I thought about proposing using the stty utility as well but wasn't sure if it would work/apply, as we are dealing with a USB GPIO device.
Using stty might or might not work, but it is really easy to find out...
If the command stty < /dev/ttyACM0 works (printing the current settings for the device), it will work. If it exits with a non-zero exit status and prints a diagnostic similar to:
then it won't work.
hi. Im trying to install a switch.
And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection.
However.. nothing about how to find this info.
Could anyone help me where to find this path?
thx
mr.T (6 Replies)
Hey!
I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk.
If i run cat /proc/bus/usb/devices
I get this information:
T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00... (2 Replies)
Hello!
I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a... (5 Replies)
I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data.
It get only some data. What should I do to get altogether of data?
If all of... (7 Replies)
I am using the while-loop to read a file.
The file has lines with null-terminated strings (words, actually.)
What I have by that reading - just a first word up to '\0'!
I need to have whole string up to 'new line' - (LF, 10#10, 16#A)
What I am doing wrong?
#make file 'grb' with... (6 Replies)
I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014:
lpstat -s
device for check3: /dev/ttyr002
device for check4: /dev/ttyr002
I changed the tty setting for check3 in:
/etc/printcap
/var/spool/lp/admins/lp/printers/check3
to /dev/ttyr014
Then I get:... (4 Replies)
I have a script batch_vmdgenpqr.sh which has a problem:
#!/bin/bash
while read line
do
vmd.sh -dispdev text -e vmdgenpqr.tcl -args $line
done<file
The do line calls another program, VMD (called by vmd.sh) and it requires the values from $line, but this is not recognised by... (3 Replies)
Hi All,
Am trying to write wrapper shell/bash script on a utility tool for which i need to pass 2 files as arugment to execute utility tool.
Wraper script am trying is to do with above metion 2 files.
utility tool accepts :
a. userinfo file : which contains username
b. item file : which... (2 Replies)
Heyas
I'm trying to read/display a file its content and put borders around it (tui-cat / tui-cat -t(ypwriter).
The typewriter-part is a 'bonus' but still has its own flaws, but thats for later.
So in some way, i'm trying to rewrite cat using bash and other commands.
But sadly it fails on... (2 Replies)
Hello,
I'm works on Ubuntu server
My goal : I would like to read file line per line, but i want to started at the end of file.
Currently, I use instructions :
while read line;
do
COMMAND
done < /var/log/apache2/access.log
But, the first line, i don't want this. The file is long... (5 Replies)
Discussion started by: Fuziion
5 Replies
LEARN ABOUT FREEBSD
sicontrol
SICONTROL(8) BSD System Manager's Manual SICONTROL(8)NAME
sicontrol -- Specialix SI/XIO driver configuration and debugging
SYNOPSIS
sicontrol device command [param ...]
DESCRIPTION
The sicontrol utility is used to configure and monitor the SI/XIO device driver.
The sicontrol utility operates on the specified device to indicate which port is to be used.
The special device string `-' is used to indicate the global driver settings instead.
A /dev/ is included if necessary.
The following commands are used for the global settings and should be specified with the '-' device name:
int_throttle [value]
Configure the `aggregate interrupt throttle value'. The maximum number of host adapter interrupts per second is determined by:
controller CPU clock / (8 * int_throttle)
The default value at boot time is 25000. The host adapter cpu clock is 25MHz. This gives a maximum interrupt rate of about 125 inter-
rupts per second.
Lowering this value will increase the rate in which the host adapter can interrupt the operating system for attention.
rxint_throttle [value]
Configure the receiver interrupt throttle value. The default value of 4 at boot time allows an interrupt rate of approximately 25.
Lowering this value will increase the rate in which the host adapter can interrupt the operating system to empty the receiver fifos.
nport
Return the number of ports under the control of the device driver.
The following commands are used for the individual ports and should be specified with a device name from /dev:
mstate
Show the current incoming modem control signals.
ccbstat
Show the current "ccb" structure for the specified port. This is not of much use outside of debugging the driver and determining why a
port is wedged.
FILES
/dev/si_control global driver control file for use by sicontrol
/dev/ttyA* terminal control ports
/dev/ttyiA* initial termios state devices, for use by stty(1)
/dev/ttylA* locked termios state devices, for use by stty(1)DIAGNOSTICS
Generally self explanatory.....
SEE ALSO stty(1), si(4), termios(4), tty(4), comcontrol(8)HISTORY
The sicontrol utility is loosely based on a utility called siconfig which was written by Andy Rutter <andy@acronym.co.uk>.
Specialix International do not support this device driver in any way.
AUTHORS
Peter Wemm <peter@FreeBSD.org>
BUGS
Bound to be many... :-)
BSD September 26, 1995 BSD