Bond Configuration change not reflected. Post: 302988446

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

I need to change printer configuration

We have several Printers that are pointing to a print server that is now defunct. I need to point these printers to the new print server. I am aware I need to change the configuration in /usr/spool/lp/admins/lp/printers/printername/configuration as well as in /etc/printers.conf. However my...

2. Shell Programming and Scripting

sed to change a configuration file

Hi I want to create a configuration file from a template one. The only thing to change for now is the port number that I need to take from another file that has this format: server:port So I need to take the 2nd field. server is passed in the script argument. how to do that? I...

3. Filesystems, Disks and Memory

garbage collection not reflected in the nmon

i have my application running on AIX box (configuration given below) My application does garbage collection pretty well, as such the memory free shows 500 MB - 700 MB freed up in the log statements printed in the application, but the nmon shows the physical space going upwards and does not reflect...

4. AIX

Slave NIS server configuration change

Hello Everybody, I have a question regarding SLAVE NIS SERVER in aix. We are using NIS master of Sun Solaris 9.0 which is on different subnet i.e. 10.197.93.0. And Our slave server is having AIX 5.3 installed which is on 10.207.13.0 subnet. I have a query regarding its name and ip address...

5. UNIX for Advanced & Expert Users

How to bond network interfaces

All, I have a quad NIC on a V880 running Solaris 9. I've heard you can bond interfaces together and get better throughput. I found this link that seems to describe the process well. However, the command mentioned (dladm) is missing. Is there some package I need to install to get this command? Thx....

6. Red Hat

Bonding a Bond with LACP

Does anyone know if it's possible to bond two bonds together? My situation is I have two older Cisco switches that cannot carry a LACP (bond level 4) aggregated between them, but separate aggregates can be setup on the switches themselves. In order to have redundancy of two switches I would...

7. Emergency UNIX and Linux Support

HP-UX: Help to Change network configuration from APA manual mode (2Gbps) to simple fail over (1Gbps)

Hello HP-UX experts, Server = rx8640 Node partition OS = HP-UX 11.23 arch = IA64 Network switch = Foundry 16 port switch (1Gbps) Existing configuration: Tough to explain as it is very messy (see below for the link of zip of network related fles). 2 x 2Gbps aggregates configured some time...

8. Red Hat

How to change bonding configuration in Linux 5.9?

I have 2 ethernet port in my linux (Red hat 5.9) machine.The 2 ethernet ports (eth0 and eth1)are bonded and are making one single ethernet port namely bond0. I have adaptive load share option selected.Now in this condition, if my eth0 port disconnected due to some failure, then will eth1 take the...

9. IP Networking

Centos/Redhat 7 - Team or Bond

Hello my dears, I preparing system running linux. I found that team is advantage than bond with the option "load-balancing for LACP support" and some minor advantages. 8.3. Comparison of Network Teaming to Bonding - Red Hat Customer Portal. But what exactly meaning of this option I don't...

LEARN ABOUT SUSE

ifcfg-bonding

IFCFG-BONDING(5)					       Network configuration						  IFCFG-BONDING(5)

NAME

       ifcfg-bonding - interface bonding configuration

SYNOPSIS

       /etc/sysconfig/network/ifcfg-bond*

Bonding Interfaces
       To setup a bonding interface you need a configuration file ifcfg-bond<X> with the usual network settings. But you must add additional vari-
       ables

       BONDING_MASTER
	      must be set to 'yes' to identify this interface as a bonding interface

       BONDING_SLAVE_<X>
	      here you specify the interface name representing the slave network interfaces.

       BONDING_MODULE_OPTS
	      contains bonding options. Here you can set interface timeouts or working modes ('mode=active-backup' for	backup	mode).	For  addi-
	      tional information take a look into the documentation mentioned at the bottom.  Note, that this options are not passed as parameters
	      to the bonding kernel module any more, but set via sysfs interface. This variable will be renamed in the feature.

       BONDING_SKIP_REMOVE_WORKAROUND
	      When set to "yes", a bonding interface will be not removed while ifdown any more to avoid problems, e.g. when some third party  ker-
	      nel module, such as Veritas 'llt' module, does not react correctly to the UNREGISTER event and does not remove its references to the
	      bonding interface causing all network related operation to stuck.

	      Note: the bonding options are not reverted when this option is enabled and it is required to either explicitly keep the old  options
	      and set them to their default setting on bonding configuration changes or to reboot.

Example
       Example for a bonding interface on eth0 and eth1 using the backup mode

       ifcfg-bond0
	  STARTMODE='onboot'
	  BOOTPROTO='static'
	  IPADDR='192.168.0.1/24'

	  BONDING_MASTER='yes'
	  BONDING_SLAVE_0='eth0'
	  BONDING_SLAVE_1='eth1'
	  BONDING_MODULE_OPTS='mode=active-backup miimon=100'

Additional Information
       For  additional	and  more  general  information  take  a look into /usr/src/linux/Documentation/networking/bonding.txt.  Maybe you need to
       install the kernel sources to get this additional documentation.

       The configuration of routes for this kind of interface does not differ from ordinary interfaces. See man routes for details.

BUGS

       Please report bugs at <http://www.suse.de/feedback>

AUTHOR

       Christian Zoz <zoz@suse.de> -- ifup script
       Wilken Gottwalt <wgottwalt@suse.de> -- ifcfg-bonding manual page

SEE ALSO

       ifcfg(5), ifup(8).

sysconfig							    April 2005							  IFCFG-BONDING(5)