My AIX server able to detect the LUN's which is mapped from IBM v7k storage, And i allocated one more LUN from HP storage but it's appear two hdisk instead of one and it's showing incorrect LUN ID.
SDDPCM driver already installed on this server.
During cfgmgr, Im getting this message :
please advise on this...
Last edited by rbatte1; 09-19-2016 at 07:26 AM..
Reason: Added CODE tags
I have a P570 that for some reason is not allowing the P1-T6 NIC to be recognized. I have confirmed from the HMC that it is set for the LPAR, but when I do a cfgmgr, it won't recognize it. It though is recognizing the slot cards just fine which are P1-C3 for one shelf and P1-C3 of another shelf.... (1 Reply)
Hi - can anybody tell me what the default behaviour is for cfgmgr when it allocates hdisk numbers to newly discovered disks in the ODM ? I want to add a disk from our FAStT700 SAN disk array and import it on our p-series (AIX 5.2). Problem is we import and export Flashcopy devices fror scripted... (5 Replies)
Hi All,
I remember my old senior mentor in AIX that cfgmgr should not be terminated on your console. Because if it's terminated in the middle, the odm might get corrupted.
Is that true for AIX 5.x?
Regards,
itik (1 Reply)
Hi all,
I have a System i server with a couple of AIX LPARs.
One of the LPARs owns a dual-channel scsi adapter to which I connect a tape library (IBM TS3100) and a DVD Drive.
I had some problems to get the Tape Library detected but finally I got it:
rmt0 Available 03-08-01-4,0 IBM 3580... (1 Reply)
OS: AIX 6.1
The host has a dual port NIC installed and when I went to run `cfgmgr -v` to configure it I got an error showing device packages are missing from the install:
`cfgmgr -v` on 10.15.xx.xxx
cfgmgr: 0514-621 WARNING: The following device packages are required for device support but... (3 Replies)
Hi
When I run cfgmgr -v in my aix box I get the below error :
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.
devices.loopback
My oslevel is 6100-06-02-1044
Please assist.
Please use and tags when... (3 Replies)
im kinda new to shell scripting so i need some help
i try to run this script and get the error code
> 5 ")syntax error: operand expected (error token is "
the code for the script is
#!/bin/sh
#
# script to see if the given value is correct
#
# Define errors
ER_AF=86 # Var is... (4 Replies)
Dear all
i have a sun SL500 tape library attached to my AIX box while issue the command cfgmgr i have the below issue
test>cfgmgr
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.
devices.fcp.changer
please... (3 Replies)
I have two servers with a fresh install of Solaris 11, and having problems when doing rpcinfo between them. There is no firewall involved, so everything should theoretically be getting through. Does anyone have any ideas? I did a lot of Google searches, and haven't found a working solution yet.
... (2 Replies)
Hi,
From the man page, cfgmgr configures devices and optionally installs device software by running the programs specified in the Configuration Rules object class and it is not dependent on platform .
Are there any fundamental differences impacting the speed of cfgmgr on a stand-alone and... (5 Replies)
Discussion started by: Sachin1987
5 Replies
LEARN ABOUT DEBIAN
ql-dynamic-tgt-lun-disc
ql-dynamic-tgt-disc(8) System Administration ql-dynamic-tgt-disc(8)NAME
ql-dynamic-tgt-lun-disc - Scans for newly added LUNs.
SYNOPSIS
ql-dynamic-tgt-lun-disc [OPTIONS]
DESCRIPTION
Dynamic TGT-LUN Discovery Utility
This utility scans for newly added LUNs. After adding new LUNs, you do not need to unload, then load the QLogic FC driver or reboot the
system
To begin scanning the LUNs issue following command:
# /usr/sbin/ql-dynamic-tgt-lun-disc
-al, --allow-lip
LIP is not issued by default, even if it is required for scanning new LUNs Setting this option, allows the utility to issue LIP.
-cl, --current-luns
Displays LUNS currently present
-e, --extended-scan
Use this option as "-e | --extended-scan". to rescan LUNs. This will identify any change in attributes of existing LUNs. This option
can be used in combination of scan/refresh or max luns
-h, --help, ?
Prints this help message
-i, --interactive
Use this option to use the menu driven program
-is, --iscsi
Use this option to operate on ISCSI HBAs, this option can be used in combination of any other supported option.
-m, --max-lun
To set the maximum LUNs to be scanned
-p, --proc
Use PROC file system for LUN scanning
-r, --refresh
To refresh, that is remove LUNs that are lost use the options "-r|--refresh". This will remove the LUNs which no more exist.
-s, --scan [ -r|--refresh ]
The QLogic LUN scan utility re-scans all the devices connected to the QLogic HBA
SEE ALSO ql-lun-state-online(8), ql-hba-snapshot(8), ql-set-cmd-timeout(8)Matthias Schmitz <matthias@sigxcpu.org> July 2009 ql-dynamic-tgt-disc(8)