These flags get added during next boot. As long as you see "u" flag for the new disk and no "UPPERCASE" flags (ie. WMDFSRB) present you are good with SVM.
Just ensure the
Code:
metadevadm -u <cXtXdX>
command executed after any disk change with the replaced device name. This command update the device relocation information. You can check this by running
Code:
metastat
and look for the last few lines of output
Hi rinjohn,
Thanks for your reply. If I have done the following
Code:
1) remove the metadevice of the old disk/slice
2) remove the slice of old disk from metadb
3) replace old disk with new disk
4) add the slice of the new disk to metadb
5) recreate a metadevice
Do I still need to issue metadevadm ? -- thought when I add the new slice to metadb , the deviceID will be added automatically ?
I'm running sun volume manager on solaris 9. I have two hotspares and
are currently on standby. Both are not being utilized.
Can I newfs both of them? Do I need to deleted the hostpares first,
then newfs?
hsp002: 2 hot spares
Device Status Length Reloc
... (3 Replies)
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
Hi all,
I have a problem with vxvm volume which is mirror with two disks. when i am try to increase file system, it is throwing an ERROR: can not allocate 5083938 blocks, ERROR: can not able to run vxassist on this volume.
Please find a sutable solutions.
Thanks and Regards
B. Nageswar... (0 Replies)
Hello friends,
I need to test some of the solaris 10 concepts and veritas volume manager.i want to know ,where i get the testing labs or E-labs(online) for this practice.i ready to pay for this labs.pls kindly help me to get the details or website names...Thanks in Advance
-Jay (6 Replies)
Hi All,
I have to do disk mirroring, for that I have to create a metadb as disk mirroring have to do with SVM. However I do not have any slice free for metadb.
What are the options? Please suggest (4 Replies)
Hello All,
I have small doubt. It's related to SVM in solaris 10. I have created raid 0 (striping) using 3 slices of 500 MB size (default interlace value as 32KB)
d2: Concat/Stripe ---- Interlace value is 32 KB
Size: 2923830 blocks (1.4 GB)
Stripe 0: (interlace: 64 blocks)
Device Start... (1 Reply)
Hi Friends,
I have to migrate my raid-1 volume to raid -5 online.
Can anyone please help me, If possible then send me the step by step commands for online migration.
Thanks in advance. (2 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Hello Admins..
I am going through solaris volume manager guide for RAID-0 concatenation and stripes, I do not understand the concept of stripe from following example of concatenation.
There is an eample for concatenation:
# metainit d25 1 1 c0t1d0s2
d25: Concat/Stripe is setup
the... (5 Replies)
Discussion started by: snchaudhari2
5 Replies
LEARN ABOUT LINUX
metaroot
metaroot(1M)metaroot(1M)NAME
metaroot - setup system files for root (/) metadevice
SYNOPSIS
/usr/sbin/metaroot -h
/usr/sbin/metaroot [-n] [-k system-name] [-v vfstab-name] [-c mddb.cf-name] [-m md.conf-name] [-R root-path] device
The metaroot command edits the /etc/vfstab and /etc/system files so that the system may be booted with the root file system (/) on an
appropriate metadevice. The only metadevices that support the root file system are a stripe with only a single slice or a mirror on a sin-
gle-slice stripe.
If necessary, the metaroot command can reset a system that has been configured to boot the root file system (/) on a metadevice so that it
uses a physical slice.
Root privileges are required for all of the following options except -h.
The following options are supported:
-c mddb.cf-name Use mddb.cf-name instead of the default /etc/lvm/mddb.cf file as a source of metadevice database locations.
-h Display a usage message.
-k system-name Edit a user-supplied system-name instead of the default /etc/system system configuration information file.
-m md.conf-name Edit the configuration file specified by md.conf-name rather than the default, /kernel/drv/md.conf.
-n Print what would be done without actually doing it.
-R root-path When metaroot modifies system files, it accesses them in their relative location under root-path.
The -R option cannot be used in combination with the -c, -k,-m, or -v options.
Note - The root file system of any non-global zones must not be referenced with the -R option. Doing so might damage the
global zone's file system, might compromise the security of the global zone, and might damage the non-global zone's
file system. See zones(5).
-v vfstab-name Edit vfstab-name instead of the default /etc/vfstab table of file system defaults.
The following operands are supported:
device Specifies either the metadevice or the conventional disk device (slice) used for the root file system (/).
Example 1: Specifying Root File System on Metadevice
The following command edits /etc/system and /etc/vfstab to specify that the root file system is now on metadevice d0.
# metaroot d0
Example 2: Specifying Root File System on SCSI Disk
The following command edits /etc/system and /etc/vfstab to specify that the root file system is now on the SCSI disk device
/dev/dsk/c0t3d0s0.
# metaroot /dev/dsk/c0t3d0s0
/etc/system System configuration information file. See system(4).
/etc/vfstab File system defaults.
/etc/lvm/mddb.cf Metadevice state database locations.
/kernel/drv/md.conf Configuration file for the metadevice driver, md.
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWmdu |
+-----------------------------+-----------------------------+
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaoffline(1M), metaonline(1M), metaparam(1M),
metarecover(1M), metarename(1M), metareplace(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4),
md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D)
6 Apr 2005 metaroot(1M)