We used kstat on netra240/440 to check if the link is full duplex. So we do something like:
bash-3.00# kstat -pc net bge:1::/'link_duplex'/ | cut -f2
2
The output 2 indicates the link is full duplex. This kind of check worked all right for Netra 240/440 systems.
However, the nxge... (2 Replies)
I 've 2 different T5220 and both are showing different prompts when i ssh to the console.
1. Shows sc> ALOM
2. Shows -> ILOM
as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ?
and i found that we... (6 Replies)
Hi,
SC on one of my T5220 is not responding .. it does not show not let me type anything .. what could be the reason for it ? though when i powercycle the box from sc it shows me the system coming up but after that does not let me login thru sc
sc> console -f
Enter #. to return to ALOM. (2 Replies)
We're just about to migrate a large application from an Enterprise 6900 to a pair of T5220s utilising LDOMs. Does anyone have any experience of LDOMs on this kit and can provide any recommendations or pitfalls to avoid?
I've heard that use of LDOMs can have an impact on I/O speeds as it's all... (9 Replies)
Hi,
We have two T5220 servers in our datacentre
one server is showing 64 processors online
and another showing 32 processors online
two are newly purchased, there is no hardware faults in this server
one server has 64gb memory and it shows 64 processors,
and other having 32gb memory and it... (5 Replies)
I have a new T5220 racked at our remote office and the guys who racked it does not know how to configure the SP on the system .. is there any way i can do it remotely ? (1 Reply)
I'm trying to use a V210 (sun4u) configured as a jumpstart server to flash install a number of T5220's (sunv4).
The Facts:
V210 - Solaris 10 (September 2010 Release / not patched)
T5220's - Archive's created using prior (unknown) version of solaris 10.
Flar -i <archive name> shows the... (6 Replies)
Hi Guys and Gals,
Wondering if anyone could help me, tricky one this.
Got a T5220 with a graphics card. When you power it on, it outputs its output to the screen and you can type commands with the keyboard etc.
But no matter what version of Solaris 10 you use, when you do a boot cdrom... (1 Reply)
Hello guys,
can anyone give me some advice on how to perform
clean installation of Solaris 10 on T5220 ?
I am connected with serial management port on the machine,
i have the ok promt and now i should eject the dvdrom to insert
Solaris dvd into and start the clean install.
So how to do that... (3 Replies)
We have one box T5220 which was assigned 2x100G Luns but i have a strange problem if i use powermt display it only shows me one card but cfgadm, fcinfo commands shows 2 dual port cards as up. What could be the reason for it. I already did a re-configure reboot but that didn't help. Can anyone help... (1 Reply)
Discussion started by: fugitive
1 Replies
LEARN ABOUT SUNOS
fmd
fmd(1M) System Administration Commands fmd(1M)NAME
fmd - fault manager daemon
SYNOPSIS
/usr/lib/fm/fmd/fmd [-V] [-f file] [-o opt=val] [-R dir]
DESCRIPTION
fmd is a daemon that runs in the background on each Solaris system. fmd receives telemetry information relating to problems detected by the
system software, diagnoses these problems, and initiates proactive self-healing activities such as disabling faulty components. When
appropriate, the fault manager also sends a message to the syslogd(1M) service to notify an administrator that a problem has been detected.
The message directs administrators to a knowledge article on Sun's web site, http://www.sun.com/msg/, which explains more about the problem
impact and appropriate responses.
Each problem diagnosed by the fault manager is assigned a Universal Unique Identifier (UUID). The UUID uniquely identifes this particular
problem across any set of systems. The fmdump(1M) utility can be used to view the list of problems diagnosed by the fault manager, along
with their UUIDs and knowledge article message identifiers. The fmadm(1M) utility can be used to view the resources on the system believed
to be faulty. The fmstat(1M) utility can be used to report statistics kept by the fault manager. The fault manager is started automatically
when Solaris boots, so it is not necessary to use the fmd command directly. Sun's web site explains more about what capabilities are cur-
rently available for the fault manager on Solaris.
OPTIONS
The following options are supported
-f file Read the specified configuration file prior to searching for any of the default fault manager configuration files.
-o opt=value Set the specified fault manager option to the specified value. Fault manager options are currently a Private inter-
face; see attributes(5) for information about Private interfaces.
-R dir Use the specified root directory for all pathnames evaluated by the fault manager, instead of the default root (/).
-V Print the fault manager's version to stdout and exit.
EXIT STATUS
The following exit values are returned:
0 Successful completion
1 An error occurred which prevented the fault manager from initializing, such as failure to open the telemetry trans-
port.
2 Invalid command-line options were specified.
FILES
/etc/fm/fmd Fault manager configuration directory
/usr/lib/fm/fmd Fault manager library directory
/var/fm/fmd Fault manager log directory
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWfmd |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), fmadm(1M), fmdump(1M), fmstat(1M), syslogd(1M), attributes(5), smf(5)
http://www.sun.com/msg/
NOTES
The Fault Manager is managed by the service management facility, smf(5), under the service identifier:
svc:/system/fmd:default
The service's status can be queried using the svcs(1) command. Administrators should not disable the Fault Manager service.
SunOS 5.10 17 Nov 2004 fmd(1M)