Udev Rule TAG for identifying a local sas disk, non-scsi, non-fiber, non-iscsi
I need to add a VMware virtual disk to the 99-oracle-asmdevices.rules file but the OS is not assigning a WWID to the disk. It has been fdisk'd and a single partition created.
What TAG inside the file needs to be added? the Program scsi-id does not work for some reason. latest patches has been installed from redhat.
I have to use udisks --show-info /dev/sdb (yes thats the device).
I have attached the output from the above command.
here is my 99-oracle-asmdevices file.
hi, i removed a FC disk (it has a single VG on it) from a AIX 6.1 server and exported it to another AIX server. after doing cfgmgr -v .. the disk showed up in the second AIX 6.1 server. Now how can i see the data which is on the disk from the second AIX server. (5 Replies)
I was wondering if anyone knew of any tools that would identify generic scsi disks on servers running AIX 5.3? Going through diag into the hot plugs does not work. I know it used to for 4.3 on some servers I managed with generic scsi but for some reason I either dont the option to choose a disk... (2 Replies)
Hi All,
Recently I'm taking my first steps in AIX, initially with no real issues. Until now, off course...
I hooked up a couple of iSCSI disks to the system, with a RHEL5 machine running tgt on the other side. When running cfgmgr after initial configuration, I got an error:
# cfgmgr -l... (4 Replies)
Hi,
I have a very frustrating issue! I hope you guys can assist
When a disk is presented out the iSCSI target display a lower disk capacity
SOLARIS VERSION is SOLARIS 10 05/09 Kernel Patch 139555-31
ISCSI Patch 119090-31, 141878-11
Unix Commands To discover Target
bash-3.00# i... (0 Replies)
Hi,
Is there an easy way to find the disk-type from the command line or with another api ? sdparm works for SAS but not for SATA, hdparm works for SATA but not SAS.
Thanks (1 Reply)
On a test server running CentOS 6, I try to permanently set the owner, group and mode of disk devices for use with a DB2 database. For this I created an udev rule file /etc/udev/rules.d/99-db2.rules:
KERNEL=="sdb*", OWNER="db2usrl1", GROUP="db2adml1", MODE="0600"
After a reboot, the owner and... (4 Replies)
Hello,
whenever I plugin my webcam, I want to use its microphone instead of the one integrated in my laptop.
I therefore created a udev rule:
SUBSYSTEM=="usb", ATTR{idVendor}=="046d", ATTR{idProduct}=="0807", RUN+="/usr/local/bin/webcammic"This rule works, I've tested it with a testscript (the... (0 Replies)
Hi all,
Is there anyway i can control the naming of the disk device ?
I have added an iscsi disk on server1 using iscsiadm , devfsadm and it is now showing as
/dev/dsk/c2t0d0 in node1
However, i am worried that the same disk will appear as
/dev/dsk/cXtXd0 in node2
This iscsi disk(lun)... (0 Replies)
OSLevel: 5300-10-02-0943
System Model: IBM,8203-E4A
Power 6
==
Hi!
I replaced a failed pdisk in the raid enclosure as follows,
- rmdev -l 'pdisk18' '-d'
- Replaced it.
- cfgmgr (detected)
- I can see the new drive, with the correct serial #
lscfg -v -l pdisk18
pdisk18... (2 Replies)
Hello,
I would like to check how many SAS disks and its size per disk for the whole power system. As per my understanding, if we assign the SAS controller to LPAR, then we can see the disk in lpar smitty command.
How can we check from the Power machine(physical ones) as well? I think the... (5 Replies)
Discussion started by: Phat
5 Replies
LEARN ABOUT OPENDARWIN
partx
PARTX(8) System Administration PARTX(8)NAME
partx - tell the kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-P|-r|-s|-u] [-t type] [-n M:N] [-] disk
partx [-a|-d|-P|-r|-s|-u] [-t type] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It can also tell the kernel to add or remove
partitions from its bookkeeping.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were a whole disk (for example
to list nested subpartitions), use the argument "-" (hyphen-minus). For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than as a partition.
partx is not an fdisk program - adding and removing partitions does not change the disk, it just tells the kernel about the presence and
numbering of on-disk partitions.
OPTIONS -a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the SIZE column in bytes rather than in human-readable format.
-d, --delete
Delete the specified partitions or all partitions.
-g, --noheadings
Do not print a header line with --show or --raw.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in favour of --show. Do not
use it in newly written scripts.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format M-N is supported. The range may contain negative num-
bers, for example --nr -1:-1 means the last partition, and --nr -2:-1 means the last two partitions. Supported range specifications
are:
M Specifies just one partition (e.g. --nr 3).
M: Specifies the lower limit only (e.g. --nr 2:).
:N Specifies the upper limit only (e.g. --nr :4).
M:N Specifies the lower and upper limits (e.g. --nr 2:4).
-o, --output list
Define the output columns to use for --show, --pairs and --raw output. If no output arrangement is specified, then a default set is
used. Use --help to get list of all supported columns. This option cannot be combined with the --add, --delete, --update or --list
options.
-P, --pairs
List the partitions using the KEY="value" format.
-r, --raw
List the partitions using the raw output format.
-s, --show
List the partitions. The output columns can be selected and rearranged with the --output option. All numbers (except SIZE) are in
512-byte sectors.
-t, --type type
Specify the partition table type.
--list-types
List supported partition types and exit.
-u, --update
Update the specified partitions.
-S, --sector-size size
Overwrite default sector size.
-v, --verbose
Verbose mode.
-V, --version
Display version information and exit.
-h, --help
Display help text and exit.
EXAMPLES
partx --show /dev/sdb3
partx --show --nr 3 /dev/sdb
partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 5 /dev/sdb
Prints the start sector of partition 5 on /dev/sdb without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
SEE ALSO addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)AUTHORS
Davidlohr Bueso <dave@gnu.org>
Karel Zak <kzak@redhat.com>
The original version was written by Andries E. Brouwer <aeb@cwi.nl>.
ENVIRONMENT
LIBBLKID_DEBUG=all
enables libblkid debug output.
AVAILABILITY
The partx command is part of the util-linux package and is available from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils
/util-linux/>.
util-linux December 2014 PARTX(8)