This post was from a while ago, but i'll answer in case anyone finds this in a search looking for an answer.
The short answer is that there is nothing you need to do. If you shut one down the services should fail over automatically. The command to move a rgmanager service from one host to another is:
For example:
All of this assumes that the services have been configured correctly and with best practice.
Hello,
Under ksh I have to run a script on one of the nodes of a Solaris 8 cluster which at some time must execute a command on the alternate node:
# rsh <name> "command"
I have to implement this script on all the clusters of my company (a lot of...).
Fortunately, the names of the two nodes... (11 Replies)
My apologies in advance if this question has already been asked or if I use incorrect terminology; I have tried searching for nearly an hour without any luck.
Is there any way to change the active TTY for a session? I was monitoring a long (~5 hour) process through an SSH connection and the... (4 Replies)
Hi,
Please advise me whereas I have two node cluster server configured with MC/SG. Application and DB are running on Node 1, while Node 2 is standby.
All the volume group devices are part of cluster environment. There is only one package running at node 1.
Node 2 is having the problem to... (1 Reply)
hi,
i am trying to setup a 2 node cluster environment. following is what i have;
1. 2 x sun ultra60 - 450MHz procs, 1GB RAM, 9GB HDD, solaris 10
2. 2 x HBA cards
3. 2 x Connection leads to connect ultra60 with D1000
4. 1 x D1000 storage box.
5. 3 x 9GB HDD + 2 x 36GB HDD
first of all,... (1 Reply)
Hi,
Is it possible to have a Solaris cluster of 2 nodes at SITE-A using SVM and creating metaset using say 2 LUNs (on SAN). Then replicating these 2 LUNs to remote site SITE-B via storage based replication and then using these LUNs by importing them as a metaset on a server at SITE-B which is... (0 Replies)
I have installed sun cluster 3.2 on two sprac servers. Configured a failover resource group. Added a LogicalHostname resource to it. LogicalHostname is also added to /etc/hosts with ip address.
I am able to access cluster by share ip used for logical hostname but when i try to switch the resource... (0 Replies)
Setting up HACMP 6.1 on a two node cluster. The other node works fine and can start properly on STABLE state (VGs varied, FS mounted, Service IP aliased). However, the other node is always stuck on ST_JOINING state. Its taking forever and you can't stop the cluster as well or recover from script... (2 Replies)
Discussion started by: depam
2 Replies
LEARN ABOUT CENTOS
crm_node
PACEMAKER(8) System Administration Utilities PACEMAKER(8)NAME
Pacemaker - Part of the Pacemaker cluster resource manager
SYNOPSIS
crm_node command [options]
DESCRIPTION
crm_node - Tool for displaying low-level node information
OPTIONS
-?, --help
This text
-$, --version
Version information
-V, --verbose
Increase debug output
-Q, --quiet
Essential output only
Stack:
-A, --openais
Only try connecting to an OpenAIS-based cluster
-H, --heartbeat
Only try connecting to a Heartbeat-based cluster
Commands:
-n, --name
Display the name used by the cluster for this node
-N, --name-for-id=value
Display the name used by the cluster for the node with the specified id
-e, --epoch
Display the epoch during which this node joined the cluster
-q, --quorum
Display a 1 if our partition has quorum, 0 if not
-l, --list
Display all known members (past and present) of this cluster (Not available for heartbeat clusters)
-p, --partition
Display the members of this partition
-i, --cluster-id
Display this node's cluster id
-R, --remove=value
(Advanced) Remove the (stopped) node with the specified name from Pacemaker's configuration and caches
In the case of Heartbeat, CMAN and Corosync 2.0, requires that the node has already been removed from the underlying cluster
Additional Options:
-f, --force
AUTHOR
Written by Andrew Beekhof
REPORTING BUGS
Report bugs to pacemaker@oss.clusterlabs.org
Pacemaker 1.1.10-29.el7 June 2014 PACEMAKER(8)