at the end of October i upgraded the distro to 8.10 at first it seemed fine until i restarted my machine the boot seqence started i logged in after that nothing? tried booting again and the same thing happened did i do something wrong during the upgrade to 8.10 did everything the computer asked me... (1 Reply)
Dear all,
I have created a KornShell script containing swiches with getopts (command line switches). Normally, my script should work like this:
$ ./myscript.ksh -a 12 -b 4 -c 78
The switch a was selected with the argument 12
The switch b was selected with the argument 4
The switch c was... (3 Replies)
When I try to speak to the microphone, there is no echo in the speaker. I test it again by dialing Skype, there is still no sound in my side while I can hear the other side.
What can I do?
Thanks in advance! (4 Replies)
Hi all,
I'm having a problem here my environment as follows.
AIX 5.3 TL 10 running on a P6 p520 sever with 3 fibre channel cards and Tivoli Storage Manager TSM 5.4 and TS3200 Tape Library with 2 drives and 2 media changers.
My problem as follows smc1 doesn't show up , I ran cfgmgr multiple... (6 Replies)
Hi all,
I have a problem here
root@host1 / # lsdev -Cc tape
rmt0 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP)
rmt1 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP)
smc0 Defined 07-00-02 IBM 3573 Tape Medium Changer (FCP)
root@host1 / # cfgmgr -l fcs2
Method error... (2 Replies)
Hi, I have a question.
I define a function using sed command:
replace()
{
searchterm=$1
replaceterm=$2
sed -e "s/$searchterm/$replaceterm/ig" $3 > $WORK'tempfile.tmp'
mv $WORK'tempfile.tmp' $3
}
Then I call
replace 'test = 0' 'test = 1' $myfileThis code works well in... (1 Reply)
Hi, I have a question.
I define a function using sed command:
replace()
{
searchterm=$1
replaceterm=$2
sed -e "s/$searchterm/$replaceterm/ig" $3 > $WORK'tempfile.tmp'
mv $WORK'tempfile.tmp' $3
}
Then I call
replace 'test = 0' 'test = 1' $myfile
This code... (1 Reply)
Hi,
My environement
OS: Linux Fedora Core 17 X86_64
KSH version: sh (AT&T Research) 93u+ 2012-08-01
As I understand inside a Kornshell script, the getopts statement allows to collect information about the switches provided for the script (if any). Besides, it is possible to... (3 Replies)
I have a Dell XPS M1330 laptop. The OS is Windows 10. I had to replace the motherboard because it was bad. After replacing the motherboard I noticed the optical (DVD/CD) drive is neither detected in BIOS and OS nor making any noise at all. Everything else seems to be working fine. The optical drive... (3 Replies)
Discussion started by: milhan
3 Replies
LEARN ABOUT FREEBSD
if_wpi
WPI(4) BSD Kernel Interfaces Manual WPI(4)NAME
wpi -- Intel 3945ABG Wireless LAN IEEE 802.11 driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device wpi
device wpifw
device pci
device wlan
device wlan_amrr
device firmware
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_wpi_load="YES"
DESCRIPTION
The wpi driver provides support for the Intel 3945ABG Wireless network adapter. wpi supports station, adhoc, and monitor mode operation.
Only one virtual interface may be configured at any time. For more information on configuring this device, see ifconfig(8).
This driver requires the firmware built with the wpifw module to work.
FILES
/usr/share/doc/legal/intel_wpi/LICENSE wpi firmware license
EXAMPLES
Join an existing BSS network (i.e., connect to an access point):
ifconfig wlan0 create wlandev wpi0 inet 192.168.0.20
netmask 0xffffff00
Join a specific BSS network with network name ``my_net'':
ifconfig wlan0 create wlandev wpi0 ssid my_net up
Join a specific BSS network with 64-bit WEP encryption:
ifconfig wlan0 create wlandev wpi0 ssid my_net
wepmode on wepkey 0x1234567890 weptxkey 1 up
Join a specific BSS network with 128-bit WEP encryption:
ifconfig wlan0 create wlandev wpi0 wlanmode adhoc ssid my_net
wepmode on wepkey 0x01020304050607080910111213 weptxkey 1
DIAGNOSTICS
wpi%d: could not load firmware image '%s' The driver failed to load the firmware image using the firmware(9) subsystem. Verify the wpifw
firmware module is installed.
wpi%d: fatal firmware error An unknown error has occurred in the uploaded firmware, you may have to unload/reload the driver to continue.
wpi%d: Radio transmitter is switched off The hardware switch controlling the radio is currently turned off. Data transmission is not possi-
ble in this state.
SEE ALSO pci(4), wlan(4), wlan_ccmp(4), wlan_tkip(4), wlan_wep(4), wpifw(4), ifconfig(8), wpa_supplicant(8)AUTHORS
The original wpi driver was written for OpenBSD by Damien Bergamini <damien.bergamini@free.fr>. Benjamin Close <benjsc@FreeBSD.org> ported
wpi to FreeBSD.
BUGS
Not all the error messages are documented here.
Background scanning is not currently supported.
BSD October 5, 2008 BSD