Sponsored Content
Full Discussion: Help with ping6
Top Forums UNIX for Advanced & Expert Users Help with ping6 Post 302987500 by Meow613 on Saturday 10th of December 2016 11:34:03 PM
Old 12-11-2016
Aia -

Sorry for the delay -

Here is the reply:

Code:
root@server1:/home/server1# ping6 ::1
connect: Network is unreachable

---------- Post updated at 11:34 PM ---------- Previous update was at 11:21 PM ----------

Aia -

Sorry.

Did not make the proper edits.

Here it is again:
Code:
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.040 ms
64 bytes from ::1: icmp_seq=2 ttl=64 time=0.070 ms
64 bytes from ::1: icmp_seq=3 ttl=64 time=0.085 ms
64 bytes from ::1: icmp_seq=4 ttl=64 time=0.077 ms
64 bytes from ::1: icmp_seq=5 ttl=64 time=0.086 ms
^C
--- ::1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.040/0.071/0.086/0.019 ms

root@server1:/home/server1# ping6  ::ffff:2f15:9a92
PING ::ffff:2f15:9a92(::ffff:47.21.154.146) 56 data bytes
ping: sendmsg: Network is unreachable
ping: sendmsg: Network is unreachable

Code:
::ffff:2f15:9a92

is my iIPv6 address.


meow613

Last edited by Meow613; 12-11-2016 at 02:11 PM..
 

We Also Found This Discussion For You

1. UNIX for Beginners Questions & Answers

Help with ping6

Please help me with the inability to use ping6 root@server1:/home/server1# ifconfig eth0 Link encap:Ethernet HWaddr 00:23:ae:27:b9:ec UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0... (1 Reply)
Discussion started by: Meow613
1 Replies
Simple action in tc(8)                                                 Linux                                                Simple action in tc(8)

NAME
simple - basic example action SYNOPSIS
tc ... action simple [ sdata STRING ] [ index INDEX ] [ CONTROL ] CONTROL := { reclassify | pipe | drop | continue | ok } DESCRIPTION
This is a pedagogical example rather than an actually useful action. Upon every access, it prints the given STRING which may be of arbi- trary length. OPTIONS
sdata STRING The actual string to print. index INDEX Optional action index value. CONTROL Indicate how tc should proceed after executing the action. For a description of the possible CONTROL values, see tc-actions(8). EXAMPLES
The following example makes the kernel yell "Incoming ICMP!" every time it sees an incoming ICMP on eth0. Steps are: 1) Add an ingress qdisc point to eth0 2) Start a chain on ingress of eth0 that first matches ICMP then invokes the simple action to shout. 3) display stats and show that no packet has been seen by the action 4) Send one ping packet to google (expect to receive a response back) 5) grep the logs to see the logged message 6) display stats again and observe increment by 1 hadi@noma1:$ tc qdisc add dev eth0 ingress hadi@noma1:$tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip protocol 1 0xff flowid 1:1 action simple sdata "Incoming ICMP" hadi@noma1:$ sudo tc -s filter ls dev eth0 parent ffff: filter protocol ip pref 5 u32 filter protocol ip pref 5 u32 fh 800: ht divisor 1 filter protocol ip pref 5 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 match 00010000/00ff0000 at 8 action order 1: Simple <Incoming ICMP> index 4 ref 1 bind 1 installed 29 sec used 29 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 hadi@noma1$ ping -c 1 www.google.ca PING www.google.ca (74.125.225.120) 56(84) bytes of data. 64 bytes from ord08s08-in-f24.1e100.net (74.125.225.120): icmp_req=1 ttl=53 time=31.3 ms --- www.google.ca ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 31.316/31.316/31.316/0.000 ms hadi@noma1$ dmesg | grep simple [135354.473951] simple: Incoming ICMP_1 hadi@noma1$ sudo tc/tc -s filter ls dev eth0 parent ffff: filter protocol ip pref 5 u32 filter protocol ip pref 5 u32 fh 800: ht divisor 1 filter protocol ip pref 5 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1 match 00010000/00ff0000 at 8 action order 1: Simple <Incoming ICMP> index 4 ref 1 bind 1 installed 206 sec used 67 sec Action statistics: Sent 84 bytes 1 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 SEE ALSO
tc(8) tc-actions(8) iproute2 12 Jan 2015 Simple action in tc(8)
All times are GMT -4. The time now is 06:23 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy