at the end of October i upgraded the distro to 8.10 at first it seemed fine until i restarted my machine the boot seqence started i logged in after that nothing? tried booting again and the same thing happened did i do something wrong during the upgrade to 8.10 did everything the computer asked me... (1 Reply)
Dear all,
I have created a KornShell script containing swiches with getopts (command line switches). Normally, my script should work like this:
$ ./myscript.ksh -a 12 -b 4 -c 78
The switch a was selected with the argument 12
The switch b was selected with the argument 4
The switch c was... (3 Replies)
When I try to speak to the microphone, there is no echo in the speaker. I test it again by dialing Skype, there is still no sound in my side while I can hear the other side.
What can I do?
Thanks in advance! (4 Replies)
Hi all,
I'm having a problem here my environment as follows.
AIX 5.3 TL 10 running on a P6 p520 sever with 3 fibre channel cards and Tivoli Storage Manager TSM 5.4 and TS3200 Tape Library with 2 drives and 2 media changers.
My problem as follows smc1 doesn't show up , I ran cfgmgr multiple... (6 Replies)
Hi all,
I have a problem here
root@host1 / # lsdev -Cc tape
rmt0 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP)
rmt1 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP)
smc0 Defined 07-00-02 IBM 3573 Tape Medium Changer (FCP)
root@host1 / # cfgmgr -l fcs2
Method error... (2 Replies)
Hi, I have a question.
I define a function using sed command:
replace()
{
searchterm=$1
replaceterm=$2
sed -e "s/$searchterm/$replaceterm/ig" $3 > $WORK'tempfile.tmp'
mv $WORK'tempfile.tmp' $3
}
Then I call
replace 'test = 0' 'test = 1' $myfileThis code works well in... (1 Reply)
Hi, I have a question.
I define a function using sed command:
replace()
{
searchterm=$1
replaceterm=$2
sed -e "s/$searchterm/$replaceterm/ig" $3 > $WORK'tempfile.tmp'
mv $WORK'tempfile.tmp' $3
}
Then I call
replace 'test = 0' 'test = 1' $myfile
This code... (1 Reply)
Hi,
My environement
OS: Linux Fedora Core 17 X86_64
KSH version: sh (AT&T Research) 93u+ 2012-08-01
As I understand inside a Kornshell script, the getopts statement allows to collect information about the switches provided for the script (if any). Besides, it is possible to... (3 Replies)
I have a Dell XPS M1330 laptop. The OS is Windows 10. I had to replace the motherboard because it was bad. After replacing the motherboard I noticed the optical (DVD/CD) drive is neither detected in BIOS and OS nor making any noise at all. Everything else seems to be working fine. The optical drive... (3 Replies)
Discussion started by: milhan
3 Replies
LEARN ABOUT LINUX
pcic
PCIC(4) BSD Kernel Interfaces Manual PCIC(4)NAME
pcic -- PC Card bridge driver
SYNOPSIS
device pcic
device pccard
DESCRIPTION
The pcic driver provides support for older ISA and non-Yenta PCI PC Card bridges. The pcic driver supports most ExCA devices attached to the
ISA bus or PCI devices that do not conform to the Yenta specification.
The following ISA devices, or true clones, are supported in the current code.
Intel i82365SL Step A
Intel i82365SL Step B
Intel i82365SL Step C Intel's original 16-bit PC Card controller.
Intel i82365SL-DF Intel's last version of this device. 3.3V support was added.
VLSI 82C146 An older VLSI part with some issues on some machines.
Cirrus Logic PD-6710
Cirrus Logic PD-6720
Cirrus Logic PD-6722 Cirrus Logic's pcic controller. Compatible with the i82365SL Step C with the addition of a different 3.3V control.
Ricoh RF5C296
Ricoh RF5C396 Ricoh's PC Card bridge chips. These are compatible with the i82365SL Step C, but with yet another different 3.3V con-
trol.
Vadem 365
Vadem 465 Compatible with i82365SL Step C.
Vadem 468
Vadem 469 Like the earlier Vadem models, but with Vadem's own, incompatible, 3.3V control system.
IBM PCIC IBM clone of the original i82365SL part, with its own ID register value. Has no 3.3V ability.
Many other vendors made parts in this arena, but most of them were compatible with one of the above chipsets.
The following PCI pcmcia bridges are supported:
Cirrus Logic PD6729
Cirrus Logic PD6730
O2micro OZ6729
O2micro OZ6730
BUGS
This does not work at all at the moment.
BSD July 9, 2002 BSD
09-28-2016
