Google for the error message (in quotes) and HP-UX. It yields this link i.e. run the suggested command
and hopefully it will rebuild /etc/pty/ and /etc/pty*.
This User Gave Thanks to MadeInGermany For This Post:
Hi,
Currently, we are doing make recovery in our servers but dds tape drive of 1 of our servers is not working. I suppose to use external dds tape drive but the problem is that there is no slot from the server for the scsi type external dds device. Is it possible to use drives from other... (5 Replies)
Hello All,
I need to bring down our old 9000 series d350, but my supervisor wants an ignite backup created. I cannot find ignite in the usual places (/opt/ignite) nor can I find it in swlist. As far as I can tell the cd's are long gone.
Is there anywhere else I could look for ignite being... (6 Replies)
Hi All,
I am getting below error while igniting(restoring image) on 2470 server. i tried with different images it is giving same error. please help me out to resolve this issue
* Making VxFS filesystem for "/usr/aethos/snss/suppimpapp1",
(/dev/vg00/rsuppimpapp1).
*... (3 Replies)
I am looking to make bootable tape backups of four machines running HP-UX 09.02, 09.05 and 09.07.
I successfully located Ignite 10.20 and installed it and made a backup on the one machine running HP-UX 10.20. I am having trouble locating information about Ignite for HP-UX 9. Does it exist? Is... (3 Replies)
I've read the Ignite User/Admin Guide but I'm having trouble figuring out if I can do a make_net_recovery if the ignite server and client server are on completely different networks? If this can be done is there any special configuration? If I initiate the command from the server it looks like it... (3 Replies)
Works all.
Depot shared via nfs
dhcp working
setting file system,network,root password,etc
But when i start "go!" with installation,give me
this error.
How to fix,debug?
Thanks
http://s24.postimg.org/5hzbgk551/unixbell3.png (3 Replies)
Hi
Does anybody know how to get hold of a very old (A.3.7.n) copy of the ignite software depot for HP-UX 10.20? (7 Replies)
Discussion started by: gregsih
7 Replies
LEARN ABOUT LINUX
ttysnoop
TTYSNOOP(8) BSD System Manager's Manual TTYSNOOP(8)NAME
ttysnoop -- snoop on a user's tty
SYNOPSIS
ttysnoop [pty]
ttysnoops
DESCRIPTION
The ttysnoop / ttysnoops client-server combo can be used to snoop (watch) on a user's login tty. The server (ttysnoops) is usually started
by getty(8) or telnetd(8) and reads the file /etc/snooptab to find out which tty's should be cloned and which programs to run on them (usu-
ally /bin/login). A tty may be snooped through a pre-determined (ie. fixed) device, or through a dynamically allocated pseudo-tty (pty).
This is also specified in the /etc/snooptab file. To connect to the pty, the client ttysnoop should be used. The available pseudo terminals
pty are present as sockets in the directory /var/spool/ttysnoop/.
Format of /etc/snooptab
The /etc/snooptab file may contain comment lines (starting with a '#'), empty lines, or entries for tty's that should be snooped upon. The
format of such an entry is as follows:
tty snoop-device type program
where tty is the leaf-name of the tty that should be snooped upon (eg. ttyS2, not /dev/ttyS2) OR the wildcard '*', which matches ANY tty.
snoop-device is the device through which tty should be snooped (eg. /dev/tty8) OR the literal constant "socket". The latter is used to tell
ttysnoops that the snoop-device will be a dynamically allocated pty. type specifies the type of program that should be run, currently recog-
nized types are "init", "user" and "login" although the former two aren't really needed. Finally, program is the full pathname to the program
to run when ttysnoops has cloned tty onto snoop-device.
EXAMPLE
The following example /etc/snooptab file should illustrate the typical use of ttysnoop / ttysnoops:
#
# example /etc/snooptab
#
ttyS0 /dev/tty7 login /bin/login
ttyS1 /dev/tty8 login /bin/login
#
# the wildcard tty should always be the last one in the file
#
* socket login /bin/login
#
# example end
#
With the above example, whenever a user logs in on /dev/ttyS0 or /dev/ttyS1, either tty will be snooped through /dev/tty7 or /dev/tty8
respectively. Any other tty's will be snooped through a pty that will be allocated at the time of login. The system-administrator can then
run ttysnoop pty to snoop through the pty. Note that it is up to the system-administrator to setup getty and/or telnetd so that they execute
ttysnoops instead of /bin/login.
SEE ALSO getty(8), telnetd(8)FILES
/etc/snooptab
BUGS
The program is unable to do any terminal control-code translations for the original tty and the snoop-device. I doubt it will ever do this.
AUTHOR
Carl Declerck, carl@miskatonic.inbe.net
BSD August 8 1994 BSD