netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
default openrg.home 0.0.0.0 UG 0 0 0 wlan0
link-local * 255.255.0.0 U 0 0 0 wlan0
192.168.1.0 * 255.255.255.0 U 0 0 0 wlan0
server1@server1:~$ netstat -rn -A inet6
Kernel IPv6 routing table
Destination Next Hop Flag Met Ref Use If
::1/128 :: U 256 0 0 lo
fe80::/64 :: U 256 0 0 wlan0
::/0 :: !n -1 1 3755 lo
::1/128 :: Un 0 4 47 lo
fe80::224:2cff:fe49:d1d8/128 :: Un 0 1 0 lo
ff00::/8 :: U 256 0 0 wlan0
::/0 :: !n -1 1 3755 lo
ping6 to google
Code:
server1@server1:~$ ping6 ipv6.google.com
connect: Network is unreachable
ping6 to local host
Code:
server1@server1:~$ ping6 localhost
PING localhost(localhost) 56 data bytes
64 bytes from localhost: icmp_seq=1 ttl=64 time=0.066 ms
64 bytes from localhost: icmp_seq=2 ttl=64 time=0.088 ms
64 bytes from localhost: icmp_seq=3 ttl=64 time=0.080 ms
^C
--- localhost ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.066/0.078/0.088/0.009 ms
I am totally confused
To add to my confusion:
Code:
root@server1:/home/server1# host -t AAAA www.cyberciti.biz
www.cyberciti.biz has no AAAA record
root@server1:/home/server1# lsmod | grep -qw ipv6 && echo "IPv6 kernel driver loaded and configured." || echo "IPv6 not configured and/or driver loaded on the system."
IPv6 not configured and/or driver loaded on the system.
root@server1:/home/server1# ip -6 addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 fe80::224:2cff:fe49:d1d8/64 scope link
valid_lft forever preferred_lft forever
Last edited by Meow613; 10-05-2016 at 08:16 PM..
Reason: .
Hi everyone,
I have a weird problem in Linux. Well, for the past month i've been very interested in IPv6, and, a couple of days ago i decided to try to get it to work. I run Slackware 8.0 on my gateway/router-box, and, the freenet6.com-program and scripts started and worked just fine. There's one... (1 Reply)
Hello guyz..
did some of u have implement or making a testbed for IPv6?
if yes, can u attached the procedures and standard guidelines because i really need for my proposal..
thanx.. (2 Replies)
Hi! I have to configure ipv6 network between two computers with Solaris 10 but I not an expert in using any unix system and I do it becouse I need it to my study. Is someone here who could help me and describe step-by-step how to do it? please!!!
PS. I need to configure network to do secure... (1 Reply)
I am currently trying to setup static ipv6 address with a persistent default gateway. This is on a Solaris 10 non global zone running inside a Solaris 10 global zone. My production server I am comparing against is a Solaris 10 xen instance running on a Oracle Solaris xen instance.
I have got... (12 Replies)
my problem: i want to change from ipv4 to ipv6 on my home network.
On hpux i can assign only address non routable as fe80::1 fe80::3 etc to my lan0
Editing netconf-ipv6 i can assing a routable ipv6 address like
fd55:282f:3b98::/48
or
2001:470:26:307:89a0:aba1:f98b:eb3e
but only to alias... (0 Replies)
Hi,
I have created a bonding bond1 interface with 6 Eth , mode=4. Recently i have changed my old ipv6 to new one and tried to restart as well as reload network service. Post which i can see old as well as changed ipv6 in ifconfig command output. Below are few files and command output for your... (1 Reply)
Hello Dears ,
please I need your support I have Oracle Solaris 10 X86 server please if you can advise how can I add IP v6 on my server and if IPv6 was disabled how can i enable it also how can i add two IP (v4 and v6) on the same interface or I have to add another interface .
Thanks in... (1 Reply)