Solaris 10 installing on Cisco UCS doesn't see HBAs Post: 302988543

Sponsored Content

Operating Systems Solaris Solaris 10 installing on Cisco UCS doesn't see HBAs Post 302988543 by jnojr on Tuesday 27th of December 2016 05:50:52 PM

12-27-2016

Registered User

Solaris 10 installing on Cisco UCS doesn't see HBAs

The chassis config is right... this blade can boot to VMware ESXi and see HBAs and LUNs. Solaris isn't seeing the HBAs at all... luxadm probe returns ERROR: No Fibre Channel Adapters found.
fcinfo hba-port -l returns No Adapters Found.

prtdiag -v gets me:

Code:

==== Upgradeable Slots ==============================

ID  Status    Type            Description
--- --------- --------------- -----------------------
0   in use    Unknown         MLOM Slot
1   unknown   Unknown         Mezzanine Slot 1

I cannot find a download for drivers for UCS and Solaris, or I'd be figuring I need to stand up a jumpstart server or otherwise customize the install process. Googling turns up some old posts that seem to suggest that Solaris can be installed on this hardware. So I could use a pointer!

Last edited by rbatte1; 12-28-2016 at 08:03 AM.. Reason: Added ICODE tags

jnojr

View Public Profile for jnojr

Find all posts by jnojr

6 More Discussions You Might Find Interesting

1. Solaris

Connect Solaris 10 to NetApp filer using Emulex single port HBAs.

Hi, I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings. Do I need...

2. Slackware

latex-ucs

Hi! I am using Slackware 12.1 and I have a question regarding LaTeX. I am trying to use the package ucs, so that I can write in greek, but with no success. In Debian there is a package latex-ucs.deb that does the trick. Is there something similar in Slackware? Thanks in advance

3. Shell Programming and Scripting

Perl variables inside Net::Telnet::Cisco Module doesn't work

I am writing perl script to configure Cisco device but Variables inside Net::Telnet::Cisco Module doesn't work and passed to device without resolving. Please advise. here is a sample of script: use Net::Telnet::Cisco; $device = "10.14.199.1"; ($o1, $o2, $o3, $o4) = split(/\./,$device);...

4. Solaris

Connecting Solaris 10 to Cisco PIX with IPsec tunnel

I having problem connecting to a Cisco PIX Log from IKE # /usr/lib/inet/in.iked -f /etc/inet/ike/config -d Jan 16 00:40:57: 2012 (+0800) *** in.iked started *** Jan 16 00:40:57: Loading configuration... Jan 16 00:40:57: Checking lifetimes in "nullrule" Jan 16 00:40:57: Using default value...

5. Red Hat

UCS installation issues

I am installing RHEL6 on a Cisco UCS blade and the GUI isn't showing up. Curious!!!!! I have installed it on 5 of the other blades and the GUI is there. However, there are many issues that I am having and I am going crazy with this thing. I have issues where the network adapters are not showing...

6. IP Networking

How to stack Cisco 2960-S and Cisco 2960X?

Is there an easy way to stack Cisco 2960-S and Cisco 2960X switches? If you have no idea, follow this: 1. Stacking is not supported on switches running the LAN Lite image. All switches in the stack must be running the LAN Base image. 2. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S...

LEARN ABOUT DEBIAN

ql-dynamic-tgt-lun-disc

ql-dynamic-tgt-disc(8)					       System Administration					    ql-dynamic-tgt-disc(8)

NAME

       ql-dynamic-tgt-lun-disc - Scans for newly added LUNs.

SYNOPSIS

       ql-dynamic-tgt-lun-disc [OPTIONS]

DESCRIPTION

       Dynamic TGT-LUN Discovery Utility

       This  utility  scans  for  newly added LUNs. After adding new LUNs, you do not need to unload, then load the QLogic FC driver or reboot the
       system

       To begin scanning the LUNs issue following command:

	      # /usr/sbin/ql-dynamic-tgt-lun-disc

       -al,   --allow-lip
	      LIP is not issued by default, even if it is required for scanning new LUNs Setting this option, allows the utility to issue LIP.

       -cl, --current-luns
	      Displays LUNS currently present

       -e,  --extended-scan
	      Use this option as "-e | --extended-scan". to rescan LUNs. This will identify any change in attributes of existing LUNs. This option
	      can be used in combination of scan/refresh or max luns

       -h,  --help, ?
	      Prints this help message

       -i,  --interactive
	      Use this option to use the menu driven program

       -is,  --iscsi
	      Use this option to operate on ISCSI HBAs, this option can be used in combination of any other supported option.

       -m,  --max-lun
	      To set the maximum LUNs to be scanned

       -p,  --proc
	      Use PROC file system for LUN scanning

       -r,  --refresh
	      To refresh, that is remove LUNs that are lost use the options "-r|--refresh". This will remove the LUNs which no more exist.

       -s,  --scan [ -r|--refresh ]
	      The QLogic LUN scan utility re-scans all the devices connected to the QLogic HBA

SEE ALSO

       ql-lun-state-online(8), ql-hba-snapshot(8), ql-set-cmd-timeout(8)

Matthias Schmitz <;matthias@sigxcpu.org> 			     July 2009						    ql-dynamic-tgt-disc(8)