Agent missing in zone after patching Post: 302985419

9 More Discussions You Might Find Interesting

1. Solaris

Patching zone

Hi everyone, I have a container which includes 5 zones. I would like to patch only 2 of them with the latest recommended patch bundle. 1) Could it be done by installing Recommended Patch Cluster on those 2 zones? And after rebooting them? 2) May patching only those 2 zones affect the...

2. Solaris

Zone failes to boot due to mount issue, dir exists in zone.

I have two physical servers, with zones that mount local storage. We were using "raw device" in the zonecfg to point to a metadevice on the global zone (it was not mounted in the global zone at any point). It failed to mount on every boot because the directory existed in the zone. I...

3. Solaris

patching a zone.

what are prerequisites or precautions we take before we install a patch in a zone.what if zone fails to boot after patching.How to recover form this situation.? Thanks in advance..:)

4. Solaris

Help needed for patching on zone cluster

Hi All, Below is the configuration of my sun cluster. root@glob-one # clzc status === Zone Clusters === --- Zone Cluster Status --- Name Node Name Zone HostName Status Zone Status ---- --------- ------------- ------ ----------- data ...

5. Solaris

showing 2 different time zones in global zone and nonglobal zone

can some one help me out as it is showing 2 different time zones in global zone and nonglobal zone .In global zone it is showing in GMT while in nonglobal zone i it showing as PDT. System in running with solaris 10

6. UNIX for Advanced & Expert Users

Solaris 10: I forgot to detach a zone before zpool export. Uninstall zone?

Dear all, recently, I migrated a solaris zone from one host to another. The zone was inside of a zpool. The zpool cotains two volumes. I did the following: host1: $ zlogin zone1 shutdown -y -g0 -i0 #Zone status changes from running to installed $ zpool export zone1 host2: $ zpool...

7. Solaris

Patching Procedure in Solaris 10 with sun cluster having Solaris zone

Hi Gurus I am not able to find the patching procedure for solaris 10 ( sol10 u11) to latest patchset with sun cluster having failover zones so that same I should follow. Take an instance, there are sol1 and sol2 nodes and having two failover zones like sozone1-rg and sozone2-rg and currently...

8. Solaris

Solaris 11 Global zone patching having Solaris 10 branded zone

I am planning to do solaris 11 global zone patching having solaris 10 branded zone. I have a doubts on step 8 specially Can someone clear my step 8 doubts or if anything wrong between step 1 to step 9 please correct that also as I have pretty good idea about Step 10 mean patching in solaris 10...

9. Solaris

Solaris 11 zone has no external network access (except to Global Zone)

Hi, hoping someone can help, its been a while since I used Solaris. After creating a NGZ (non global zone), the NGZ can access the GZ (Global Zone) and the GZ can access the NGZ (using ssh, zlogin) However, the NGZ cannot access any other netwqork devices, it can't even see the default router ...

LEARN ABOUT CENTOS

pmdavmware

PMDAVMWARE(1)						       Performance Co-Pilot						     PMDAVMWARE(1)

NAME

       pmdavmware - VMware performance metrics domain agent (PMDA)

DESCRIPTION

       pmdavmware is a Performance Metrics Domain Agent (PMDA) which exports metric values from a (possibly remote) VMware virtualisation host.

       This implementation uses the VMare Perl API (refer to the online docs at http://www.vmware.com/support/developer/viperltoolkit).  VIPerl is
       a prerequisite for this PMDA, it needs to be installed and configured before attempting to use this agent.  It is highly recommended that
       you test your VIPerl installation using the demo programs that are shipped with VIPerl, before attempting to use this PMDA.

INSTALLATION

       In order to access performance data using the VIPerl API, it is necessary to be able to login to the metrics source.  Hence, a valid VMware
       server name, user name and pass word are needed by the PMDA.  These can be passed in on the command line (via the pmcd.conf file) or via a
       vmware.conf file in the PMDA directory.

	       # cd $PCP_PMDAS_DIR/vmware
	       # [ edit vmware.conf ]

       This file should contain three lines, such as:

	       $server = 'vm.server.net';
	       $username = 'XXXX';
	       $password  = 'YYYY';

       Once this is setup, you can access the names and values for the vmware performance metrics by doing the following as root:

	       # cd $PCP_PMDAS_DIR/vmware
	       # ./Install

       If you want to undo the installation, do the following as root:

	       # cd $PCP_PMDAS_DIR/vmware
	       # ./Remove

       pmdavmware is launched by pmcd(1) and should never be executed directly.  The Install and Remove scripts notify pmcd(1) when the agent is
       installed or removed.

FILES

       $PCP_PMDAS_DIR/vmware/vmware.conf
	   configuration file for the pmdavmware agent

       $PCP_PMDAS_DIR/vmware/Install
	   installation script for the pmdavmware agent

       $PCP_PMDAS_DIR/vmware/Remove
	   undo installation script for the pmdavmware agent

       $PCP_LOG_DIR/pmcd/vmware.log
	   default log file for error messages from pmdavmware

SEE ALSO

       pmcd(1).

3.8.10							       Performance Co-Pilot						     PMDAVMWARE(1)