Sponsored Content
Operating Systems Solaris Where are my other disks on T5220 ? Post 302987882 by hicksd8 on Saturday 17th of December 2016 05:36:10 AM
Old 12-17-2016
Search for "sun storagetek common array manager" (for Solaris).

sent from my HTC smartphone

---------- Post updated at 10:36 AM ---------- Previous update was at 09:08 AM ----------

Okay, I'm now on my workstation so here's the detail..........

The raidctl command shows that you have an integrated LSI 1068E raid controller on your motherboard. That is what you would connect to if you pull out the Storagetek. The LSI supports RAID0, RAID1, and RAID1E. So it can't do RAID5.

Sun (Oracle) OEM'd the LSI 1068E chipset and the Storagetek RAID add-in card and you have BOTH of them.

The LSI is configured and controlled with the 'raidctl' command from Solaris but, again, you would need to configure any raid array to be used for the root filesystem by booting from DVD into single user. Then, the 'disk' is visible from the OS install routine.

For the Storagetek you need the package I told you to search for above which doesn't use raidctl (that's for the LSI) so don't get confused.

The Storagetek package you need to manage from Solaris may well also be on the CD that DN2 told you to download and burn. I'm not sure.

Hope that helps.
These 3 Users Gave Thanks to hicksd8 For This Post:
 

10 More Discussions You Might Find Interesting

1. Solaris

kstat on T5220

We used kstat on netra240/440 to check if the link is full duplex. So we do something like: bash-3.00# kstat -pc net bge:1::/'link_duplex'/ | cut -f2 2 The output 2 indicates the link is full duplex. This kind of check worked all right for Netra 240/440 systems. However, the nxge... (2 Replies)
Discussion started by: illcar
2 Replies

2. Solaris

ILOM and sc on T5220

I 've 2 different T5220 and both are showing different prompts when i ssh to the console. 1. Shows sc> ALOM 2. Shows -> ILOM as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ? and i found that we... (6 Replies)
Discussion started by: fugitive
6 Replies

3. Solaris

SC on T5220 not responding

Hi, SC on one of my T5220 is not responding .. it does not show not let me type anything .. what could be the reason for it ? though when i powercycle the box from sc it shows me the system coming up but after that does not let me login thru sc sc> console -f Enter #. to return to ALOM. (2 Replies)
Discussion started by: fugitive
2 Replies

4. Solaris

LDOMs on T5220

We're just about to migrate a large application from an Enterprise 6900 to a pair of T5220s utilising LDOMs. Does anyone have any experience of LDOMs on this kit and can provide any recommendations or pitfalls to avoid? I've heard that use of LDOMs can have an impact on I/O speeds as it's all... (9 Replies)
Discussion started by: JerryHone
9 Replies

5. Solaris

T5220 server

Hi, We have two T5220 servers in our datacentre one server is showing 64 processors online and another showing 32 processors online two are newly purchased, there is no hardware faults in this server one server has 64gb memory and it shows 64 processors, and other having 32gb memory and it... (5 Replies)
Discussion started by: rajasekg
5 Replies

6. Solaris

Set up new T5220 remotely

I have a new T5220 racked at our remote office and the guys who racked it does not know how to configure the SP on the system .. is there any way i can do it remotely ? (1 Reply)
Discussion started by: fugitive
1 Replies

7. Solaris

Jumpstart Issues With T5220

I'm trying to use a V210 (sun4u) configured as a jumpstart server to flash install a number of T5220's (sunv4). The Facts: V210 - Solaris 10 (September 2010 Release / not patched) T5220's - Archive's created using prior (unknown) version of solaris 10. Flar -i <archive name> shows the... (6 Replies)
Discussion started by: Celtic_Monkey
6 Replies

8. Solaris

T5220

Hi Guys and Gals, Wondering if anyone could help me, tricky one this. Got a T5220 with a graphics card. When you power it on, it outputs its output to the screen and you can type commands with the keyboard etc. But no matter what version of Solaris 10 you use, when you do a boot cdrom... (1 Reply)
Discussion started by: callmebob
1 Replies

9. Solaris

T5220

Hello guys, can anyone give me some advice on how to perform clean installation of Solaris 10 on T5220 ? I am connected with serial management port on the machine, i have the ok promt and now i should eject the dvdrom to insert Solaris dvd into and start the clean install. So how to do that... (3 Replies)
Discussion started by: tonijel
3 Replies

10. Solaris

Storage issue on T5220

We have one box T5220 which was assigned 2x100G Luns but i have a strange problem if i use powermt display it only shows me one card but cfgadm, fcinfo commands shows 2 dual port cards as up. What could be the reason for it. I already did a re-configure reboot but that didn't help. Can anyone help... (1 Reply)
Discussion started by: fugitive
1 Replies
MFI(4)							   BSD Kernel Interfaces Manual 						    MFI(4)

NAME
mfi -- LSI MegaRAID SAS driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device pci device mfi Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): mfi_load="YES" DESCRIPTION
This driver is for LSI's next generation PCI Express SAS RAID controllers. Access to RAID arrays (logical disks) from this driver is pro- vided via /dev/mfid? device nodes. A simple management interface is also provided on a per-controller basis via the /dev/mfi? device node. The mfi name is derived from the phrase "MegaRAID Firmware Interface", which is substantially different than the old "MegaRAID" interface and thus requires a new driver. Older SCSI and SATA MegaRAID cards are supported by amr(4) and will not work with this driver. Two sysctls are provided to tune the mfi driver's behavior when a request is made to remove a mounted volume. By default the driver will disallow any requests to remove a mounted volume. If the sysctl dev.mfi.%d.delete_busy_volumes is set to 1, then the driver will allow mounted volumes to be removed. HARDWARE
The mfi driver supports the following hardware: o LSI MegaRAID SAS 1078 o LSI MegaRAID SAS 8408E o LSI MegaRAID SAS 8480E o LSI MegaRAID SAS 9260 o Dell PERC5 o Dell PERC6 o IBM ServeRAID M5015 SAS/SATA o IBM ServeRAID-MR10i o Intel RAID Controller SROMBSAS18E FILES
/dev/mfid? array/logical disk interface /dev/mfi? management interface DIAGNOSTICS
mfid%d: Unable to delete busy device An attempt was made to remove a mounted volume. SEE ALSO
amr(4), pci(4), mfiutil(8) HISTORY
The mfi driver first appeared in FreeBSD 6.1. AUTHORS
The mfi driver and this manual page were written by Scott Long <scottl@FreeBSD.org>. BUGS
The driver does not support big-endian architectures at this time. BSD
May 12, 2010 BSD
All times are GMT -4. The time now is 09:07 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy