10-14-2016
Hi
vg01 is the group that, at one time, contained the missing disk.
This is shown by the fact that vgdisplay -v vg01 shows the error detailed above.
An ioscan for disks does not show the 'missing' disk.
10 More Discussions You Might Find Interesting
1. HP-UX
can any1 tell me how to make ignite tapes for the HP-ux.
this company said it was: "make_tape_recovery_A", but that don't work. (4 Replies)
Discussion started by: JBX
4 Replies
2. UNIX for Advanced & Expert Users
system:
HP-UX 10.20 with HFS mounted.
How can I convert the HFS to VxFS without an ignite server ?
Is this possible ?
thanks
simon2000 (4 Replies)
Discussion started by: simon2000
4 Replies
3. HP-UX
could any one help me
I have a HP UX 11.0 with a lot of VG and disks connected to SAN. I need to create a Golden Image having only the vg00 of this system. How do i do this using make_sys_image?
In case any have some docs, I would appreciate if You could share it.
Thanks
Dhanish (5 Replies)
Discussion started by: i2admin
5 Replies
4. HP-UX
Sorry if this has been asked and answered, but I can't find this particual problem. I've had an Ignite server running for years on a small internal network with images we load on daily basis. Tried to load two servers, L2000 and C3600 , both with same problem.
# boot lan.192.168.2.2 install
... (0 Replies)
Discussion started by: ddeblance
0 Replies
5. HP-UX
Hello All,
I need to bring down our old 9000 series d350, but my supervisor wants an ignite backup created. I cannot find ignite in the usual places (/opt/ignite) nor can I find it in swlist. As far as I can tell the cd's are long gone.
Is there anywhere else I could look for ignite being... (6 Replies)
Discussion started by: stay0ut
6 Replies
6. HP-UX
Hi
Can I use a vpar as an ignite server? (1 Reply)
Discussion started by: mahlathini
1 Replies
7. AIX
Hi All,
Does AIX has utility like ignite server to make remote os installation using image (2 Replies)
Discussion started by: jayannair
2 Replies
8. HP-UX
I am looking to make bootable tape backups of four machines running HP-UX 09.02, 09.05 and 09.07.
I successfully located Ignite 10.20 and installed it and made a backup on the one machine running HP-UX 10.20. I am having trouble locating information about Ignite for HP-UX 9. Does it exist? Is... (3 Replies)
Discussion started by: whack_job
3 Replies
9. HP-UX
I've read the Ignite User/Admin Guide but I'm having trouble figuring out if I can do a make_net_recovery if the ignite server and client server are on completely different networks? If this can be done is there any special configuration? If I initiate the command from the server it looks like it... (3 Replies)
Discussion started by: gonzotonka
3 Replies
10. HP-UX
Works all.
Depot shared via nfs
dhcp working
setting file system,network,root password,etc
But when i start "go!" with installation,give me
this error.
How to fix,debug?
Thanks
http://s24.postimg.org/5hzbgk551/unixbell3.png (3 Replies)
Discussion started by: Linusolaradm1
3 Replies
LEARN ABOUT OSF1
volreattach
volreattach(8) System Manager's Manual volreattach(8)
NAME
volreattach - Reattaches disk drives that have once again become accessible
SYNOPSIS
/usr/sbin/volreattach [-rb] [accessname...]
/usr/sbin/volreattach -c accessname
OPTIONS
The volreattach utility has the following options: Calls the volrecover utility to attempt to recover stale plexes of any volumes on the
failed disk. Performs the reattach operation in the background. Checks whether a reattach is possible. No operation is performed, but the
name of the disk group and disk media name at which the disk can be reattached is displayed.
DESCRIPTION
The volreattach utility attempts to reattach disks using the same disk group and media names they had before detachment.
This operation may be necessary if a disk has a transient failure, or if some disk drivers are unloaded or unloadable when the Logical
Storage Manager is started, causing disks to enter the failed state.
If the problem is fixed, the volreattach command can be used to reattach the disks without plexes being flagged as stale, as long as the
reattach happens before any volumes on the disk are started.
The volreattach command is called from the voldiskadm menus as part of disk recovery.
The volreattach utility tries to find a disk with a disk group and disk ID matching that of the disk(s) being reattached. If the matching
disk is found, the reattach operation may still fail if the original cause (or some other cause) for the disk failure still exists.
EXIT CODES
A zero exit status is returned if it is possible to perform a reattach. Otherwise, non-zero is returned.
SEE ALSO
volintro(8), voldiskadm(8), volrecover(8)
volreattach(8)