the rules come into effect immediately and do not require any restart of iptables.
iptables -A INPUT -j ACCEPT
iptables -A OUTPUT -m... (4 Replies)
Could someone help me with writing rules for iptables?
I need a dos attacks protection for a game server.
port type udp
ports 27015:27030
interface: eth0
Accept all packets from all IPs
Chek if IP sent more than 50 packets per second
Drop all packets from this IP for 5 minutes
I would be... (0 Replies)
Hi Gurus,
I need to add Multicast Port = xyz
Multicast Address = 123.134.143 ( example) to my firewall rules. Can you please guide me with the lines I need to update my iptables files with. (0 Replies)
Hi Champs
i am new in Iptables and trying to write rules for my Samba server.I took some help from internet, created one script and run from rc.local :
#Allow loopback
iptables -I INPUT -i lo -j ACCEPT
# Accept packets from Trusted network
iptables -A INPUT -s my-network/subnet -j... (0 Replies)
Hello,
I have iptables service running on my CentOS5 server. It has approx 50 rules right now.
The problem I am facing now is as follows -
I have to define a new chain in the filter table, say DOS_RULES & add all rules in this chain starting from index number 15 in the filter table.
... (1 Reply)
Hello,
I did 2 scripts. The second one is, I hope, more secure.
What do you think?
Basic connection (no server, no router, no DHCP and the Ipv6 is disabled)
#######script one
####################
iptables -F
iptables -X -t filter
iptables -P INPUT DROP
iptables -P FORWARD... (6 Replies)
Hi, I am relatively new to firewalls and netfilter. I have a Debian Stretch router box running dnsmasq, connected to a VPN. Occasionally dnsmasq polls all of the desired DNS servers to select the fastest. When it does this it responds to replies of the non-selected DNS servers with a icmp type... (0 Replies)
Discussion started by: CrazyDave
0 Replies
LEARN ABOUT DEBIAN
essidscan
ESSIDSCAN(8) Commands ESSIDSCAN(8)NAME
essidscan - scan for ESSID corresponding to available WLAN access points
SYNOPSIS
In /etc/network/interfaces:
mapping <interface> script essidscan
DESCRIPTION
The essidscan utility is used to tell the ifup and ifdown utilities about the current SSID of the WLAN currently being accessed. It can be
used to map the SSID name to an iface stanza.
CONFIGURATION
A sample /etc/network/interfaces may look like this:
mapping hotplug
script /etc/network/essidscan
map SSIDONE wlan-work
map SSIDTWO wlan-work
map HOME
iface wlan-work inet dhcp
wireless-key 1234-5678-9ABC-DEF0-1234-5678-9A
wireless-keymode restricted
iface HOME inet static
address 192.168.2.4
netmask 255.255.255.0
gateway 192.168.2.1
wireless-essid HOME
wireless-key s:somepassword
wireless-keymode open
iface DEFAULT inet dhcp
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
SEE ALSO interfaces(5)ifscheme(8)ifup(8)ifdown(8)AUTHORS
Tor Slettnes <tor@slett.net>
ESSIDSCAN(8)