Network Connections Post: 302987526

8 More Discussions You Might Find Interesting

1. HP-UX

HP-UX: X connections...?

Hello All, I have 2 qries about X connections on HP-UX : 1.How/where to determine whether "X connections" to the server are controlled. 2. How/where to determine whether "X11 connection" are tunnelled via ssh. 3. How/where to determine the "Time in minutes before unattended X terminals...

2. Linux

active network connections

how can i see active network connections

3. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no...

4. IP Networking

Logging network connections

Hello, I have a centralized syslog server, and am wondering if there is a way to log all network connections to it (Primarily incoming, such as FTP, httpd, SSH, etc). Essentially what I would like is to get the information seen in netstat or lsof logged line by line, realtime. Is there a...

5. IP Networking

preferred network connections

I rotate between a static lan, dhcp lan, and various wireless networks daily. Is there a way to set preferred network connections? I use some static ip's daily, some static ip's like once a month, and almost never use the dhcp lan. The same I do with my various wireless networks. Some I use daily...

6. IP Networking

2 WAN connections on 1 switch/network

I want to know potential problems with the following scenario OR if it is an ok way to have my network setup: I have 2 WAN connections to the internet. I have each WAN connection plugged into its own router. Router DD-WRT is gateway for servers (192.0.10.50). Router Tomato is gateway for pc's...

7. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and...

8. Shell Programming and Scripting

Could you help me writing a script showing which network connections are currently active?

Could you help me writing a script showing which network connections are currently active? Means output should be something like: "eth0, wlan1, wlan3" Problem: The output is supposed to happen on a 16x2 LCD Display. Currently I am doing a "Ifconfig" as output, but its too fast for the...

LEARN ABOUT DEBIAN

rlm_ippool_tool

RLM_IPPOOL_TOOL(8)					      System Manager's Manual						RLM_IPPOOL_TOOL(8)

NAME

       rlm_ippool_tool - dump the contents of the FreeRadius ippool database files

SYNOPSIS

       If an ipaddress is specified then that address is used to limit the actions or output.

       rlm_ippool_tool [-a] [-c] [-o] [-v] session-db index-db [ipaddress]

       Mark the entry nasIP/nasPort as having ipaddress

       rlm_ippool_tool -n session-db index-db ipaddress nasIP nasPort

       Update old format database to new.

       rlm_ippool_tool -u session-db new-session-db

DESCRIPTION

       rlm_ippool_tool dumps the contents of the FreeRADIUS ippool databases for analyses or for removal of active (stuck?) entries.

       Or with the -n argument adds a usage entry to the FreeRADIUS ippool databases.

OPTIONS

       -a     Print all active entries.

       -c     Report number of active entries.

       -r     Remove active entries.

       -v     Verbose report of all entries.

       -o     Assume old database format (nas/port pair, not md5 output).

       -n     Mark the entry nasIP/nasPort as having ipaddress.

       -u     Update old format database to new.

EXAMPLES

       Given the syntax in the FreeRadius radiusd.conf:

	       ippool myippool {
		   range-start = 192.168.1.0
		   range-stop = 192.168.1.255
		   [...]
		   session-db = ${raddbdir}/ip-pool.db
		   ip-index = ${raddbdir}/ip-index.db
	       }

       To see the number of active entries in this pool, use:

	       $ rlm_ippool_tool -c ip-pool.db ip-index.db
	       13

       To see all active entries in this pool, use:

	       $ rlm_ippool_tool -a ip-pool.db ip-index.db
	       192.168.1.5
	       192.168.1.82
	       192.168.1.244
	       192.168.1.57
	       192.168.1.120
	       192.168.1.27
	       [...]

       To see all information about the active entries in the use, use:

	       $ rlm_ippool_tool -av ip-pool.db ip-index.db
	       NAS:172.16.1.1 port:0x2e8 - ipaddr:192.168.1.5 active:1 cli:0 num:1
	       NAS:172.16.1.1 port:0x17c - ipaddr:192.168.1.82 active:1 cli:0 num:1
	       NAS:172.16.1.1 port:0x106 - ipaddr:192.168.1.244 active:1 cli:0 num:1
	       NAS:172.16.1.1 port:0x157 - ipaddr:192.168.1.57 active:1 cli:0 num:1
	       NAS:172.16.1.1 port:0x2d8 - ipaddr:192.168.1.120 active:1 cli:0 num:1
	       NAS:172.16.1.1 port:0x162 - ipaddr:192.168.1.27 active:1 cli:0 num:1
	       [...]

       To see only information of one entry, use:

	       $ rlm_ippool_tool -v ip-pool.db ip-index.db 192.168.1.1
	       NAS:172.16.1.1 port:0x90 - ipaddr:192.168.1.1 active:0 cli:0 num:0

       To add an IP address usage entry, use:

	       $ rlm_ippool_tool -n ip-pool.db ip-index.db 192.168.1.1 172.16.1.1 0x90
	       rlm_ippool_tool: Allocating ip to nas/port: 172.16.1.1/144
	       rlm_ippool_tool: num: 1
	       rlm_ippool_tool: Allocated ip 192.168.1.1 to client on nas 172.16.1.1,port 144

SEE ALSO

       radiusd(8)

AUTHORS

       Currently   part   of   the   FreeRADIUS   Project   (http://www.freeradius.org)   Originally   by   Edwin   Groothuis,	 edwin@mavetju.org
       (http://www.mavetju.org)

       Mailing list details are at http://www.freeradius.org/

																RLM_IPPOOL_TOOL(8)