I repeat: On what directories are these two two disks mounted?
If the filesystems on those disks have not been mounted, you will not be able to use ls to list the files on those disks. If you have mounted them, you can use:
to get a long listing showing all of the files on that disk (assuming that the disk is mounted on the directory /mountdir and on all filesystems mounted on directories located in that filesystem, recursively. The command:
will list all of the files on every filesystem that is currently mounted.
The command:
with no operands (only the options you have shown), will give you a long listing of all files in your current working directory.
This User Gave Thanks to Don Cragun For This Post:
Will some one tell me what this means.
"warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20."
I'm running SCO 505 on a proliant 1600r.
Thnank you in advance. (3 Replies)
Hello,
Running a Sun Solaris 9 E250 and need advice or suggestions on what type of external hard disks are compatible and or available. It's an old machine and is due for replacement soon but in the short term need an external hard drive for backup etc as the partner/backup machine has just... (2 Replies)
I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives... (2 Replies)
Version: solaris 10 x86
I just got a western digital external harddrive formated with fat 32. this drive came with some setup files which is meant for windows or mac.
I want to reformat and partition this drive into two ( for solaris and windows) such that the setup files will still be there... (2 Replies)
Folks;
I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version.
Is there a command i can use to add the new space or even see if the system can sees them? (3 Replies)
I need to add two new hard drives of 300 GB capacity to a SunSPARC T5440 server. The server currently has two hard drives of 146 GB each.
How do I add the new drives to the existing UFS?
What are the procedures involved in setting this server with the new hard drives? I am very new to Solaris... (6 Replies)
I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot... (7 Replies)
Hello everyone. I have a question which I may know the answer to, I'm just looking for a confirmation. When it comes to the MBR of a hard drive, i've read in multiple sources that it's always located in the first sector of the hard drive. Is the MBR there from the factory? When I buy a new blank... (3 Replies)
I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode.
I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management.
Tinkering around I... (4 Replies)
Ok so i thought i was smart but i can tell I need some help. I am playing around with understanding lvm and adding disks to a linux box. I added a disk and then ran what i thought were commands to add this disk to the box but I think I messed up and would like some help. My question is did i... (5 Replies)
Discussion started by: cptkirkh
5 Replies
LEARN ABOUT SUSE
xfs_freeze
xfs_freeze(8) System Manager's Manual xfs_freeze(8)NAME
xfs_freeze - suspend access to an XFS filesystem
SYNOPSIS
xfs_freeze -f | -u mount-point
DESCRIPTION
xfs_freeze suspends and resumes access to an XFS filesystem (see xfs(5)).
xfs_freeze halts new access to the filesystem and creates a stable image on disk. xfs_freeze is intended to be used with volume managers
and hardware RAID devices that support the creation of snapshots.
The mount-point argument is the pathname of the directory where the filesystem is mounted. The filesystem must be mounted to be frozen
(see mount(8)).
The -f flag requests the specified XFS filesystem to be frozen from new modifications. When this is selected, all ongoing transactions in
the filesystem are allowed to complete, new write system calls are halted, other calls which modify the filesystem are halted, and all
dirty data, metadata, and log information are written to disk. Any process attempting to write to the frozen filesystem will block waiting
for the filesystem to be unfrozen.
Note that even after freezing, the on-disk filesystem can contain information on files that are still in the process of unlinking. These
files will not be unlinked until the filesystem is unfrozen or a clean mount of the snapshot is complete.
The -u flag is used to un-freeze the filesystem and allow operations to continue. Any filesystem modifications that were blocked by the
freeze are unblocked and allowed to complete.
One of -f or -u must be supplied to xfs_freeze.
NOTES
A copy of a frozen XFS filesystem will usually have the same universally unique identifier (UUID) as the original, and thus may be pre-
vented from being mounted. The XFS nouuid mount option can be used to circumvent this issue.
In Linux kernel version 2.6.29, the interface which XFS uses to freeze and unfreeze was elevated to the VFS, so that this tool can now be
used on many other Linux filesystems.
SEE ALSO xfs(5), lvm(8), mount(8).
xfs_freeze(8)