Can not recognize network adapter SCO UNIX in HP z400 Post: 302984839

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

SCO Unix and Two Network Cards

Our shops server runs SCO Openserver 5 release 5. It has two network cards in it (one on 10.0.0.6 and one on 90.0.0.99). When I run scoadmin and look at the network settings it show both my 3com network cards and a loop back driver http://theentertainer.com/james/untitled.jpg Can anyone tell...

2. SCO

Sco Unix network issues

I have got a Sco Unix Server, i want to connect some windows workstations. What configurations do i need to make on server and or workstation?

3. AIX

hacmp network adapter re-define

I have an LPAR in a P5 machine which has been setup in an HACMP cluster. The person who set it up allocated the wrong network adapter (en) to the persistent network. For the life of me I cannot find where I can re-assign this adapter. Anyone able to help me as I am tearing my hair out and do not...

4. SCO

SCO Unix Network Configuration

Hello Guys, We have an old PC running on SCO Unix V. Is there any sites where i can get manual/procedures on how to install and configure Network. Thanks

5. AIX

change network adapter

hello i've need to change network adapter on machine H80 aix 4.3.3 hacmp ( ent0 ) what i need to do after the new adapter installed on the machine? thanks best regards ariec

6. AIX

How to active this network adapter?

When I configure two VIO Servers, VIOS1 used to ping its gateway, after I configured second VIOS2, VIOS1 cannpt ping its gateway, when I run this command: entstat -all ent#|grep -i priority Priority: 5 Active: False How to make Active to True?

7. UNIX for Dummies Questions & Answers

External Network Adapter for Solaris 10

Hi All, I am new here - this is my first post. I have installed Solaris 10 5/09 on my Dell M6300. The install went well, but the Dell's onboard network card is the Broadcom BCM5756ME Gigabit Ethernet - and sadly no Solaris driver exists for it. The Solaris 10 install just jumped by the...

8. UNIX for Dummies Questions & Answers

SCO Unixware 7.1.4 Network Adapter Error

Hi All I P2Vd a Unixware 7.1.4 box with VMWare Vsphere. I try to add a network adapter under Network Configuration Manager and it comes up with the error attached. I've added a virtual adapter using the "E1000" option. It detects both the AMD PCI NET and E1000 virtual adapters under Network...

9. SCO

Configuare Network SCO UNIX 5.0.7 on Vmware

hi i installed sco unix open server 5.0.7 on virtual machine vmware and runing it, its work perfect and good. now how i can configuare network at scoadmin that i able to access nework ? ---------- Post updated at 08:56 AM ---------- Previous update was at 01:47 AM ---------- nobody can...

10. Red Hat

Red Hat 7 cannot recognize ethernet adapter

Hello community, I have a Proliant HP DL380P with the following network adapters: NetXtreme BCM5719 Gigabit Ethernet PCIe (Ethernet 1Gb 4-port 331FLR Adapter) 82580 Gigabit Network Connection (NC365T 4-port Ethernet Server Adapter) I installed Red Hat 7.2 but it recognizes only the...

LEARN ABOUT CENTOS

capiinit

capiinit(8)						      System Manager's Manual						       capiinit(8)

NAME

       capiinit - start or stop CAPI-capable ISDN cards

SYNOPSIS

       capiinit [OPTIONS] start | stop | show | status | prepare | reload | activate | deactivate

       capiinit [OPTIONS] activate|deactivate  cardname

       capiinit [OPTIONS] activate|deactivate  driver [cardname]

DESCRIPTION

       capiinit is called with one of the following actions:

       start  Load all modules and initialize all cards (loading the firmware), which are configured in /etc/isdn/capi.conf.

       stop   Reset all cards and unload modules.

       show   Show the current configuration.

       status Show the current status.

       prepare
	      Load all modules.

       activate
	      Initialize all cards.

       activate cardname
	      Initialize one card (i.e.: c4-ec00).

       activate driver [cardnumber]
	      Initialize one card.

       deactivate
	      Reset all cards.

       deactivate cardname
	      Reset one card (i.e.: c4-ec00).

       deactivate driver [cardnumber]
	      Reset one card.

       reload Reset all cards and initialize them again.

       Firmware  files	are  searched  in  this  order	in  the following directories: /usr/share/isdn/`uname -r`, /usr/share/isdn, /usr/lib/isdn,
       /lib/isdn.

       There is a sample config in /etc/isdn/capi.conf.

OPTIONS

       -c filename, --config filename
	      Use filename as config file (default is /etc/isdn/capi.conf).

       -d, --debug
	      Save patch values for debugging purposes.

       -s, --silent
	      Don't show status information.

AUTHOR

       Manpage written from C source by Paul Slootman <paul@debian.org>, updated by Matthias Klose <m@klose.in-berlin.de>.

																       capiinit(8)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

SCO Unix and Two Network Cards

Discussion started by: potter

2. SCO

Sco Unix network issues

Discussion started by: tpurazi1

3. AIX

hacmp network adapter re-define

Discussion started by: johnf

4. SCO

SCO Unix Network Configuration

Discussion started by: nrcuevas